Awesome!!! Thank you so much for uploading this. Worked like a charm. I do have the keys, so when I connected the battery I just turned the key in the door to stop the lights from flashing. I then removed the fuse, module just like you did and I'm done. No more alarm going off in the middle of the night.
Yep this did the trick on my 91 Cherokee. The fuse i had to pull out was the number 3 fuse Clock/security alarm. The wires was tan/pink and green/orange the number 4 slot on the security alarm cap thing and straight across from it. Just fyi the 91 Cherokee's fuse box is located under the dash driver side. I also ran my ground wire from my battery terminal.
You are the man; I've been having the alarm problem for 20+ years; dealer couldn't fix it; alarm places couldn't either; electric shops etc, no body could disable the darn alarm; you have helped me solve a life long problem on my to do list; now i will go for restoring the jeep as I always wanted to, but did not go for it as the vehicle was unreliable leaving me stranded everywhere; burned tons of money over the years to either fix it or disable it; even replaced computer straight from dealership; thanks a million!
I just did this. Holding the module the same way he holds it in the vid, i see these wires in the connector (starting from the left): | 1 black | 2 brown/tan | 3 empty space |*4 tan/pink* | 5 black/red| ... again holding the module as in the vid, on the back side of the connector, starting from the left, the wires are: | 1 white/gray | 2 purple | 3 white/black | *4 purple/yellow* | 5 pink/orange | ... As in the video, I grounded the 4th wire from the left (tan/pink) an heard a relay click, but the lights were still blinking. I then grounded the wire directly behind it (purple/yellow) heard a relay click, and the alarm was off. Disconnected the module, plugged the 15 am fuse back in, and shut of the engine.disconnected the +battery lead for a few seconds, connected it back up, NO ALARM! Yea! Hope this helps. EKMF, thanks for posting the video! I've been trying to fix this for a long time.
THIS guy right here is a life saver. Yeah the video gives you an idea of what to do but when he says "you touch right here and right here" I was thinking....what the fuck is right here and here?!? What wires are you touching idiot!?!? Luckily I came to the comment section and this guy explained it in detail and exactly which wires to touch. Thank you Mr Jex Ter!!!
Once again, as Wolf Moessner said, which 2 wires did you ground? I know one is the purple w/pink tracer, but which one was the second? I can't find an alarm wiring diagram for a 95 Jeep to gain that information and I can't remember where I found the information before.
What would the vehicle do before you bypassed the alarm? Would it crank and start for a second or two, then shut off? I am trying to troubleshoot my 1993 Jeep Grand Cherokee...
On my jeep, it was a tan/pink wire and then the one directly behind it which is a purple wire with a yellow tracer(mostly purple wire with yellow line running on the sides).
Bypassed it like two years ago and removed the security terminal. Just now it's stuck again. And when I try to start I hear a click in the glove box. Same issue or something else?
my dad has a 94 grand Cherokee Laredo&we keep rewinding ur video cuz we cnt 2 seem 2 c what wires ur grounding? please HELP if u could..We been at it 4 at least 5days..ugh
My jeep zj 5,2 v8 1996 is diferent When I dismantled the panel and accessed it, I could not find the alarm module. Does anyone know where I can find it? I uninstalled the airbag and I couldn't find the module. As information, it also doesn't have fuse 21. There are only some that say 10,15.20, it's sad. 
Hi, at the moment I want to have a Cherokee who has a problem with the mobilizer, but the video does not see which cable you are missing. Could you write me, thank you in advance! Greetings: Vasil Ivanov
Jex Ter 2 years ago I just did this. Holding the module the same way he holds it in the vid, i see these wires in the connector (starting from the left): | 1 black | 2 brown/tan | 3 empty space |*4 tan/pink* | 5 black/red| ... again holding the module as in the vid, on the back side of the connector, starting from the left, the wires are: | 1 white/gray | 2 purple | 3 white/black | 4 purple/yellow | 5 pink/orange | ... As in the video, I grounded the 4th wire from the left (tan/pink) an heard a relay click, but the lights were still blinking. I then grounded the wire directly behind it (purple/yellow) heard a relay click, and the alarm was off. Disconnected the module, plugged the 15 am fuse back in, and shut of the engine.disconnected the +battery lead for a few seconds, connected it back up, NO ALARM! Yea! Hope this helps. EKMF, thanks for posting the video! I've been trying to fix this for a long time.
Just start the vehicle and unplug the wire don't need to touch those wire or pull a fuse..... permanent fix is just unplug the alarm while engine running.
What exactly did you use for the wire to ground out the system? I know you said multimeter but all I saw was a black wire with the point on it. Can you just use a wire and put it in the lighter and the other end to the other spot?
Hey so question. Mine is a 94 but I don’t have those colour wires. Which pins are you grounded? My problem is that the car won’t start. Just the security light is on and sometimes fuse blows four the TCM and air-conditioning (which I don’t even have anymore)
I have a 94 grand cherokee laredo.i just got it two days ago.i couldn't figure it out.i dont have the same panel this video has.i dismantled my dash.its a mess.i hope i can get some advice.i am so upset i want to sell it
Hey man a have a newer model mine doesn't have that module and the fuse box is in the lower right side do you have any ideas how to bypass the security on this
Been having issues with my 94 jeep grand cherokee. Tried your fix everything was going as you said I started it up but before I got the security module unless plugged the system re-engaged, the ticking was back and the horn started honking. Can you please help
Hi I have an 02 Jeep Grand Cherokee. I'm having the same issue with the anti-theft system locking the car and I only have one key cuz I know there are videos that they use to keys, any more tips on how because it's becoming a real inconvenience.
On my jeep its not working someone cut the purple and yellow wire and grounded it already the security box is plugged in I can't get it to reset this way because everything of the lites an alarm have Ben took out for my mud toy I have ather lites run off the battery its always done fine till I took all the wires out of the roof
Can this trick work on a 1997 Grand Cherokee V-8 ? The alarm is always going off by itself and I don't know how many times I had to recharge the dam battery .
gracias por la informacion . a mi si me funciono y para poder encenderla quite la alarma de la chapa de la puerta del conductor girando 2 veces hacia la derecha y luego 2 veces a la izquierda despues inicie marcha y ya prendida desconectew el modulo de seguridad de la alarma .
U only do it once its a permanent fix just have the engine running and unplug the alarm....I don't recommend u touch the wire ....u can pull the fuse if u like ....I have a video my self I did on a 95 zj
it started drove around a bit and then took the security off and now it won't even start again fuck this dumb ass headache of a trash jeep. selling it. didn't realize i was driving a tesla
My friends jeep this year and model, she has to put the key in the passenger side and turn it twice, and that is how they disable the alarm. I found the hard way, I opened the door and was looking for the black thing that usually has a button on it to turn off the alarm.
FINALLY! That worked perfectly... this Jeep has been sitting for ten years because of this security system fault. THANK YOU!
Awesome!!! Thank you so much for uploading this. Worked like a charm. I do have the keys, so when I connected the battery I just turned the key in the door to stop the lights from flashing. I then removed the fuse, module just like you did and I'm done. No more alarm going off in the middle of the night.
0saE
Yep this did the trick on my 91 Cherokee. The fuse i had to pull out was the number 3 fuse Clock/security alarm. The wires was tan/pink and green/orange the number 4 slot on the security alarm cap thing and straight across from it. Just fyi the 91 Cherokee's fuse box is located under the dash driver side. I also ran my ground wire from my battery terminal.
Thank you for this. It worked awesome. Bought a jeep with this problem. And now it works great. Bought it to put part into my grand wagoneer.
You are the man; I've been having the alarm problem for 20+ years; dealer couldn't fix it; alarm places couldn't either; electric shops etc, no body could disable the darn alarm; you have helped me solve a life long problem on my to do list; now i will go for restoring the jeep as I always wanted to, but did not go for it as the vehicle was unreliable leaving me stranded everywhere; burned tons of money over the years to either fix it or disable it; even replaced computer straight from dealership; thanks a million!
Now that's a bypass. Nice work.
I just did this. Holding the module the same way he holds it in the vid, i see these wires in the connector (starting from the left):
| 1 black | 2 brown/tan | 3 empty space |*4 tan/pink* | 5 black/red| ...
again holding the module as in the vid, on the back side of the connector, starting from the left, the wires are:
| 1 white/gray | 2 purple | 3 white/black | *4 purple/yellow* | 5 pink/orange | ...
As in the video, I grounded the 4th wire from the left (tan/pink) an heard a relay click, but the lights were still blinking. I then grounded the wire directly behind it (purple/yellow) heard a relay click, and the alarm was off.
Disconnected the module, plugged the 15 am fuse back in, and shut of the engine.disconnected the +battery lead for a few seconds, connected it back up, NO ALARM! Yea!
Hope this helps. EKMF, thanks for posting the video! I've been trying to fix this for a long time.
thanks,
Thanks my friend,very nice!!!
THIS guy right here is a life saver. Yeah the video gives you an idea of what to do but when he says "you touch right here and right here" I was thinking....what the fuck is right here and here?!? What wires are you touching idiot!?!? Luckily I came to the comment section and this guy explained it in detail and exactly which wires to touch. Thank you Mr Jex Ter!!!
I dont understand what u yalking about cigar and what wire
Does this work
Really appreciate this! I did this yesterday and it worked perfectly.
Your a mad genius! Thank you so much! Thats the only issue I have with these jeeps but not now! 😆
COOL! Finally found the wire colors in description box... Hope this works!
The jeep is still running over a year now. Hope this helped some people out.
You are the man. I grounded pink and orange . Also purple and yellow and that did the trick this were on the gray side..
Worked perfectly on a 93 as well. Thank you for posting.
Glad I could help out. It took me days or trial and error, different combinations before I finally figured out the fuse was the key.
Description says #29 fuse but you can see in the video it is indeed #21 fuse ;)
Mr. Awakedust: 😝...
Im glad you learn something from this video and I hope you are thankfull for it 😝...
Thanks a lot bro. Your video helped alot. My jeep runs so much better.
Another jeep moves again, thanks for the video. Anybody need a slightly used(only thrown at a wall once)security box?
hahaha that's funny i have a 93 jeep.
Thanks bro. I figured put wich pin this video helped 100%
the wires are brown/pink and purple/yellow.
Whoever you are, I owe you a fucking beer of two. You just saved me a hell of a lot of cussing.
Very very helpful works mint
Once again, as Wolf Moessner said, which 2 wires did you ground? I know one is the purple w/pink tracer, but which one was the second? I can't find an alarm wiring diagram for a 95 Jeep to gain that information and I can't remember where I found the information before.
I have a 1996 Jeep Cherokee Larado V8 quad track how do I remove the alarm module permanently. Is it the same as this?
Purple/white wire
&
Brown/yellow wire
Just ground the disarm wire behind the kick panel (purple with yellow) on the driver's side. I did mine in about five minutes.
Did you just ground it to car or something permanently?
michael dalvit yes. You permanently ground it.
Could someone please help me with my 1993 zj jeep grand Cherokee. security alarm system can't get it to run my security won't let it please help
What would the vehicle do before you bypassed the alarm? Would it crank and start for a second or two, then shut off? I am trying to troubleshoot my 1993 Jeep Grand Cherokee...
Me too. after spending way too much for false diagnosis at dealership
And which exact wires do I poke ??? Considering your hand is blocking everything
On my jeep, it was a tan/pink wire and then the one directly behind it which is a purple wire with a yellow tracer(mostly purple wire with yellow line running on the sides).
What wired did u touch
Can i just disconnect security module while running without grounding or pulling fuse
Long as it's running yes you can unplug it
you save me thanks a lot very useful
Sacko Abdoulaye what terminal did he press one or two I can't find which one he did please help
What two wires did u ground out the camera guy looked away....
Austin Carey
The purple and brown I believe, sorry it's been so long since I did this.
Which relays did u ground on the security module im having this problem right now on the side of the street and i nee help asap
Tan/pink wire and the wire directly behind it which should be a Purple with a yellow tracer.
If you guys did the method and still can't start remove the idle air control valve if your vehicle start, u need to replace the parts.
Fuse #29 or #21 i thought the cigarette lighter would put out unwanted power.. Interesting
Bypassed it like two years ago and removed the security terminal. Just now it's stuck again. And when I try to start I hear a click in the glove box. Same issue or something else?
All nice ,but which wire( s ) did You touch ...............................waiting..( Couldn't see doodly squat ,your hand is in the way. lol
Answered in the description...
What 2 relay points did you touch with the multimeter on the security terminal the video did not show it clearly
which wires did you ground? dont have the brown/ yellow wire...
What if my ship is not running can I still get this procedure?
Dude... Thats great! But I cant see which wires U touched to disable!!!
my dad has a 94 grand Cherokee Laredo&we keep rewinding ur video cuz we cnt 2 seem 2 c what wires ur grounding? please HELP if u could..We been at it 4 at least 5days..ugh
After you grounded the wires, have you had any issues with the security system since disabling it. My jeep has the same security system problems
I don know where you pres ( ground ) one cable ??? In the red plug
where did u press on the terminal for it not work? cant seem to get mine to turn off
My jeep zj 5,2 v8 1996 is diferent When I dismantled the panel and accessed it, I could not find the alarm module. Does anyone know where I can find it?
I uninstalled the airbag and I couldn't find the module. As information, it also doesn't have fuse 21. There are only some that say 10,15.20, it's sad.

where did you press the meter what whole was it
Hi, at the moment I want to have a Cherokee who has a problem with the mobilizer, but the video does not see which cable you are missing. Could you write me, thank you in advance!
Greetings: Vasil Ivanov
Jex Ter
2 years ago
I just did this. Holding the module the same way he holds it in the vid, i see these wires in the connector (starting from the left):
| 1 black | 2 brown/tan | 3 empty space |*4 tan/pink* | 5 black/red| ...
again holding the module as in the vid, on the back side of the connector, starting from the left, the wires are:
| 1 white/gray | 2 purple | 3 white/black | 4 purple/yellow | 5 pink/orange | ...
As in the video, I grounded the 4th wire from the left (tan/pink) an heard a relay click, but the lights were still blinking. I then grounded the wire directly behind it (purple/yellow) heard a relay click, and the alarm was off.
Disconnected the module, plugged the 15 am fuse back in, and shut of the engine.disconnected the +battery lead for a few seconds, connected it back up, NO ALARM! Yea!
Hope this helps. EKMF, thanks for posting the video! I've been trying to fix this for a long time.
Just start the vehicle and unplug the wire don't need to touch those wire or pull a fuse..... permanent fix is just unplug the alarm while engine running.
@@Platinumtag The whole point is if the immobilizer is active your vehicle will not start like mine
@@davidsortore8636 I know, one of the door usually deactivate it by just turning the key back and for in one of them.....
What happens if you do not pull the fuse?
Can you show what wire? A close up?
I believe it was the purple and white and the a brown and yellow. Sorry the camera guy screwed that up.
Alguien que me pueda decir oor favor que cable fue el que pincho no se alcanzó a distinguir bien gracias
What exactly did you use for the wire to ground out the system? I know you said multimeter but all I saw was a black wire with the point on it. Can you just use a wire and put it in the lighter and the other end to the other spot?
Hey so question. Mine is a 94 but I don’t have those colour wires. Which pins are you grounded? My problem is that the car won’t start. Just the security light is on and sometimes fuse blows four the TCM and air-conditioning (which I don’t even have anymore)
I have a 94 grand cherokee laredo.i just got it two days ago.i couldn't figure it out.i dont have the same panel this video has.i dismantled my dash.its a mess.i hope i can get some advice.i am so upset i want to sell it
Hey man a have a newer model mine doesn't have that module and the fuse box is in the lower right side do you have any ideas how to bypass the security on this
Will it restart if you disconnect and reconnect the battery and have to do it all over again
Been having issues with my 94 jeep grand cherokee. Tried your fix everything was going as you said I started it up but before I got the security module unless plugged the system re-engaged, the ticking was back and the horn started honking. Can you please help
If you have any updates on this problem getting fixed can you help me out I also have a 94 grand Cherokee with the same problem
Hi I have an 02 Jeep Grand Cherokee. I'm having the same issue with the anti-theft system locking the car and I only have one key cuz I know there are videos that they use to keys, any more tips on how because it's becoming a real inconvenience.
Which wire did he use the multimeter thing on?
On my jeep its not working someone cut the purple and yellow wire and grounded it already the security box is plugged in I can't get it to reset this way because everything of the lites an alarm have Ben took out for my mud toy I have ather lites run off the battery its always done fine till I took all the wires out of the roof
What wires did u ground ?
you ever figure out
Will this work on a 1993 5.2 liter Grand Cherokee?
Try unlocking the passenger door with the key...
Bruh I can't see what wire you are grounding what is color code?
Can this trick work on a 1997 Grand Cherokee V-8 ? The alarm is always going off by itself and I don't know how many times I had to recharge the dam battery .
Thats the fix, remove while engine running.... that's the permanent fix you could do it without pulling a fuse or touch the wires.
gracias por la informacion . a mi si me funciono y para poder encenderla quite la alarma de la chapa de la puerta del conductor girando 2 veces hacia la derecha y luego 2 veces a la izquierda despues inicie marcha y ya prendida desconectew el modulo de seguridad de la alarma .
Sabes si es necesario hacer lo de la tierra a los cables? De antemano gracias
What’s the tool you used to fix it
So what's the 15 amp fuse?
What about a regular Cherokee? I have a 92 . My fuse panel is not the same
Remove idle air control valve, it look air from engine ......and it won't start if it's stuck.
Why does my Jeep not have all that is it because it had a computer installed??
Anybody have any tips for the same issue on 97 grand Cherokee?
If u can't start unplug and remove idle air control valve completely ...then vehicle should start automatically from one touch at the ignition.
Does anyone know for sure what fuse number? The description says #29 but in the comments someone said #21?
I'm about to fuckaround and find out
Does this work 99 Jeep grnad
I tried everything.
What the heck am I missing.
My lights aren't flashing anymore, but it still dies like the immobilizer is still active.
I’m having same problem lights at t flashing but still no start
Jee Grand Cherokee 2004 Alarm Tun off
What's in your hand I don't see what you did
It's just a piece of wire grounded to the body.
in the video look like he press two of them wires
Do u have to do this eveytime
U only do it once its a permanent fix just have the engine running and unplug the alarm....I don't recommend u touch the wire ....u can pull the fuse if u like ....I have a video my self I did on a 95 zj
Is that the same as 96?
Grand Cherokee
Interested too
For zj 1996 5.2
It is work?
It very blurry
it started drove around a bit and then took the security off and now it won't even start again fuck this dumb ass headache of a trash jeep. selling it. didn't realize i was driving a tesla
What
Can’t see what wires were touched to disable… pointless video
Will they let my Jeep start without the chip key that's my problem
My friends jeep this year and model, she has to put the key in the passenger side and turn it twice, and that is how they disable the alarm. I found the hard way, I opened the door and was looking for the black thing that usually has a button on it to turn off the alarm.
what color wires was that that he touched?