Thank you for watching. I remove dust and dirt with a surfactant. Rust is removed with a rust remover, but recently I've been using strong citric acid.
PLease, next time you do one of these do not use abrasive brushes or chemicals to remove the rust, convert that rust into ferro ferric oxide (BLUING) by boiling all of those items in water. This restores some of the oxidised steel into bluing which can hold oil and prevent further rusting. grinding off or etching off the rust means you LOSE all that protective potential.
@@KITUNEBI-ch I learned this by watching all of Mark Novak's videos here on youtube, he is probably the best gunsmith in the entire united states and he is very articulate and has a good way of explaining things. rust bluing is how the old timers would blue guns, they would do something to make them rust then boil them in water.
色々参考になりました
私も倉庫の奥にねむる古い道具を治して使おうと思います
素晴らしい動画でした♪
ご視聴ありがとうございます
そう言って頂けると嬉しいです！
12:24 切れ過ぎw気持ち良い👌
Good sprit, good work. Congraturations！
I think you might want to add thickness on the bottom of the plane, the mouth of the Dai is quite wide now
Thank you for watching. Thank you for the wonderful advice 😊 I will use it as a reference.
鉋かける時は、刃ではなく台を持つと良いですよ。
台は平らでも削れないので、台直しする事もお勧めします！
ご視聴ありがとうございます😊
裏金の調整や台直しは一応しましたが、動画がとても長くなってしまったのでカットしてしまいました。
最後辺り、駆け足な動画構成になって申し訳ないです、、
木 すりかわってる 継ぎはぎの材料は どこに
ご視聴ありがとうございます^ ^
木 すりかわっていませんよー
カンナをよみがえらせるよりカンナのつかえる家を作らせて欲しい！そう思うのは私だけ！
Can I propose to you a recipe to remove dust?
Bicarbonate of sodium plus white vinegar.
Thank you for watching. I remove dust and dirt with a surfactant. Rust is removed with a rust remover, but recently I've been using strong citric acid.
最近大工道具を触り始めた者です。
#3000の時なぜ最初少し引いていたのですか？
ご視聴ありがとうございます😊
3000番の仕上げ用砥石の時少し引いていたのは、刃先（鋼の部分）を鋭く整える様に引いて研いでいました。
正確な角度と、刃先の鋭ささえ出せれば抜群の切れ味になりますよ^ ^
@@KITUNEBI-ch
次回からやってみます！ありがとうございます😭
なんか、海外の方の動画を見ているようでした。w
ご視聴ありがとうございます🦊
海外のrestoration動画を見るのが好きなので、真似をして作ってみましたw
楽しんで頂けたなら嬉しいです😃
Practical
PLease, next time you do one of these do not use abrasive brushes or chemicals to remove the rust, convert that rust into ferro ferric oxide (BLUING) by boiling all of those items in water. This restores some of the oxidised steel into bluing which can hold oil and prevent further rusting. grinding off or etching off the rust means you LOSE all that protective potential.
Thank you for watching. Thank you for the wonderful advice and comments. I'll try something like that next time.
@@KITUNEBI-ch I learned this by watching all of Mark Novak's videos here on youtube, he is probably the best gunsmith in the entire united states and he is very articulate and has a good way of explaining things. rust bluing is how the old timers would blue guns, they would do something to make them rust then boil them in water.
初めましてこんにちは。
鉋の刃机の上等に置く時は鎬が下になるように(刃先と机等が接触しないように)置く方が良いですよ◎
台治し、裏馴染み等も治すと更に良くなると思います🙏
نعرف الضرب فوق مش المؤجرة
Hello
Thank you for watching
@@KITUNEBI-ch thanks
最後のカンナかけでエッとおもいました。