We install All Terain tires, Brembo Brakes and Wheel Spacers on our Land Rover Discovery 3
Вставка
- Опубліковано 22 тра 2021
- #Landrover #LandroverDiscovery #LR3
We finally installed AT Tires on our Land Rover Discovery 3. Larger tires require special attention in Germany or they are not street legal. Find out what is important and enjoy the video
Thanks for watching,
Vera & Christian ,
We are not liable for any harm you do to your car, your engine, your surroundings or to yourself. Use the information given in this video at your own risk. The videos we provide are primarily for entertainment and not to be used as instructions. Any products and spare parts we use in our videos are chosen by us and not provided by any sponsors. We do not recommend the parts we use in our videos as we mostly use Aftermarket low-cost brands due to cost.
Become a Patreon and support our channel:
/ lrtime - Авто та транспорт
Whenever I watch one of your videos, I always find myself smiling all the way through it - thank you both!
🙏😊👍🙋♀️Vera
You two make my wife and I laugh so much with your friendly banter. We look forward to each video release and we don’t even own a Discovery. I bet you two love Dinner for One..... Same procedure as last year 😂.
I was very impressed with your solution to remove the broken recessed bolt, that was inspired. Thanks for sharing your adventures!!
🙏😃👍🙋♀️Vera
We love your vids 255-60r18 is the smart way when on the 30mm terra spacers not over 9.5 maximum looks good rides awesome done right 🔥👍😎regards from South Carolina
Awesome video. I look forward to Sunday evenings.
You two are a trip!!! Awesome! I can’t get enough! Thanks!
Fantastic teamwork 👏
Great video thanks for the insight on winter tyres
Great video as always and you make it look so easy. “Fantastic team work to get the job done”👍
Great video!! I'm learning alot about my LR3 (Discovery 3) from you guys. Looking forward to the next video!
Great video! I'm so happy for you!
Don't we all just love new tyres!
I love your channel the fluidity between you two is great and Christian makes light work easy.
Keep up the good work.
Another lovely video from a lovely couple. Paul.
Very nice !! Thinking of doing the same with my LR3. Your video has confirmed my decision.
Christian and Vera great entertainment from you two,))) great video and presentation, from over the pond)))),,,, 🇬🇧 😀
Great video Christian and Vera and superb scenery while driving. The new tyres look impressive on the Discovery. Now I want and ice cream lol :-)
You both make me happy when watching you
Another great video from you both 👍🇬🇧
We genuinely love your channel here in GB. Thanks for loving Land Rover
🙏😊🙋♀️Vera
The stance looks great.
I get a kick out of these vids. My old German relatives have passed on and I miss their German ways. Now I have Christian and Vera. And tho I am in the U.S. I have their humor to keep me sane once in awhile. Many Blessings friends!!😁
Great video showing how capable the LR can be
Great video as always very informative and fun you guys always give me a smile 😊
Great jobs again guys👍
Thank you for your entertaining and informative videos. Very refreshing to see some folks of my country doing good videos with character and knowledge. I would like to see you both changing differential, transfercase and maybe transmission fluid on your vehicles :) greetings from Meerbusch, NRW
This was our previous video ua-cam.com/video/znHMQbN6Its/v-deo.html . We changed the differential oil in the front. 🙋♀️ Vera
You guys grown so much since you started, im very happy for you. Professional grade informative videos with funny/romantic atmosphere around it...thank you guys!
🙏😊🙋♀️Vera
Like how the plate says DIRT 👍🏼😂
and 44 implies 4x4. It's the coolest license plate for Offroad vehicles in Germany, and I got it. 😅 👍🙋♀️ Vera
@@Vera_and_Christian Well wish i had a plate like that on my LR3 Vera but sadly mines is just a plain boring UK plate. Dean from sunny.....i mean rainy Scotland 🏴👍🏼😂
I love your videos guys, enjoying them here in South Africa! 🇿🇦
Tires look great, really adds to the stance of the Disco! Nice fun video, makes me miss Germany driving on the nice country roads but I don't miss the regulations hahahaha. I recently installed 265/65/18 BFG KO2 on my Lr4 :). Thanks
Very clever man and lovely couple.. very enjoyable
Thank you!
Excellent choice of tyres for the Disco but a bit of a rigmarole for the TUV! Thanks for the content 🏴
Fantastic videos you too are so funny you always bring a smile to face absolutely brilliant
Awesome video once again. I have these tyres on my Freelander 1 Td4 and like them very much. Take care both of you, thank you 😊
great vid,i put 30mm spacers on my d4 with 20's and its gone slightly twitchy,tracking was checked and is spot on,but looks amazing
You guys make me want a discovery even more 😂 just amazing cars
Another brilliant video guys , your car looks better with the wheel spacers .
Grabber AT3's are great tyres , i use them in winter here in the UK .
this LR3 is beautiful and the tires are TOP
Very nice modification, the car looks more purposeful now.
Another great video and very enjoyable. I have driven my GG AT3 at 130 KPH with the vehicle fully loaded from northern France to Spain and they handle very well at the higher speeds. It's important to rotate the GG AT3s every 6 months or you are likely to get feathering of the tread.
Look forwards to watching next week's video. Regards Peter.
Happy wife, happy life! Landy looks lovely
and one unhappy husband 😆
Your wife is ALLWAYS smiling ,you must have a large tools to keep her so happy .
You may find that the wheel bearings wear quicker with the spacers on as it puts more load on the bearings.
Regards
Peter
There is also risk of reduced fatigue life in swivel hubs increasing risk of catastrophic failure.
They look cool grate job
I love you guys! I’m addicted to binge watching past episodes. I wanted this episode a few weeks ago. I keep thinking about it and today I watched the entire episode again and took notes !! Looking forward future educational journeys with you both - I do miss Germany having been stationed in Landstul 2006+. I also purchased my verify first Land Rover the new to US LR2 SE, (Freelander replacement). I’ve had 2 D3’s and 3 D’4s, RRS, Defender. As long as you keep making videos I’ll keep watching and learning. Take care!
😃👍 We just drove by Landstuhl last weekend. Our blacksmith son, Robin, just moved near Pirmasens. We love that area. We hope to add a Defender also to our list of Land Rovers. 🙋♀️ Vera
You guys really do great work and show what most youtubers won't show, you trully show how to solve certain issues that most youtubers won't show, all thye do is talking and no actions
What a nice couple. Greetings from 🇬🇧
Unsubscribe? Who would ever consider unsubscribing from this channel?! It’s way too edutaining, with or without a LR to care for. 👌🙏😊
Excellent tyres choice and the looks are great so worth the (legal) modificaties.
I just had Brembo rotors and pads installed on my 13 LR4 yesterday!!!
Going with Brembo eliminates any worry about what quality brakes am I getting.
Back when I was a parts manager my card file had red flags on some brands and suppliers who had sold us rotors that warped or came with bad heat treatment :(
This is the first video from this channel that I have watched and I found it charming, funny, interesting and a pleasure to watch. From a Brit in France, Dave.
Subscribed.
Hello Christian and Vera
I can only agree with your choice of tyre it’s the only thing I will put on my D3. I can find no disadvantages with them. I am glad we have an MOT and not the dreaded TUV!
Please keep the humour!-my favourite comment of Veras was “I listened to everything you said but i wasn’t concentrating “
That still makes me laugh!
Keep up the good work
Beautiful countryside
I thought the French rules & regs were bad but your German rules & regs take the biscuit. Great vid & I'm liking all the new shiny tools Christian is collecting. thanks guys. 👍
Nice to see a little precision on UA-cam.😀
As a person in U.K. I’m amazed by all the various regulations you have to adhere to ! The road accident rate of U.K. is less than Germany too.
Now I understand why my parents left Germany! Thank you for the video.
looks good with the spacers wears the bearings a little quicker but worth it for the look
👍😃 That is exactly what we think. 🙋♀️ Vera
Great vid guys . In Australia we call them multi grips
General grabber at3 are great tyres. I have them on my d3, also good offroad...... enjoy
I have just fitted Goodyear Wrangler HP all weather tyres to my recently purchased D4. I like them, good on mainly tarmac but plenty of grip in all conditions too. Personally would not fit the spacers. Noticed you have joined the LR Facebook group so we are in good company. Great Videos look forward to the next, thank you.
Christian. You remind me of Jurgen Klopp. You'll never walk alone!
Very interesting how TUV approach to tuning... we have nothing similar in Italy :-(( Now the Disco looks better with a wider track!!! Good Job guys
Thank you. 👍😃 🙋♀️ Vera
Wheel Spacers and Suspension spacers are a big No No here in AU
Would rather different wheel offsets to bring the wheels in or out, plus correct springs/struts
nice wheels. Like you LR stories
Your wife wears a smile every time I watch your video. Lucky man.
When the title mentioned Brembo I thought that you were upgrading to RRS supercharged Brembo 4 pot calipers and bigger disc's!
Got them on my D3 V8 and well worth it for the extra braking performance 👍
I put a set of Toyo Open Country AT3 tires on my LR3 (Canada). So far seem to be quite good, just had a bit of a trip out on some gravel roads/trails and they worked perfectly. Stayed with the stock size so didn't need to use spacers or anything like that. Time will tell how good they actually are.
With your dedication to excellence I think you meant "track" when you said wheelbase. Watching from Canada.
Great video!
We run 275/65r18 on our LR3, on the stock wheels. Offroad it is better to have a slightly narrower wheel, as it keeps the beads tucked in.
We have the OME coil conversion, with the HD springs and 2" lift. 235,000 km on the original wheel bearings, and it gets used offroad in Northern Canada. I've been lucky I guess. I love the stance with the spacers, but I have seen far too many failures to ever consider running spacers.
It's still crazy to me all the regulations and inspections you have to go through. We do whatever we want in regards to modifications. If your vehicle looks obviously unsafe, the police can force an inspection, but it is pretty rare.
Such a funny couple , love the videos , I am thinking of buying a Disco3 in the next 6 months , thanks for great videos
Have fun!
I keep.checking the classified ads and have been real good at finding LR4's that were sold yesterday 😞
Cool stunt!
Great video Christian and vera. Vera made a good choice. Just be careful with the wheel spacers ; there has been cases of people losing wheels. I've got 30mm spacers on my defender but made sure the spacers had lock tight on the threads when fitting them. Keep an eye on your wheel bearings as apparently spacers put more stress on them.
Enjoy !
Yes the wheel spacers do put the bearings under a heavier load. You can expect to have to replace them on a earlier interval than normal. Christian, I hope sincerely that the bearings are replaceable and that you don't have to replace the whole hub assembly. Although sometimes it's a blessing to replace the hub, as getting the bearings out can sometimes be a nightmare if you do not have access to a hydraulic press. Using the time honoured spacer and threaded rod can be a pain in the arse!
@chris lant @SAMRODIAN We have replaced already too many wheelbearings on this car without having wheel spacers on😢 . We'll see, what happens. We love the look, and that the main reason why we put them on. If they don'T work out, well take them off. At least we can make then another video about it. 👍🙋♀️ Vera
I always use lock tight on the nuts holding spacers on. I had a wheel on my D2 come lose once!
Watch "Grizzly n Bear " suffer swivel failure, look at "Defender Mods and Travels" superb analysis of axle failures and I think you will decide to remove the spacers.....before this I'd also had only a vague view on reduced bearing life. It then seems obvious that countries like Australia prohibits spacers for very good reasons !
I got a D3 with coils on 2" spring lift and 1" body lift running the 1" wheel spacers with land rover 17" wheels and 265/70/17 tyres in UK. It drives perfect, no issues at all.
Nice 👍🏻 video and Vera got her well deserved Italian ice cream 🍦 lol x
Wow, great video! I bought the same tyres 2 weeks ago after some analyse and I am really proud about the decision. Now after seeing your video I am even prouder ;) but now I wish also to buy a set of wheel spacers:)) keep up the good work and thanks for the video, a have a great car!
Wheel spacers are great on the Autobahn but they do wear out the bearings much quicker. Christian
Another great video. The wider wheel track from the spacers gives your Discovery an aggressive stance, I like it. You did not mention whether or not you performed a wheel alignment after fitting the new tires to ensure even wear. Again, the jovial banter between you makes watching your videos interesting and very enjoyable. Cheers👍
Magnificent job, The new tires look awesome, i’m just wondering how many kilometers they last. My BF Goodrich AT KO2’s (255/55R18 H109) lasted nearly 100.000 kms. Seeing this, i want those spacers, they make the car look even better.
Loved to see you working together in jalous making endless harmony. You’ve deserved that ice cream. Looking forward to the next video.
I have considered adding spacers and couldn’t decide, I think now having watched this video I may Fit some. I think in the UK the law is not quite so strict but must not stick out beyond the wheel arch. Excellent thank you.
I love them, they make such a difference, especially for a heavy built car like mine. 👍🙋♀️Vera
Good vid
5:55 I crack the bleed nipple on the calliper instead, then you're not pushing fluid back up and makes it easier to push in..
Also, yesterday, I just stuck 18" BMW X5 wheels on my D4 with 265/60/18 Achilles Dessert Hawk Mts on, and they fit perfectly (after getting the centre bore skimmed ever so slightly and different lug nuts), and they look almost factory LR.
I bought some 18" LR wheels and tried them on, which didn't fit, so I sold them again. Then later, I heard about using them with a spacer, so never got to find this out, always wondered! Thanks!
Why would anybody unsubscribe the channel is great. 😎
Your car inspection protocol reminded me of the old joke:
Heaven:
The police are British
The cooks are French
The engineers are German
The administrators are Swiss
The lovers are Italian
Hell:
The police are German
The cooks are British
The engineers are Italian
The administrators are French
The lovers are Swiss
😂😂😂
Love the videos, you guys make me smile 😊
It would be interesting to see the changes in overall geometry.
I have Knipex, I love them, use them at work a lot. I have 275/65-R18 tires on my Discovery 3 😁
Like Malcolm Hay stated earlier - your videos just make me smile and laugh. Germany has some very serious rules on vehicle modifications when compared to the USA. I have a Jeep JK with wheel spacers, 8.5" wide wheels and I took the stock fenders off of the Jeep,
Yes we are very jealous of you guys. 😃👍 🙋♀️ Vera
Always a leaning experience about L/R in Germany.
7°C und Vera trägt shorts... nice!
Female vs male diagnostics, I’d go with the female diagnostic “I don’t feel anything” sometimes simple things are best. But on highly technical aspect Christian’s diagnosis is superb! 🤗🤗
😅👍🙋♀️ Vera
Danke
Smiley faces all round! I would have stuck with the 19" option, they're awesome, and no spacers. You were very economical with the copper slip - between wheel and disc interface - corrosion city in salty weather and between the disc and hub. Also, from the previous video the floating brake pins, but, considering it's age the car is in remarkable condition. Given the nutters on the autobahns I'm glad the TUV do a good job of inspecting any upgrades - in the UK there's loads of "kids" running around with lowered and widened suspensions with no thought for geometry (you should realign the wheels as well) and clearances. Fortunately, they don't last long here, they usually crash, but we are very tolerant of these modifications for some reason, including the insurance companies.... Great, fun video.
19" are not an option for us on this Discovery 2, remember the TÜV. 😃👍🙋♀️Vera
Gerar vídeos. You both make these videos e pleasure to watch. I had the courage to by a Disco 4 after a watched a couple of your “classes”.
Sea you next Sunday.
😄👍🙋♀️Vera
Hello Fernando, you are a brave man 👍. Hope your LR4 runs forever without (major) trouble. 👍 Thanks for watching our videos. Christian
Greetings Christian and Vera, on my Cayenne I put Goodyear ATA, I was considering the AT3's. My 18" wheels are 255/55/18
Great video
EDIT: I also have Brembo brakes too, once owned Mercedes C class and a Grand Cherokee - I see a pattern here...
Looks good! I was banging my head against the wall for much of the video. I thought we had some onerous rules and regulations here (even in the "Live Free or Die" state!), but Germany may just take the cake on that one! See you next Sunday! 🤠
I think only Japan has more rules than Germany but theirs are not as stupid. Wait for the chapter “lights” and not to mention “engine tuning” or “suspension”. There is actually no welding allowed on the frame 😂. Christian
@@Vera_and_Christian Here in the state of New Hampshire, we have some very strict (relatively for the US) vehicle "safety" inspections, which until recently, I thought were the strictest in the nation. I learned, however, that Vermont actually has a more strict inspection and they also don't allow welding of vehicle frames! At least we can weld our frames here in NH 🤠
Mag eure Videos sehr, so ist der TÜV halt... Ist beim Motorrad nicht viel anders...
One thing about owning a car in North America vs. Europe is that in NA, there is no "Technical Passport" for the vehicle and nobody cares what you put on your car (larger wheels, different lights, engine mods, brake mods, etc.). Makes things much simpler...
Brakes upgrade you guys did looks great, I am thinking about Brembos next time my discs/pads wear out.
I bought Pirelli Scorpion Zero 255 55 19 previously had Bridgestone that where still UK legal after over 30 thousand miles but had uneven wear on rear.
Tire quality is important. I've been telling this to people for years, because it's easy to forget. Even if the rest of the vehicle is junk, like mine, it needs good tires, because that's the only thing that comes into contact with the road.
Vera "We got the Brembo ones not the cheap Chinese ones " 😂 made me chuckle
probably she said "not-the-cheap Chinese ones" =)
Love your videos, they keep me inspired to fix my LR3. What work did you do to the fenders to meet the TUV requirements? Also fun fact about your Channel Lock pliers, the universal name for them is slip joint pliers. Technically Channel Lock is a brand name but were probably the first to make that type of plier popular which is why everyone calls them channel lock.
We have not done any work to the fenders yet. We would like to talk to TÜV guy first, but haven't had the time yet. 🙋♀️ Vera
I have 40-year-old craftsman power bar in professional use
I just put on Cooper AT 420 EACH dollars, they run quiet,
here we call those pliers, multigrips or water pump pliers
here no tuv, only when you sell a car, this means it can be 40 years no inspection
nice vid thanks
Thank you Guys, Very Lovely video, it's very informative, we need some video about how to install 4x4 info dashboard and units needed and so on??, and if we can replace this with something more modern and new for offroad rides especially for LR3 and LR4 ??
Thank you. We would like that too, but it's too expensive. We can only do the cheap chinese version unfortunately. 🙋♀️ Vera