How to Tune Up a Toro Snowblower
Вставка
- Опубліковано 22 гру 2010
- Mark explains how to perform a seasonal snowblower tune-up on a Toro single stage snowblower.
Get replacement spark plugs and other Toro snowblower parts here:
www.ereplacementparts.com/toro...
For snowblower parts from other brands, visit: www.ereplacementparts.com/ryob...
SUBSCRIBE AND NEVER MISS ANOTHER VIDEO!
ua-cam.com/users/subscription_c...
CONNECT WITH US!
Google+ ► plus.google.com/1119920104886...
Facebook ► / replacementparts
Twitter ► / toolparts
Linkedin ► / ereplacementparts.com
eReplacementParts ► www.ereplacementparts.com/
THANKS FOR WATCHING!
Don't forget to LIKE and SHARE this video to help pass along helpful information to your friends! Your feedback and inquiries are also welcome so let us hear what you have to say with a comment below. - Навчання та стиль
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
Would like to have seen this video a few years ago. Your comment that the repair shop is quite expensive is right on. I used to pay just under $200 for everything shown in the video. I can do all that myself and only have to pay for parts replacement. Great video. I have a Toro CCR2000 4.5 HP purchased in 1998 for $745. I've paid for it in Toro service repair more than 3 times over. With your great instructional video I will no longer pay for those services.
Thanks much Mark for the in depth video presentation. I was ready to go spend $100 to have some tech do just that. Keep up the great work!
@stephanpatko The fuel filter is Briggs & Stratton part #394358S. It is the same filter that is used on most Toro snowblowers.
Thanks for watching,
-Mark
@MrRmh3481 those pliers are pretty cool huh? They are made by Blue Point which is a Snap-On brand. I purchased them from my local Snap-On dealer.
Thanks for watching!
-Mark
Spot on!!!! When you think about it, repair shops must be hating You Tube.
NICE AND SIMPLE! THANK YOU!!!
Video was very helpful
Thanks for the info.!
Mark, haven't heard back on the tool brand for the fuel line clamping tool, guessing you haven't read comments yet. Good video, watched it again today, Thanks
Hi Mark, thank you for this very informative video. It's done step by step very easy to follow in fact I watched it once and serviced my CCR 2000. It starts with one pull however it seams and sounds like It is starving for fuel, wonder if you could help! Keep up the great work! Thank you.
George
hey thanks for the video very helpful
@MrFerrariman1 Toro has always used the one piece filter that we show in our video. I haven't seen one with a removable filter element before. That is a great idea though and if located correctly, it could really make the tune-up procedure much easier.
Thanks!
-Mark
I checked the filter-it was clear-the unit still only runs for a few seconds from the prime button & then stops.Do you have a video or any information on doing some r&r on the carburetor??
Mark, what brand is your fuel line clamping tool, looks like it well built. Please email me the brand if you could. Thank You, good video.
i need to tune up a toro snow blower. just watched your video. i need to buy some tools. Can you tell me the tool names and the sizes. maybe i can borrow them but need to know what to ask for. Thank you.
Mark-- Is there a spark plug gap measurement that needs to be checked when replacing with the new spark plug??
Are the filter and spark plug located in the same location on all the ccr2450 with the newer design prior to bein discontinued?
Very Helpful. Is there an air filter that needs to be cleaned or changed?
These Snow Blower models don't have an air filter because they aren't used in dusty conditions.
nice vid , I bought my diaphragm kit and gaskets from you guys 1980 s200. The one thing I failed to do was take proper note of my governor linkage and spring placement , can you give any help on that thanks
I haven't been able to locate any good or practical information to help with the governor spring location.
Great video but I cannot find a fuel filter for my Toro CCR 3000 GTS Model#38435/8903044 Can anyone help? I need a spark plug also. I had too many things on my plate this year and got a bit behind. I'm a single person and don't want to have to ask a guy to help me.
i was wondering what happened when i was snow blowing my snow blower stopped.now i can not restart, because i am not able to pull the starter cord i mean i can not pull starter cord.
HI Mark,
Where can I find those fuel line pliers your using?
hello - what is the p/n and cost for the fuel filter & spark plug on the toro snowblower tune up video? also I need the primer bulb cover - it fell apart. thanks.
+John Hampton The Plugs usually run from $2-$6.00 depending on the quality and manufacturer and the fuel filters around $-$3.00. These and the primer bulbs are usually very model specific. You can see the prices on line or if you'd like to write back with the model number from your blower we can check it out for you.
Mark, what material are the gasgets made of in a carburetor of a Toro ccr 2450?
Hello, unfortunately at this time we are unable to offer technical support.
do you not gap the new plug i see someone else asked and they got no answer
I have a similar snowblower. It starts and runs great for about 15 to 20 minutes then stall out, have to let it sit for a while then will start right up. Has me stumped. Any help would be appreciated.
+jordtizzle That's puzzling! When it stalls, have your checked to see if it has spark? On occasion the
Spark Coil will get hot and not produce spark until they cool. Another place to look would be the Carburetor. It may be getting hot and causing it to Vapor Lock and then works normally after the motor cools.
Be careful when you remove the control panel don’t pull it up like you do the cover or else you’ll rip out your ignition wires like I did
what cause the toro snowblower run full speed?
Hello, I own a Toro Snowblower and it runs at high speed all the time. If yours has a control cable connected to the carburetor, it may be worn or stretched and it will need to be replaced.
Does anyone have this problem, The snow blower starts easily, the engine runs well while warming up The Augur engages with no problem. However, the engine stops after the augur meets anything other than a little resistance from the snow. The engine just dies. It restarts with no problem and the cycle repeats.
Ron Grabski What model number is your snow blower?
Uh..ya forgot the carb. And what's up with your "ch" pronunciations?