Two things that really helped a lot. You mentioned the drill bit size and in the beginning you talked about the adjustable pin for the bottom of the handle. Thanks!
Lifesaver video! Thank you so much. My first time replacing deadbolt and handle. This helped so much. I appreciate you staying what size drill bit to use for the bottom hole. 👍
I just installed one of these. The scariest part was having to drill through the door. The curious thing is that it says you need a 3/8 (which really is 9.5 mm) or 10 mm drill bit. So I'm surprised a 5/16 (8 mm) worked. For me, the 3/8th was slightly larger than needed. That part only goes 1/2 way through the door. So I used a 1/4 inch drill bit to go through the inner side metal layer for the bolt. I was sweating it. I wish I had found your video first..you made it such a non issue. Bound to give the confidence required :)
Thanks for the kind words! Nothing is wrong with being nervous. In a lot of the videos I make, I'm nervous, mainly if I have never performed or installed the product before. Fortunately, I install plenty of door knobs and handles. I'm glad everything worked out for you!
This video was a lifesaver for me, especially since I installed in this in December in Minnesota (brrrr). I also had to drill a larger hole, so the 5/16" tip was helpful. The instructions that came with it were not helpful at all. Glad I found your video!
So much better looking! I ordered the Greenwich matte black entry door handleset with the Broadway (ADA) flat inside handle. I'll need to drill through the door for the bottom mount, but I know what to expect after watching your video. Thanks!
Our door did not have the indented section to fit the latch plate into, so we had to chip that out of the door before installing the handleset. Thankfully, my 13 year old son has been getting some woodworking lessons from grampa, and he had a chisel and knowhow! That plus watching your video, and, voila! I have a new, working handle! Thanks for giving me the inspiration to tackle it on my own!
@@megofiachra3247 thank you so much for the kind words your comment has motivated me to do more DIY things. If you need anymore help just drop a comment and I will try to make a video. I'm glad you made a way to update your door have a good one!
Locksmith here, great work, but you don't want to use a drill on those screws. They strip very easily. You might get lucky, but you also might be unlucky and have a screw that needs to actually be drilled out. A good old screwdriver with a round shank is best, round so you don't scratch the finish. Great video.
Hi I have a schlage lever knob, one question should the shaft on the outer piece wobble around, looks like two pieces that wobble is this broken or do I need a new lock set,. This door is not the main entry and really isn't used that much, I had been opening it once in a while and one day it just wouldn't open and it is not really old? Help please.
Sorry for the late reply. Mine wobbles a little bit but not a lot. But if it wobbles a lot then you may have to get a different one. Also if there's not a door that you don't use that much there are cheaper product on Amazon that will give you the same look. I hope this can help.
@@ALWAYSOCCUPIEDTV thanks I need a schlage camalot lever type it does wobble a lot since they come in a set I guess I'll have to spring for it, I thought it was me
The front door of my house has this same type of door but I always find it hard to open from outside when coming from outside but opening from inside to go out is easy,is there any easy way I can open it without having to apply too much pressure in opening?
@@ohemaaafia9875 use a screw driver to loosen the screws that hold the unit in place. I’d probably loosen all of them a very little bit at a time to see if it gets better. I had to do this on my door, too tight and it didn’t want to turn
The instructions that come with this handle suck! Thanks for the drill bit info, I didn’t have 5/16 so I was able to make a quick trip to the hardware store!
What the ever living *&^*& is Shlage thinking. HERE WE HAVE THIS GORGEOUS OLD STYLE ANTIQUE CAMELOT FINISH SO WE CAN HAVE A HALF ASS UGLY ASS WASHER ON THE INSIDE FINISH? NOTHING SCREAMS RESTRAINING ORDER OR PREVIOUS DOMESTIC ISSUES THAN A REPAIRED DOOR WITH THAT LAWNMOWER BOLT ON IT. Still great video but the company screwed you guys on the design.... grrrrrr
Two things that really helped a lot. You mentioned the drill bit size and in the beginning you talked about the adjustable pin for the bottom of the handle. Thanks!
Np! Thanks!!!!
Lifesaver video! Thank you so much. My first time replacing deadbolt and handle. This helped so much. I appreciate you staying what size drill bit to use for the bottom hole. 👍
np, I thinking on dropping a video on some of the hardware features A lot of people may not know. thanks for viewing!!
Finally someone shows how to Uninstall the handle part. Thanks
Glad the video helps! Thanks for stopping by!!
I just installed one of these. The scariest part was having to drill through the door.
The curious thing is that it says you need a 3/8 (which really is 9.5 mm) or 10 mm drill bit. So I'm surprised a 5/16 (8 mm) worked. For me, the 3/8th was slightly larger than needed. That part only goes 1/2 way through the door. So I used a 1/4 inch drill bit to go through the inner side metal layer for the bolt.
I was sweating it. I wish I had found your video first..you made it such a non issue. Bound to give the confidence required :)
Thanks for the kind words! Nothing is wrong with being nervous. In a lot of the videos I make, I'm nervous, mainly if I have never performed or installed the product before. Fortunately, I install plenty of door knobs and handles. I'm glad everything worked out for you!
This video was a lifesaver for me, especially since I installed in this in December in Minnesota (brrrr). I also had to drill a larger hole, so the 5/16" tip was helpful. The instructions that came with it were not helpful at all. Glad I found your video!
Glad I could help!!!
So much better looking! I ordered the Greenwich matte black entry door handleset with the Broadway (ADA) flat inside handle. I'll need to drill through the door for the bottom mount, but I know what to expect after watching your video. Thanks!
Glad you can use this a a reference!!!! Thanks!!
Thanks! I’m not handy at all but I was able to install this doorknob after watching your video 👍🏽
No problem! If you need anything else. If I can do it , I’ll drop a video for it .
Email. Marcusdelyons@gmail.com
Thank you. I’m currently changing mines and I now have to drill a bigger hole for the bottom handle thing as well
Np!!! Happy I could help! 👍🏾
I got a different style of Schlage handle, and I'm completely buffaloed by doorknobs, BUT you make it look so easy, I am now going to go try...
Our door did not have the indented section to fit the latch plate into, so we had to chip that out of the door before installing the handleset. Thankfully, my 13 year old son has been getting some woodworking lessons from grampa, and he had a chisel and knowhow! That plus watching your video, and, voila! I have a new, working handle! Thanks for giving me the inspiration to tackle it on my own!
@@megofiachra3247 thank you so much for the kind words your comment has motivated me to do more DIY things. If you need anymore help just drop a comment and I will try to make a video. I'm glad you made a way to update your door have a good one!
Thanks for your efforts here. Just the info that I needed.
np more door videos coming!!! thanks for viewing!!
Your directions were excellent.
Thanks! I'm glad the video helped
awesome video, thanks so much for your detailed break-down, you are a great teacher. looking forward to your next masterpiece.
Thanks! most of my reviews I try to do a break down. I like helping people the best I can.
Thanks for the guidance! Super helpful.
NP! I'm glad the video helps!!!
Nice vid. Appreciate mentioning the drill-bit size!
Happy to help! Thank you for your kind words!
@@ALWAYSOCCUPIEDTV Just installed a different style of this handleset a couple hours ago and this video was a big help!
I’ve been looking for one like your old lock because it gives extra security. The newer locks don’t lock at the bottom which I have. Good job though..
I agree. It’s crazy how manufacturers took the lock away from the bottom. Thanks for watching!!
Just heads up. Next time take the inside knob off. There should be a set screw.
Thanks!!!
Locksmith here, great work, but you don't want to use a drill on those screws. They strip very easily. You might get lucky, but you also might be unlucky and have a screw that needs to actually be drilled out. A good old screwdriver with a round shank is best, round so you don't scratch the finish. Great video.
Thanks! . I know what you mean. I stripped plenty screws in the past.😅
does that locks from inside? Your old one had a lever on the knob.
HELLO, This product don't lock from the inside. you will have to purchase a dead bolt
@@ALWAYSOCCUPIEDTV so now you lost a lock. You got the color. Are you okay with that or do you miss the bottom lock you had before
I love how you say "A beginner can do this"..I bet I can prove THAT wrong....🤣
😂😂😂😂😂 this comment made my day. Lol. I am crying 😭
Thanks for the video. Super helpful.
Glad it was helpful!
Your the goat for posting this 🙏
Thanks more cool stuff and home upgrades on the way!
Awesome video, I’ll be installing mine soon
great!!!! it is a easy upgrade to the home, 👍🏾
Very helpful video, thank you 😊
NP!!! Glad it could help!! Take care!!
Hi I have a schlage lever knob, one question should the shaft on the outer piece wobble around, looks like two pieces that wobble is this broken or do I need a new lock set,. This door is not the main entry and really isn't used that much, I had been opening it once in a while and one day it just wouldn't open and it is not really old? Help please.
Sorry for the late reply. Mine wobbles a little bit but not a lot. But if it wobbles a lot then you may have to get a different one. Also if there's not a door that you don't use that much there are cheaper product on Amazon that will give you the same look. I hope this can help.
@@ALWAYSOCCUPIEDTV thanks I need a schlage camalot lever type it does wobble a lot since they come in a set I guess I'll have to spring for it, I thought it was me
@@RobertLofrano NO PROBLEM ANYTIME! I WISH YOU THE BEST!!!
Appreciate the video bro. Helped out a lot.
Glad the video help!!!!
Good stuff 👍 I’ll have to try this handle
its awesome !!!!
Thanks, the best part was the birds in the background IMO
Lol , got to love the birds!
Great video! Very informative!!! Thank you:)
no problem!!!thanks for watching!!!
Do the tutorial for the smart lock you have on top.
I have it in the works lol be on the look out this week coming!!!! thanks!!!
Thanks! Super helpful. BTW…If I don’t scratch something as I install it then I didn’t do it right! 😬
Glad it helped! don't worry, practice makes perfect. also you can wrap painters tape around screwdriver so it won't scratch lol
The front door of my house has this same type of door but I always find it hard to open from outside when coming from outside but opening from inside to go out is easy,is there any easy way I can open it without having to apply too much pressure in opening?
you might have to spray the inside hardware with lubricant, hopefully that will help
Try loosing the screws a bit. Some locks, if too tight cause the lock to bind
@@pouncerminned863 how do I do it? I mean to loose the screws with what?
@@ohemaaafia9875 use a screw driver to loosen the screws that hold the unit in place. I’d probably loosen all of them a very little bit at a time to see if it gets better. I had to do this on my door, too tight and it didn’t want to turn
Y videos como se hace al principio no lo suben
Ok
Thanks dude!!!
Np 👍🏾
Please straighten that dead bolt bro it’s killing me seeing it angled .other than that nice how to
Lol my wife says that every day 😂😂😂😂😂 I will get to it 😂🤣🤣💀
Yo trabajo en los principios de esos materiales
Wow
Father God loves You so Much ❤ 😇🙏🙏🙏🙏🙏⚡⭐🚀❤
🙏🏾 ALL OF US!!!! Thanks you for stopping by!!!
Muito bacana
NP!
The instructions that come with this handle suck! Thanks for the drill bit info, I didn’t have 5/16 so I was able to make a quick trip to the hardware store!
Thanks! I’m glad the video helped you out!!!
What the ever living *&^*& is Shlage thinking. HERE WE HAVE THIS GORGEOUS OLD STYLE ANTIQUE CAMELOT FINISH SO WE CAN HAVE A HALF ASS UGLY ASS WASHER ON THE INSIDE FINISH? NOTHING SCREAMS RESTRAINING ORDER OR PREVIOUS DOMESTIC ISSUES THAN A REPAIRED DOOR WITH THAT LAWNMOWER BOLT ON IT. Still great video but the company screwed you guys on the design.... grrrrrr
Thanks