You need to tune the clutch via the screw for the springs. Run them 2 turns in from flush with the medium springs. You want the clutch to essentially stall you until its in your powerband, which on that cranks pipe starts around 6k. Once it stops slipping and grabs you’re already where you make the most power so it takes off better.
Stiffer springs and thinner oil let it rev higher before the clutch kicks in so your in the power when it does hit. I use the og 3shoe with 0w-20 synthetic motor oil my clutch doesn't engage until like 6k rpms and holds tight til it hits the wall in the pipe. You also can screw with how many turns in or out on the clutch springs will help
i can get you an original 2 speed maxi engine with kickstart from factory if you ever wanna build a crazier bike. So fun riding with a clutch lever and a footbrake on these bikes !!
Your manifold could be replaced by a Polini Big Valve intake for the Peugeot 103 SPX, that way you have a much bigger reedvalve and the carburettor is facing forward.
I used to ride puch when i was younger but i reccomend you to try jawa pionier. Its 50cc 3speed manual 3,5hp stock but when you tune it only a little bit you have a beast... XD
Your all scooter are bad ass keep up guys doing good i lick to put some muick on mine i diden no u could do that three mpplayer in it deack it out puts some lighs on it
The brace on the frontforks are only suppost to be on the front side bro [i never seen a double sided one] its also not needed for strength just front sided one is strong enough. Mine has just a front one and i rode with a simelar 65cc setup for years tuned for top speed as i rode long distance [went a solid 110 kmph no matter the conditions] also i preferd the clutch with 3 shoes and proper spring set up its a bit of an hassle getting it right to the rest of the mopeds parts and personal liking But as i said bevore digging the build and content!
My sister back in the day got a brand new one for her graduation. I used take and ride it when she was at work 😂😈She found out and kicked my ass 😂 she was a tough girl and I was young
Honestly, I think you didnt need to change the gearing, but tune the carb. Mopeds need there carbs tuned for all the rev ranges unlike scooters with CVTs that only need to be tuned for a rev range and the CVT takes over and keeps you in that optimum power band. What you experenced there is a carb tuning issue. These old mopeds with tiny carbs need very fine tuning to get just right for all rev ranges. I suggest getting the bike running perfectly without any bogs before changing sprockets.
Ive seen videos with other builds where they went to the kickstart adapter...i think thats whats causing it more than your actual clutch. I know some of them had to sand the plate down as it was creating pressure agains the clutch, so that might be worth cheking out. Maybe swap back to pedals for a minute and see if it proves that? Build is looking great tho!!
Thats how u do it bet it would go faster bad ass u guy are doing good on them u choun have no problem selling them they ben al kinds of wont mine cheep on gas to just take tree doller to phill it up the fun to ride u see the dreafearnt whacth how fast it would go now
My puch always breaks and its very ungrateful no matter how much money and time i put in still doesnt work right. Its a fun little bike but more workimg on it them riding 🤣. Its going on the marketplace frfr
Thats the way it should run better put some in it soon that thing will fly on my oart its beats walking speachley if u aint got no linceance per feart put u some gard on were your hands go so it will not make u reack
at 49 years old your videos have really made my want to get back into old school mopeds and scooters.
34 but yeah need a z one now 😅
Absolutely do it.
Do it !!!❤ do what you want and dream abute 🤩🤩👌
do it, im building a 74cc puch maxi rn and i hope shes a ripper once im done
33 and 3 years in. Do it.
You need to tune the clutch via the screw for the springs. Run them 2 turns in from flush with the medium springs. You want the clutch to essentially stall you until its in your powerband, which on that cranks pipe starts around 6k. Once it stops slipping and grabs you’re already where you make the most power so it takes off better.
“Vol gas met Joey” is also a dope channel he’s Dutch and has his own shop and always some crazy builds
Clean bro...when that power band kicks on its trying to go to the moon
🚀🚀
you also can play with the air and gas amount at the carborator to make it more top or low end
Stiffer springs and thinner oil let it rev higher before the clutch kicks in so your in the power when it does hit. I use the og 3shoe with 0w-20 synthetic motor oil my clutch doesn't engage until like 6k rpms and holds tight til it hits the wall in the pipe. You also can screw with how many turns in or out on the clutch springs will help
Nice, looks just like the one my uncle used to have. 😍
… he wouldn’t let me ride it, but he let me drive the three wheeler all the time. 😊
Stoked got to see a few wheelies in the vid yeeeheeeee🤙🏽
yessir!
Love a good Puch. 💪
i can get you an original 2 speed maxi engine with kickstart from factory if you ever wanna build a crazier bike. So fun riding with a clutch lever and a footbrake on these bikes !!
What do you mean from factory? is there a company still making the engines? in what country[s]
finally ! love it, am also builiding one
so sick , thanks man!
Man I need to get my streetmate back running there is no feeling like a nice two stroke hummer
Your manifold could be replaced by a Polini Big Valve intake for the Peugeot 103 SPX, that way you have a much bigger reedvalve and the carburettor is facing forward.
I know they have a large aftermarket for these in Europe, how about in the us? Run it on e85 and use proper lube for alcohol, it will run way cooler
❤ the pookie
Turned out nice man! Looks like a blast!
I used to ride puch when i was younger but i reccomend you to try jawa pionier. Its 50cc 3speed manual 3,5hp stock but when you tune it only a little bit you have a beast... XD
Solid unit😮💨
Man that thing's a little ripper 👍👍
See the dreafearnt now u are fling thats bad ass thums up my new freand love u guys
I have a puch with some trick stuff, you ever take on work?
Pop a wheelie when going faster best feeling fr
Big wheel gang tomos gang
Your all scooter are bad ass keep up guys doing good i lick to put some muick on mine i diden no u could do that three mpplayer in it deack it out puts some lighs on it
when you start making power on these puch maxis the clucthes start slipping og exploding i would use af derbi senda clucth
Looks super nice😍
looks great!
thanks dude!
these types of small mopeds are popular in my country Sweden. not a lot of nice builds here on youtube but this one looks sick. @@MOPBOYZ
love the build man. what temps are u getting?
max 320-330 so far
The brace on the frontforks are only suppost to be on the front side bro [i never seen a double sided one] its also not needed for strength just front sided one is strong enough.
Mine has just a front one and i rode with a simelar 65cc setup for years tuned for top speed as i rode long distance [went a solid 110 kmph no matter the conditions]
also i preferd the clutch with 3 shoes and proper spring set up its a bit of an hassle getting it right to the rest of the mopeds parts and personal liking
But as i said bevore digging the build and content!
Hey bro how can I get my Suzuki fa50 faster? I think I’m around 22mph. Lmk what is some good upgrades?
Looks good
thanks dude!
You must come live in holland you have so much parts for puch puchmaxi experts her in holland
The Netherlands.. not Holland smf
cool😮 looking bike
My sister back in the day got a brand new one for her graduation. I used take and ride it when she was at work 😂😈She found out and kicked my ass 😂 she was a tough girl and I was young
i run the jammer on two of my bikes without issue and they feel great 🤷 maybe the ID of the flywheel is too big?
Honestly, I think you didnt need to change the gearing, but tune the carb. Mopeds need there carbs tuned for all the rev ranges unlike scooters with CVTs that only need to be tuned for a rev range and the CVT takes over and keeps you in that optimum power band.
What you experenced there is a carb tuning issue. These old mopeds with tiny carbs need very fine tuning to get just right for all rev ranges. I suggest getting the bike running perfectly without any bogs before changing sprockets.
Make the gearing long, tune the carb, then change the gearing.
Ive seen videos with other builds where they went to the kickstart adapter...i think thats whats causing it more than your actual clutch. I know some of them had to sand the plate down as it was creating pressure agains the clutch, so that might be worth cheking out. Maybe swap back to pedals for a minute and see if it proves that? Build is looking great tho!!
Love it bro💪🏼😍
same man, thanks!
I beat them would be good to get your moter cickales with just if u reck run u wont have a big kost i it
I'd say the 14t would be perfect
I’m having trouble finding where to buy one of these mopeds. I live in Brisbane Australia can somebody help me
smart carb the puch
Thats how u do it bet it would go faster bad ass u guy are doing good on them u choun have no problem selling them they ben al kinds of wont mine cheep on gas to just take tree doller to phill it up the fun to ride u see the dreafearnt whacth how fast it would go now
Yessirski
you should visit germany, puchs here will hit 70mph easy
just takes some taller gears and this would hit 70 easy as well !
@@MOPBOYZour Puchs Hit 70mph With Good bottom end 😉
I think you got like a gearbox for them right ? So you get 2gears 🤷🏼♂️
no it’s single speed
@@MOPBOYZ I know 🤣 but you can make them with a 2 gear gearbox but they say it’s weaker but maybe you can think of something to make it better 🤷🏼♂️
is puch a danish brand or no? because i live in denmark lol
made in austria
Steyr daimler Puch was in Graz
@@MOPBOYZ oh ok cool. I didnt know
What is the Setup?
full build for motor is a few vids back!
Is it true That you can ride that thing fully legal on the street? 😬
yes
Take a look at the video 130km/h Puch Maxi TOPSPEED test - RIBENS you might like :)
Get a fricken fork stabilizer and front fender!!!
i put one on in this vid lol
Curious if you ever have problems with your neibors 🤣🤣
My puch always breaks and its very ungrateful no matter how much money and time i put in still doesnt work right. Its a fun little bike but more workimg on it them riding 🤣. Its going on the marketplace frfr
full build time !
Herd bad things about those treatland clutches bro
i wasn’t a fan !
I have a 1978 Vespa piaggio grande and I just want it to be fast
Tou sould get a gilera runner or skipper
i wish
runleader temp gauges >>>>> trailtech, cheaper and has rpm and temp in one gauge
Something in the gears sounds off
it’s because they’re straight cut gears , they make that shunning sound
@@MOPBOYZ i figured, but there is an oscillating sound, more than usual. Makes me think something is off-balance
Thats the way it should run better put some in it soon that thing will fly on my oart its beats walking speachley if u aint got no linceance per feart put u some gard on were your hands go so it will not make u reack
You can get a better exhaust 🙈🙈
Second
third
first
Looks good