Dodge Charger Challenger Ram HEMI complete head gasket replacement instructional
Вставка
- Опубліковано 15 чер 2022
- Step-by-step instructional video shows you how to change the head gasket’s on Dodge/Chrysler HEMI 5.7 L engine without using expensive tools or paying thousands of dollars at shop.
FOLLOW THIS VIDEO COMPLETELY.
Dodge
Charger Hemi
Challenger Hemi
Durango Hemi
Magnum Hemi
Ram pickup Hemi
Chrysler
300 Hemi
Aspen Hemi
Text HELP. 209-305-1672
Serving
San Francisco Bay Area,
San Jose,
Sacramento, Stockton,
modesto,
Merced,
Fresno.
Bakersfield
Text or call 209-305-1672 - Авто та транспорт
Thank. I'm working on it so security budget and it really helped because I'm trying to redo 06 Daytona Charger RT my daughter's graduation present thank you I needed this video❤
Bro I love you thank you for this video. Doing gods work here.
Yes I love this video only thing is I wanted to see the headgasket takeout but over all great video man you did your thing my guy
Great Job . I,m a retired Diesel Tech and have taught many a college best way to do any particular job I know well that was an excellent get to its cake but do it right video. Thanks for sharing your Skills,and knowledge . Done a couple how to Videos myself .but obviously not a new Hemi Head gasket. that how I found you. 🕵♀
Man I’m 19 and looking into going to diesel tech I would really like to know about your experiences please and thank you
Outstanding video I wish they were all like that. Thanks.
In the process of doin this rn and this video is very helpful
EXCELLENT video sir!!!
This help me a lot thanks bro
Great video. Very thorough. Thinking of buying a 2005 clean 1500 fully loaded with 149k and bad head gaskets. Still debating but the head gaskets seem easier than my old Mopar 440 engine's.
Good tutorial 👌 👍
You should have talked about pulling the coolant plug on the water pump so when you feel it with coolant you wait till the coolant starts coming out of that port on the water pump. It's just a 3/8 inch drive plug and that's the back side of the thermostat. It could save somebody an engine as it will keep the air pockets out. 😅
It was a really good video by the way.
Great thank you
All this work I mine as well put my own supercharge too😂😅I thought I would be to much for me, but changing my gasket, I mine as well take the next step 😂😂
outstanding video and straight to the point no bullshit
Thank you for the video just one question what's the torque for the intake manifold
I need mine done..I live in plain well michigan.2011 dodge charger 5.7
What do you use to clean the old head gasket off the top of block?
Anyone have a rebuild kit or parts list for the cylinder heads? I am having some completely redone for my 2016 Rebel 5.7
Do you have the part numbers from mopar for the gaskets?
Don't measure push rods for specific length? And possibly replacing lifters thar ride on the cam with roller high quality ones?
Will tear dow. Work on my 99 chevy k2500?
Did you resurface the engine block too?
What's that big piece of foam do under the intake?
🔥🔥🔥🔥
What was wrong with the Resorvoir?
How many miles on this unit?
How did the screw up so bad with these head gaskets?
Currently doing this exact job on my 2015 5.7. Shouldn’t this be possible without draining the coolant? I’ve already replaced the radiator, ac condenser, coolant hoses, and water thermostat.
Uh no cuz coolant runs through the ports to cool the engine. If you do t drain you’ll make a giant mess and contaminate everything under the hood!
My head blots on my 2015 dodge charger5.7 is 10mm and 15 mm
I have a question I just rebuilt my engine on my 07 charger RT 2 days ago and today I noticed that my coolant kept going down I put another gallon and same thing won’t fill up. But I checked the dip stick and it was creamy the coolant and the oil mixed. But how can that be the head gasket is brand new. I’m not over heating and their is no white smoke coming out of the exhaust what do you think it could be.
Sounds like a blown head gasket.
@@erichedberg2907 no I figured it out the machine shop that replaced my driver side head gave me a passenger side head instead they told me they were interchangeable, nope 👎 the the coolant passage was going straight into the oil passage in the head. They replaced it with correct head this time and my car is back to running like a champ👍👍
@@rafaelfuentes7572 I've ran into that a couple times.
@@rafaelfuentes7572 wow, that's a big snafu for them not to know the difference. Why did they think they sell a left and right head gasket if they're both the same ?🤦♂️
You probably did not have the heads resurfaced did you?
Im working on my 09 Ram 2500 5.7 Hemi. I have heard conflicting comments on oiling the head bolts. Some say the bolts on these don't sit in any oil lines or coolant jackets, so oiling them and running them down into an inclosed sleeve will throw the torque readings off. What is your thought?
Torque reading isn’t off, it’s the fact that it’s now a lubricated bolt in a high vibration position. A little oil won’t hurt HOWEVER if you slather the bolt in oil more than a chicken breast in a fryer at popeyes your gonna have issues.
Is a 90 degree turn the same as a quarter turn?
Yes a full turn 360° half 180° Quarter 90°
Does it hurt if you don’t have it machined/resurfaced at a shop or is that a necessary thing to do? 5:46
It can, your head gasket blew for a reason. You don’t just replace the gasket otherwise it has a high chance of blowing again. You machine the surfaces to remove any potential imperfections or gaps so the head gasket is flush and makes a completely even seal. You also can have the machinist inspect the head and make sure there’s not any major cracks throughout. If there is a deep crack you will have to replace the head due to the fact too much material will be taken away and the head becomes useless.
What size are the down pipe bolts ?
16mm
💯💯💯💯💯💯💯💯💯💯‼️‼️
what if the customer dont want to resurface it
Dats a lot of stuff to take off and to remember to put them back on sheesh
This isn't a job for folks with memory issues. You could label everything but in most cases using intuition and memory works just as well.
@@DL101ca facts
Lable it all. Get some zip lock bags
@@kylegrant9980 facts
Head bolts should be replaced.
How much would you charge for that job?
1800
Hallo
Didnt show the 1 thing nobody shows. Manifold bolts removal. cant get them off.
What is the average price for the repair
I was told 2k
Love this tutorial video definitely subscribe to channel 12:20 12
Lol did he just skip the most important part??? Proper gasket orientation?
What would you charge the customer for this?
1000%