I'm a DIYer and I've been following you, the Kilted Guy, and Vancouver Carpenter; and you three have really helped me as I currently do a level 5 finish on my walls
Hi, I'm a contractor. I do almost everything on our remodel projects including drywall. I'm forwarding your videos to my workers so they'll see how to finish joints perfectly!
I'm a carpenter by trade but for the last ten years I've been the head maintenance guy for a group of landlords. Everything you've shown is the same way as I would do it. Good to see some accurate information on UA-cam. I've got a few videos myself not very good at making videos but I'm learning. Good job
I have a 750 sq foot shop addition that I have 1 wall left to install the drywall on then on to tape and mud. Appreciate your videos as I have learned many good techniques from you. Thanks for sharing
Hey Paul. So I remember learning about the concave side but I totally forget. Can you do a video explaining that, just with the knives themselves not while doing a job?
Right on Chris!💥👊🏻 How ya doing buddy? Here’s a video about the concave side of a drywall knife: ua-cam.com/video/MKdlKgSjwJk/v-deo.html Thanks for watching and commenting bro.😎 -Paul
@@PaulPeck awesome man thanks bro! I have learned a ton from you. I'm good, just finished first coat of final paint on the studio and the HVAC unit should be here this week.
I’m a DIY type but not incredibly handy. Paul, can you do a video on cracked drywall from door corners that seem to recrack after repairs are done? Was it a bad technique that caused it or something else. We have used both kinds of tape. We did use, though, the joint compound already mixed in a jar from a big box store.
I've done drywall all life. Youre working it and I don't know if you were taking time to talk. You can coat the mud by grabbing the knife full of mud all the way across it and just wipe off tips on both ends of knife on pan and apply down middle in one shot, so you don't hav to keep making passes to fill it. you run that field joint in one big pass. One time coating it with mud. One time feather each side of mud just aplied, 2 passes down field joint. and then one wipe down center and done. Lots of mud to catch by not feather your mud on both sides of knife on pan before applying it. If any of that made sense. Good job good work. It would just be more efficient, same results.
Can you skim coat over painted walls, my bedrooms have a horrible texture and a noticeable line where two pieces of dry wall meet where you can tell a horrible texture job was done.
Yes you sure can Alicia!👍🏻 Check this video out: ua-cam.com/video/mZIbAiXO3o4/v-deo.html Let me know what you think. Thanks so much for watching and commenting!😎 -Paul
Dry wall on the exterior of a house in a climate with 80% humidity most of the year. That's about as cheap as it gets. It least use material that will hold up.
Was just curious. I see your UA-cam name says tapeless drywall finishing. Does that mean you don't use tape of any kind? I'm a painter so overlook me if that sounds dumb, just never saw that before.
@@c.b.-11 yes, no tape at all. We have been doing tapeless drywall finishing for more than 10 years and no issues so far. You can check my channel for more info. Thanks 🙏
Here's another Great video: How To Repair WATER DAMAGED DRYWALL CEILING- Step by Step ua-cam.com/video/6fCW69gXqfg/v-deo.html
I'm a DIYer and I've been following you, the Kilted Guy, and Vancouver Carpenter; and you three have really helped me as I currently do a level 5 finish on my walls
I watch all 3 Mentioned above. I do services (plumbing, electrical, paint, drywall, ac maintenance and new installs, and dabble with carpentry)
Paul you've helped me a bunch. Watching these videos is therapeutic, lol.
Hi, I'm a contractor. I do almost everything on our remodel projects including drywall. I'm forwarding your videos to my workers so they'll see how to finish joints perfectly!
I’ve done my share of this as a DIYer. Came good but MAN you make it look easy. Bravo
Diy guy here thanks for all the tips Paul. I am also in Florida.
I'm a carpenter by trade but for the last ten years I've been the head maintenance guy for a group of landlords. Everything you've shown is the same way as I would do it. Good to see some accurate information on UA-cam. I've got a few videos myself not very good at making videos but I'm learning. Good job
I have a 750 sq foot shop addition that I have 1 wall left to install the drywall on then on to tape and mud. Appreciate your videos as I have learned many good techniques from you. Thanks for sharing
I remember when you started this one. It's looking great!
👍🏻🍻🍺🐶
Scully!!!
Paul is the Boss! I can't believe how that texture just peeled off.... awwh man! Its looking gorgeous bro!
Hey Paul. So I remember learning about the concave side but I totally forget. Can you do a video explaining that, just with the knives themselves not while doing a job?
👍🏻🍻🍺😄
Right on Chris!💥👊🏻 How ya doing buddy? Here’s a video about the concave side of a drywall knife: ua-cam.com/video/MKdlKgSjwJk/v-deo.html Thanks for watching and commenting bro.😎 -Paul
@@PaulPeck awesome man thanks bro! I have learned a ton from you. I'm good, just finished first coat of final paint on the studio and the HVAC unit should be here this week.
This is looking awesome Paul 👌 looking forward to the outcome! I bet it will be amazing!
I really appreciate that Suzy!👍🏻 Thanks for stopping by my friend.😎 -Paul
Colorado diyer... Great tips, thanks Paul!
DIYfer here :)
Great info and walkthrough! Tyfs 😃
Hello - great video - what drywall taping brand would u recommend?
I’m a DIY type but not incredibly handy. Paul, can you do a video on cracked drywall from door corners that seem to recrack after repairs are done? Was it a bad technique that caused it or something else. We have used both kinds of tape. We did use, though, the joint compound already mixed in a jar from a big box store.
Thanks Paul 😎🛠️😎🛠️😎
Very good 👍👍💖
thats looking like knew compaired to how it started int he previous video , great work mate
very good professional work.
Stay connected and love support and respect is key
Looking good 👍
What type of mud are you using?
What brand dry wall knife should I consider for skim coating ceilings and walls as well as for speckling papered over joints?
DYI . Good info!👍
I've done drywall all life. Youre working it and I don't know if you were taking time to talk. You can coat the mud by grabbing the knife full of mud all the way across it and just wipe off tips on both ends of knife on pan and apply down middle in one shot, so you don't hav to keep making passes to fill it. you run that field joint in one big pass. One time coating it with mud. One time feather each side of mud just aplied, 2 passes down field joint. and then one wipe down center and done. Lots of mud to catch by not feather your mud on both sides of knife on pan before applying it. If any of that made sense. Good job good work. It would just be more efficient, same results.
You explain it perfectly I just paint for the most....
Pretty work, great tips:!
Hey! I’m a handyman and was curious what your charging for a 12x12 patch?
depending on where the patch is and what has to be done
Good video
Can you skim coat over painted walls, my bedrooms have a horrible texture and a noticeable line where two pieces of dry wall meet where you can tell a horrible texture job was done.
Yes you sure can Alicia!👍🏻 Check this video out: ua-cam.com/video/mZIbAiXO3o4/v-deo.html Let me know what you think. Thanks so much for watching and commenting!😎 -Paul
New sub from handyman
I notice you never take the sticker off the knife
A concave side! What?! I had no idea!
all broad knives have a bow in them
Dry wall on the exterior of a house in a climate with 80% humidity most of the year. That's about as cheap as it gets. It least use material that will hold up.
👍👍👍👍
Was just curious. I see your UA-cam name says tapeless drywall finishing. Does that mean you don't use tape of any kind? I'm a painter so overlook me if that sounds dumb, just never saw that before.
@@c.b.-11 yes, no tape at all. We have been doing tapeless drywall finishing for more than 10 years and no issues so far. You can check my channel for more info. Thanks 🙏
why skip trowel when you did the work to flatten what skip trowel is meant to hide? Such a silly thing to do.
I’ve never seen a Finished job…🤔
DIY
👍🏽
👍
Iam a drywall guy
👍🏻🍻🍺🐶
Diyer
Thanks so much for watching and commenting Carolyn!👍🏻😎 -Paul
Are you really putting joint compound, outside, next to a swimming pool? Wow weeeeee that's a shit idea
👍🙈