Anodizing Racing Aliexpress exhaust - 2018 mt07 fz07 - Quick install guide and comparison
Вставка
- Опубліковано 5 лют 2025
- Anodizing exhaust for 2014-2019 Yamaha Mt07
There are currently no videos anywhere that show to how install these, and they can be a pain in the ass!
Firstly, I WOULD recommend this exhaust for around $200 you really can't go wrong.
I got it from the anodizing official store on AliExpress and it shipped to Australia in 7 days from China, Which is crazy fast!
The only issues I have are that it comes with no instructions, nothing at all...
And it comes with a bunch of useless extra bolts making you second guess if it's on correctly.
If you follow my guide, it could be done in around 30-45 minutes.
Rating:
Sound: 9/10
Install: 7/10 (no manual, strange amount of extra parts)
Quailty: 8/10
Overall: if you're not prepared to spend $1200 on Akrappovic, I'd definitely give this a go as the sound without baffle is comparable. For $200 and fast shipping, I would recommend this exhaust without a doubt!
If you have any questions, leave a comment and I'll get back to you.
Cheers amigos!
Any problems bro with this headers? Sounds beautiful 🤩
I think the tapered piece you threw away allows the header to taper into the muffler and seal up any gaps. It slides on the header with the fat part, then the narrow part slides in the muffler, then springs hold in place with tension. No need for sealer that way.
Better to unplug the O2 sensor rather than twist up the wires. Note : on a MT 09 Tracer you need to remove the center stand to remove the stock exhaust
thanks man just got mine in today cant wiat to go home and install it
I wonna order the same exhaust for my xsr700, but is two things first is f... loud 😜, and second thing is that the pipes have different angle then orginal one, and that is problem if you have nice belly pan from SW-MOTECH, just not gonna fitted together.
Do you have a link?
Why the check engine is on bro ?
Is it easy to take off the baffl with the exhaust on the bike ??
Very easy, 1 bolt
Firstly thanks for putting this vid up. Have you run a power commander or anything to account for differences in this system from stock? I've ordered one myself and was a little curious.
Hey David. I haven't done any tune, I was planning on doing that when I do my next big service as I'll do a DNA airfilter at the same time. Runs perfectly fine without tune or power commander though so I'm in no rush, cheers!
Nathan Craig hey just curious now that you have ran it without a tune for quite some time. Have you had any issues or do you notice a difference on how it runs? I’m looking to to this to my motorcycle.
Thank you in advance
Does the package also receive the homologation of the exhaust? Thank you
I have ejk fuel commander can somebody said the setting for this exhaust ?
Very helpful bro, cheers 🤙
I have installed mine same headers with different slip on.
I am getting backfire when letting off the throttle.
Is this the reason you put sealant between the slip on and the pipes?
I am pretty sure no air is getting in or out.
May need a tune, just not sure.
Hey, I only put sealant because the springs are useless and don't hold it tight enough. Actually, last week I used a M6x120 bolt where the springs would normally hold it, that helped a lot. I never had backfire unless I really gave it hell.
Back firing on engine deceleration means the engine is running lean. A tune to run the engine richer would fix that.
Hi, I have read a few views of this exhaust which points out that the swingarm will discolour. I am wondering how bad that will be?
No issues from me
What a actuall name for black L shape??
How's the exhaust holding up after 1 year? Any rust or issues with welds? Has it gotten louder?
No issues so far.
Looking on the power commander website I don’t see a fuel map for this what should I use?
use the m4 with no baffle tune. thats what this exhaust is modeled after. You should have an auto tune feature if you have the newest power commander. If not maybe there is a way for me to send you my fuel and ignition table. my bike was dyno'd at 230ft above sea level thats roughly where my area sits at
Hey mate do you have a link to this exact one that you bought? And is it still all working fine?
All good still!
Let's shop together on AliExpress with new user coupons
Your AU $9.11 in coupons are here!
a.aliexpress.com/_qegOLr7r
305mm variant
Do you get pops and bangs like you would with a akrapovic
1st and 2nd pops, yes. But not every time 👍
can you link the product from aliexpress?
Let's shop together on AliExpress with new user coupons
Your AU $9.11 in coupons are here!
a.aliexpress.com/_qegOLr7r
305mm variant
@@Nathocraig33 do you know if i can install this to my 2020 model?
@@Nathocraig33 thanks bro
@@nikkojoson I don't know to be honest I'm sorry. I don't think they ever made any mechanical changes between 18 and 20 so I would assume yes it's fine.
Is it the 370mm, 305mm or 250mm version ?
305.
Let's shop together on AliExpress with new user coupons
Your AU $9.11 in coupons are here!
a.aliexpress.com/_qegOLr7r
How many Decibel with the new exhaust? If you are willing to do the test with your phone for me, just download an app and put your phone at 1 meter of the pipe and tell me the result please :3
Hey mate. Just how loud is it? Obnoxiously loud? Or just right loud. I don't mind stupid loud but I like to let my bike warm up in the mornings and I don't want the people in my building losing their shit over my bike...
Hi James, I wouldn't say it's obnoxious but I kind of like a loud pipe... If you like to warm up your bike, I would do it outside someone else's house 😂 here's a link of it running:
ua-cam.com/video/ZcV9CiuQcMM/v-deo.html
How did you pull out the reducer piece?
It was quite loose, can I suggest inserting a screw driver and hitting with rubber mallet to pop it out?
hey nice video! but i have a question... do you need to adjust the injectors or the onboard computer in order not to damage the engine?
my engine runs just fine without ecu tune. just use your stock sensor and have fun.
Does Your check engine lap keeps turned on with it
4 months with no issues
Consumption growing up after montage?
I don't understand what you mean, fuel consumption? If so, then no
Is this Exhaust legal in Germany?
no, but im german and im using it still XD no police has stopped me ever,even without db killer... but im not responsible if anything happens to you tho
Does it need tunning?
I haven't, and have had no issues
Thank you, i bought same exhaust from ebay, they didnt include the brass bracket.
@@bonasoy7928 I didn't go via ebay. Perhaps a different seller.
@@Nathocraig33 do you have any recommendation or dyi bracket.
@@bonasoy7928 www.aliexpress.com/item/Motoo-MT07-FZ07-motorcycle-Exhaust-Full-system-FOR-Yamaha-MT-07-FZ-07-Tracer-2014-2018/32851539116.html?spm=2114.search0104.3.17.3baf6ddbW6i1g2&ws_ab_test=searchweb0_0,searchweb201602_7_10065_10068_10130_10890_10547_319_10546_317_10548_10696_453_10084_454_10083_10618_10307_537_536_10131_10132_10133_10059_10884_10887_321_322_10103,searchweb201603_53,ppcSwitch_0&algo_expid=45329bc0-c296-4fd0-a040-9e3162bf2ac4-2&algo_pvid=45329bc0-c296-4fd0-a040-9e3162bf2ac4
msg these people, they should be able to ship you one separately
Seems very loud
Petty sure that piece you threw away is why it’s loose
That piece is so it fits into a pipe smaller than 51mm diameter, because the muffler itself is universal, but headers are not.
It's way too loud.
For who?
If you think it's cool then great! That's all it matters. But as a 50-year-old who has been riding on and offroad for 30 years, there's nothing cool about an obnoxious loud pipe. That's just my personal opinion. It means nothing. I'm happy you love it! By the way, I'm kinda fucking pissed off that I didn't see a single one of you guys riding a kangaroo when I was there.
@@LuckyNikitaBoba bore off mate
@@dannyrogers46 If that's an insult, it didn't work because I have no fucking idea what "bore off mate" means. I only understand American English.
@@LuckyNikitaBoba it means shut up your boring