@weakbit - why didn’t you re-lubricate the internal ejection track, cogs, and gears while you had it open? Also, the laser transport bar could use some lubrication. Will vastly extend its life.
I fix only the problem. I remember there was no need to lubricate the plastic gear to metal slider all work without drag. If you lubricate ones you should built all out and then clean it in the ultrasonic. But I don't do that it was in this case not necessary. There was on viewer why I don't change the caps if I have it open? and why I don't align the Laser-Current. This is the same as a car you can repair the failure/problem or you buy simple a new one. I can not waste my time on lubricating, re-caping, lens cleaning, laser-pickup change, change all the complete machine, important to cleaning the residue (the Industry don't do that and I don't do it - for what it is a isolation) inside. If you do this for you at your home private and you have time and fix a problem you can do it but in my case it was not necessary. I only see people they are lubricate the dirty slider in a drive this is bu****it - you must clean all with a chemical liquid and remove all the rest of the grease with a ultrasonic - and for sure you have right I don't do it in this case.
@@EnochLight One other thing - I want to built a CD-Player drive and my question is can I make it at home a DIY laserpickup with the 3D-printer maybe I want do this. Remember the technique is now over 40years old why we can't make it at home with the computer? this will be a cool project that everybody can print a CD-Player. What do you think about a project like this?
Thank you sir! I've so much problems to get the spar parts in 2023 - delivery delay from about 4months are now normal and I think what I make a 2nd Video channel? Are you interest in a DIY (Do It Yourself) build Amplifier with a lot of inputs like I think 8inputs and 4outputs and 1subwoofer out? maybe we should make a amplifier by our self? we make a cool thing.
@@Salty_Legionnaire - that's not an MD deck. The point was, the MDS JA555ES has about 10 pounds more weight to it because of the additional components - the power supply by itself is massive!
Das war mal einfach ! Ich habe auf einen Defekt des Laderiemens getippt. Aber, warum sind die Zahnrädchen übergesprungen ? Es muss eine Ursache geben. Wurde das Gerät kürzlich transportiert ?
Hello. I bought a second-hand SON MDS JA555ES, but unfortunately it says error C13 and ejects the disk. After examining it, I found that the disc does not spin or the optics do not light up, even with the service menu, endless playback. The magnetic head is focused and the optics are moved. I checked the limit switches. You would help me a lot if I could make it passable.
please download the service manual elektrotanya.com/sony_mds-ja555es.pdf/download.html - I've only repair ones this machine and there was so in my Video to see a mechanical issue that I fix.
@@weakbit633 thank you I already have this one downloaded too. I don't know if I should look for it as a problem with the optics or with the disc rotation. The disk should spin even if the optics do not work? It would help me, maybe, if I had an answer to that. Because there are some transistors in front of the optics that control it.
Hello ,New Subscriber here.( I hope you can help me).I have a SONY MDS JA 50 ES (NEW OLD STOCK).The problem is when i plugged in the standby light remains lit on red and nothing displays on the screen. When I press the buttons nothing happens. Except for (while pressing ams & rec i can access the service test mode).Any help from you would be greatly appreciated.Thanks
Sony MDS JA 50 ES - I'm sorry I've never hear from this machine. Did you find the service manual first this help me near all the time. download it here: elektrotanya.com/sony_mds-ja50es.pdf/download.html
Great job! Sweet deck! Greetings from Trinidad & Tobago😊❤
@weakbit - why didn’t you re-lubricate the internal ejection track, cogs, and gears while you had it open? Also, the laser transport bar could use some lubrication. Will vastly extend its life.
I fix only the problem. I remember there was no need to lubricate the plastic gear to metal slider all work without drag. If you lubricate ones you should built all out and then clean it in the ultrasonic. But I don't do that it was in this case not necessary. There was on viewer why I don't change the caps if I have it open? and why I don't align the Laser-Current. This is the same as a car you can repair the failure/problem or you buy simple a new one. I can not waste my time on lubricating, re-caping, lens cleaning, laser-pickup change, change all the complete machine, important to cleaning the residue (the Industry don't do that and I don't do it - for what it is a isolation) inside. If you do this for you at your home private and you have time and fix a problem you can do it but in my case it was not necessary. I only see people they are lubricate the dirty slider in a drive this is bu****it - you must clean all with a chemical liquid and remove all the rest of the grease with a ultrasonic - and for sure you have right I don't do it in this case.
normal I use: Nigrin Mehrzweck-Fett DIN51802 und DIN51825 -30°C till +120°C Art-Nr.74145 4008153741456 Made in Germany Nigrin.com
@@weakbit633 - well alrighty then! Makes sense.
@@EnochLight One other thing - I want to built a CD-Player drive and my question is can I make it at home a DIY laserpickup with the 3D-printer maybe I want do this. Remember the technique is now over 40years old why we can't make it at home with the computer? this will be a cool project that everybody can print a CD-Player. What do you think about a project like this?
Congratulations 🍾 sir
Thank you sir! I've so much problems to get the spar parts in 2023 - delivery delay from about 4months are now normal and I think what I make a 2nd Video channel? Are you interest in a DIY (Do It Yourself) build Amplifier with a lot of inputs like I think 8inputs and 4outputs and 1subwoofer out? maybe we should make a amplifier by our self? we make a cool thing.
@@weakbit633 i like subwoofer low pass filter sir you have schematic diagram ?
Chapeau, Queen Live-killers - masterpiece
Original recorded in Londons BBC live!
Look inside the MDS JA555ES 😂
Look inside the CDP-XA555ES
@@Salty_Legionnaire - that's not an MD deck. The point was, the MDS JA555ES has about 10 pounds more weight to it because of the additional components - the power supply by itself is massive!
Das war mal einfach ! Ich habe auf einen Defekt des Laderiemens getippt. Aber, warum sind die Zahnrädchen übergesprungen ? Es muss eine Ursache geben. Wurde das Gerät kürzlich transportiert ?
Force from outside maybe a kick by foot ----- Gewalteinwirkung von aussen - z.B. in die Lade rein tretten! ----
Hello. I bought a second-hand SON MDS JA555ES, but unfortunately it says error C13 and ejects the disk. After examining it, I found that the disc does not spin or the optics do not light up, even with the service menu, endless playback. The magnetic head is focused and the optics are moved. I checked the limit switches. You would help me a lot if I could make it passable.
please download the service manual elektrotanya.com/sony_mds-ja555es.pdf/download.html - I've only repair ones this machine and there was so in my Video to see a mechanical issue that I fix.
@@weakbit633 thank you I already have this one downloaded too. I don't know if I should look for it as a problem with the optics or with the disc rotation. The disk should spin even if the optics do not work? It would help me, maybe, if I had an answer to that. Because there are some transistors in front of the optics that control it.
What grease do you use?
Nigrin Mehrzweck-Fett DIN51802 und DIN51825 -30°C till +120°C Art-Nr.74145 4008153741456 Made in Germany Nigrin.com
Does it weigh the same as a bull ?
Haha it is heavy like a cow! but you must see the size differnence between a Minidisc and this machine itself!
Hello ,New Subscriber here.( I hope you can help me).I have a SONY MDS JA 50 ES (NEW OLD STOCK).The problem is when i plugged in the standby light remains lit on red and nothing displays on the screen. When I press the buttons nothing happens. Except for (while pressing ams & rec i can access the service test mode).Any help from you would be greatly appreciated.Thanks
Sony MDS JA 50 ES - I'm sorry I've never hear from this machine. Did you find the service manual first this help me near all the time. download it here: elektrotanya.com/sony_mds-ja50es.pdf/download.html
@@weakbit633 Oke ,thank you.
👍
What is that accent? This electronics engineerer/repairer is oddly engaging.
I don't have a accent - haha you can hear it I'm not a native. Sorry maybe the subtitle is working with the "CC" button in you computer/mobile.