ULTIMATE MOPED BUILD FIRST START! Puch MAXI 64cc
Вставка
- Опубліковано 26 сер 2023
- Its been a long time in the making for the 1977 puch maxi stunt build but man was I happy to hear its first start. We finished up the kickstart conversion, got our new custom exhaust, set timing for the ignition & much more in this vid! THE ULTIMATE MOOPED IS HERE!!!
-
WANT TO JOIN MOPBOYZ? MERCH & ACCESSORIES HERE : www.mopboyz.com/
-
NEED SCOOTER PARTS? USE CODE "MOPBOYZ" & SAVE 5%. CLICK HERE:
scooterswapshop.com/?ref=MOPBOYZ - Авто та транспорт
somebody give this man a derbi or am6 engine 🔥🔥🔥🔥🔥🔥🔥
aprilia rs50 build when???
I have my Am6 motor into pieces right at the moment😅
derbi❤
Svensk?
You know he already has a derbi gp1 right?
The dog looks super excited to see the bike run 😂
Give this man a Yamaha Aerox 70cc
he has the phantom f12 also minarelli horizontal
hes done many builds with other youtubers like rc94cc and shit and his zumas wich are amazing. personally i have jog rr so yes i know what im saying
That was a nice video.
In the Netherlands they speak Puch out like ´ Poogh ´.
Back in the days i had the same Polini 65cc cilinder , it was a wild cilinder i remember.
In England its called a "pooch" as in a dog !!! 😂
Kinda been waiting to see this.... It looks like it's going to be a ripper
Tomos gang Puch gang big wheel gang
Wooooo! Keep it up man! Thanks for the shout out! Get a fork brace on that bad boy. The polini e50 is such a great build. This is going to RIPPPPPP
Lookin and soundin mean!
When adjusting ignition points it's not ideal to judge opening by looks. You can make a simple light or a buzz box that will tell you when the points are actually open. If you don't want to do that, you can use a cigarette pack cellophane. You take a small piece of cellophane and place it between the point contacts (when they are fully closed). Pull on the cellophane very lightly as you slowly rotate the flywheel with your other hand. When the points release the cellophane is when they are open. You can also use a matchbook cover as a feeler gauge to set the point gap (it's approximate correct thickness). Also, make sure you adjust the point gap before you adjust the timing/firing position, as making the gap larger or smaller affects when the points open
Loud..is good. More Power!! U will get it. Right mr mop. Great job. Old man mop
Ryan built my pipe and intake for my Tomos, He's the man!!
I always like to give a little fun fact:
My dad was top salesman for a company in Southern California ..Placentia California to be exact and the company he worked for was called SportMag2 and they manufactured mag wheels mostly for mopeds. They also made wheels for motorcycles , sandrails, and BMX bikes. My mom's little sister was probably 14 or 15 at the time and she got hooked up with magwheels for her Puch and got to be on the cover of one of their catalogs. My dad ended up becoming a partner & one day in probably 1980 the dude Larry (the CEO) called his 20 year old son to the shop and my dad too and as the 3 of them were talking in Larry's office...Larry excused himself to go use the restroom in the machine shop and that's when my dad and Larry's son heard a gunshot. Larry took his own life in the restroom and he used a gun that he (Larry) manufactured himself. He was known to have been a gunsmith and sold some blueprints to Smith and Wesson ..
I think this took place on july 20th 1980 or 82.....
Ruined some families and the business since he was the main owner and CEO....his wife sold it off and my dad and the other partner pretty much got screwd. The worst thing is that he wanted his son there when he did it for unknown reasons. Dick
Sorry to say it, but 'murica.......
Here in Europe, he would have wrote a strongly worded letter....
I had an old Puch back in 1978. Had a blast with it. Wish I had it now.
sounds so sickkk
Yes a Temp gauge on a AIR cooled cilinder make Total sense.
And nice PUCH
Greetz from the Nederlands
yessir minty builds
Clean build
Nice work
Such a nice bike sounds great... can't wait to see u mobbin on it
Amazing video my man 💯💯💯
love it, miss times of puch maxi
Good job sounds awesome 👌
Insane build fasho wow soooo tough💪🏼😤
i've always wanted a puch man. love the 2 stroke sound
Nice video guys! 🔥🔥
Finally!, have been waiting for this video for a long time :)
Also with the flat plate behind the spring plate it will compress the spring plate further and make it hold harder
yo sick vid man maybe get a race ignition it help a loth with take off here in the Netherlands we use them a lot on puch and Tomos
i used the 64cc polini kit been on there with a 16mm carb hits around 47 mph with a techno expansion pipe and open air cleaner
Cool moped😊👍🎖
sick Stuff guys :)
Am6 derbi will be a nice build series man hope youll do it in the future
I had this puch back in 2001, 80cc was going 100kmH
sickkkkk
I would get a small airfilter. And change the ignition. But a sweet ride.. Had a few as a kid
Oh also a hpi ignition would prob help you more than anything. The mini rotor. Best of luck to you ✌🏻
Exhaust is wild 😂👌
My 78 puch maxi is basically a ratrodded version of yours. Its fucking awesome!
boys in Denmark love mopeds but the mopeds in the us is much more different cuz in Denmark they ride like pgo hot 50, Yamaha jog r, jog as/fs or puch maxi and I just think if the mopeds some boys make in Denmark would blow away Americans (almost every moped can go 170 km/t and its supposed to only go 30 km/t so if u cold make a really fast maybe jog as (the jog u already have) I would enjoy watching. thanks.😁😁
You may want to do a ktm clutch swap to do wheelies very well. And you want a smaller main gear on the case.
But you def want to use the softest springs you have. Bc you want them to engage quickly. Stiff springs don’t engage till you’re higher in the rpm’s.
It might like more timing like 30°
Tuned my moped with an 69ccm engine 😈😈😈
God did
Man I fckin hope I get this new job I’m going for my streetmate got left out in the rain gotta get a few new things nothing crazy just tune up, front rotor rubs (new brake party from treats) new pedals and blinkers or just delete. I need to get er up and running
this dude is hilarious man. you must annoy the hell out of the neighbours with your projects LOL I couldn't stop laughing watching you ride that puch, it's sooooo loud LOOOOOL
More timing will also cool down the exhaust bc more fuel will burn in the cylinder and not in the pipe
That's a nice Puch Maxi! I'm new to this channel but have you already had a yamaha aerox, gilera runner or Aprilia SR? They were and probably still are THE sh*t in my country. For mopeds my suggestions are Citta, Tomos and Vespa/piaggio ciao. My dad owned a Kreidler and a Zundapp in his youth, also very cool small engine bikes to check out 👍
The clutch needs the flat plate against it on the outside of the clutch will wear out if the spring plate is riding against it
Where did you get the EBR forks for your blue prebug?
Direct from EBR?
they used to sell them on scooterswapshop , i don’t think they’re available anymore
build the piaggio ciao bro🔥🔥🔥🔥
pls put the light in the middle
it will look much better
Would be insane to see you build a Gilera Runner 180cc.
Probably hard for you to get one though.
Nice Jopa barpad by the way haha, thats an mx clothing company here in The Netherlands
64 Cc good🎉🎉🎉🎉🎉🎉
Consider a hpi or mvt ignition. Alot lighter flywheel :)
the clutch must be dry then?
buy a MVT ignition it ads a lot more power and more
should have gone with the 74cc and hpi or mvt ignition
SHOULD HAVE FOLDING FOOTPEGS AND PUT IN UP POSITION STARTING SOMEONES TOOK OFF SHOVED POLE THROUGH MANY PEGS AVAILABLE STANDARD TO CUSTOM ON EBAY ALONE
👍🏻
Exaust name ? Or type
You should have a few C Cs of Castrol 2 stroke oil into the barral , then put the plug in , that cylinder was bone dry .
oil doesn’t evaporate, there’s still oil in the cylinder from assembly dude haha
@@MOPBOYZ Ok wanker but its been re -assembled , sorry i for not knowing what am talking about being a former Minareli trained technician working on AJW bikes .
@@jezztech it’s ok that you don’t know what you’re talking about man! no worries, hope you learned something !
@@MOPBOYZ yes i have learned that you are a wanker
@@MOPBOYZ I have learned that you are a shoddy worker, if your happy to come across that way ? fine.
50.1 oil ratio
A little late to the party but.
Sound like the clutch is kicking in too early. Might need some stiffer springs. It'll help a lot with acceleration, since the engine doesn't have any downlow power. You also might have to retard the timing to 14-16 deg before TDC, other with you'll overheat and seize the cylinder.
nice puch :) What kind of exhaust is it?? :D
crank pipes custom!
@@MOPBOYZ Tak :D!
Give this man a simson s51 or a yamaha jog r
take your safety sliders off it,ll kick first time
All Stores Please Lower the price of all Military and Local for all Brands of Moped Products and Accessories and Production Cost Now That's too much $$ The Whole World Now 🙏🙏🙏
That’s like the worst cable routing for the throttle, but sick bike otherwise!
just temporary , the cable i got was way way too long
All Stores Please Lower the price of all Military and Local for all Brands of Moped Products and Accessories and Production Cost Now That's too much $$ The Whole World Now 🙏 🙏🙏
I have 2 of these ! Anyone need parts ? lol one came with a full rebuilt bottom end on the motor i wanna put a pipe on one
I don’t think you should of left that clutch in oil it’s a dry clutch isn’t it
no it’s not a dry clutch lol, it sits in an engine full of gear oil
@@MOPBOYZ ahh sweet man I thought it was dry 🤣
Buy a SYM Mio 50-100cc
Wheelies on a maxi I want to see this.. video or it's not real.
Swiss 14yo laughing in 74cc italkit
Sorry abr zum schneller si wi de bruchsch en 50ccm und meh ned wend weisch wa tua, i frög mi eifach wa de föö a zündig het daser soo viel kabel brucht, i mein mit minere Hpi hani weniger kabel
Lmao thats a 2 stroke power exhaust lmafao
yes and this is 2 stroke.
😂 He is working on a 2 stroke what vid you watching
2 stroke sounds more lk a 3 stroke lmao 😂
Puch not pooch
tomato tomato
Who tf soak’s his clutch in oil
you’re supposed to soak any wet clutch in oil before putting them in…. same as you would any dirtbike, atv..
@@MOPBOYZim modifiing Puch e50 enigines since 8years and i never put my clutch in oil, and every time its running perfectly. Full throttel on the first Kilometer
@@Skyplayify any clutch that is a wet clutch is supposed to be soaked 24 hrs before install to prevent the fibers on clutch from coming apart when clutch first gets hot my dude . look it up , will save lifespan of your clutches a ton. it’s also in the puch maxi manual to do so, as it is for any wet clutch !
first
"So deep and so long", "everything is rubbing "!!!
God did