Beautiful, but very expensive + the charging is very wrong with the batteries. There must be a charging circuit in it + each battery is connected by itself, or they are charged in parallel
Although this is a good idea, it was thought out poorly. -With a display, compatible with lattepanda, you could just miss the display-driver part. -With such a thick housing it could fit 3X the battery. -Even if you want to use such little battery, just change the lattepanda to a raspberry pi and it consumes less power. -Displayless boost converter would consume less. -The hinge system is OK for a homebuild, but it should house less thick cables for a better look.(especially causes a problem when closing down, as visible on vid)
@@AhmadFarzadTaquee As an electrical engineer I believe it is quite doable for me, thanks. I have given ideas so that in the unlikely case someone wants to make this 'laptop' it can be done more efficiently and in a more long-lasting manner. I could have highlighted important parts, like the use of the mini BMS, but if one doesn't know the importance of that, then one should not even begin to build such a project, since it would probably be a nice fire hazard.
the finished product looks great. However, there's a lot of wasted space inside the structure of the laptop, and a lot of components don't appear to be secured down properly. Also, it looks like you were in a rush to complete the build, which would affect the longevity of the laptop. I look forward to seeing improved builds.
This is so amazing oh. This inspired me on my project that I intend to build. So I wish to ask how much does it cost for someone to build a laptop like this, and how do I get to start? I'm really anxious about it. This was so excellently
I built a similar device at home and can share my experience: Use rpi zero w or analogues (I took banana pi) and put a laptop cooler on it: for the purposes of such hardware, there is enough performance, it is better to install linux: again, performance. Zero w is compact, you can arrange the elements more tightly and put more batteries (read about parallel and serial connection) About charging, add a protection board, buy a fast charging trigger board, so you can charge using type-c
I have a question. Should both the voltage be the same when connecting the ADD board and the latte panda? Does it work for LP097x02-SLQA IPAD-3 AD board with DC connector and Latte panda 4pin or only for AD board in the video?
Hello The assembly of the laptop components is so amazing. Please can you tell me how much it cost you to build a laptop. Second question, how do i start?
In Europe it is difficult to get all the components very cheaply. This only makes sense when you can build a machine with a first-class CPU, graphic card, and mainboard for half the price of a laptop from a store would cost.
Hey there question would Lattepanda be able to run stuff like blender, zbrush, vroid, etc. Was wondering if it could Ru. Those along with some games even some high end ones if possible. Srry new to these stuff so don't know if Lattepanda is more geared to emulations and browsing
yes because the lattepanda is kind of a ripoff. you get a 2 core cpu for 600 usd. that is just a terrible deal. I mean I got a 4 core laptop for half the price. i mean my laptop has no fan, the lattepanda does but it has a worse cpu
I had a small doubt i.e how much standby time does it give with 3s battery pack. I am planning to use a 4s battery pack with a bms to directly give power to my raspberry pi and boost converting it to 12v to give it to my display controller. This is one approach or should I just use 4 18650 cells and a powerbank module to charge it as well and power 5v to raspberry pi 4 and 12v to display controller via dc to dc boost converter??
series cells doesn't increase capacity, they increase voltage. you need parallel cells, and the capacity is gonna be determined by the quality of your cells. want a tip? recycle cells from old batteries from laptops, not all cells on them are bad, and work just fine
Wow you made it without using 3d printer good job👌👏👏👏👏👏👏👏
thnx
@@SaptarshiSikder please give me all the list of items use please
You made it good
@@ifenyiwacharity7906 description, read desc ffs
Voice aati hai kya laptop me
It's even better then my real laptop
No backlight
No windows 11
No SSD
I really appreciate it 👍👍☺️
thnx
Dude your laptop is awesome it doesn’t have windows 11
windows 11 or lower doesnt matter, lightings doesnt too. the performance thats what matters.
When have they ever made laptops without backlights?
@@abatallWhy?
Nice job!
There are some display that you can use directly with the edp port of the lattepanda. You save a control card and power routing !
hmm
@@SaptarshiSikder I love you
@@tokedematthew5451then go and marry him 🗿
This is an amazing build
But using 3d printing It would have been way cleaner and smooth
not everyone has a 3d printer
I mean, I do but that isn't the point.
Beautiful, but very expensive + the charging is very wrong with the batteries. There must be a charging circuit in it + each battery is connected by itself, or they are charged in parallel
Good laptop but If you're gonna make this a toutirial i would reccomend some protection of the battery discharge/charge
ok
Although this is a good idea, it was thought out poorly.
-With a display, compatible with lattepanda, you could just miss the display-driver part.
-With such a thick housing it could fit 3X the battery.
-Even if you want to use such little battery, just change the lattepanda to a raspberry pi and it consumes less power.
-Displayless boost converter would consume less.
-The hinge system is OK for a homebuild, but it should house less thick cables for a better look.(especially causes a problem when closing down, as visible on vid)
Don't look at his faults, 🤨you can't even do what he did.
@@AhmadFarzadTaquee As an electrical engineer I believe it is quite doable for me, thanks. I have given ideas so that in the unlikely case someone wants to make this 'laptop' it can be done more efficiently and in a more long-lasting manner. I could have highlighted important parts, like the use of the mini BMS, but if one doesn't know the importance of that, then one should not even begin to build such a project, since it would probably be a nice fire hazard.
yeah the laptop could be thinner with a slimmer battery, if they want the battery to be that small
It's looks good 😍😍 specially the lighting part... 🤩
Thanku
How much money did it spend for you
i wonder something Why is it necessary to separate the buttons between the screen and the computer? Why not make them the same button at all?
Wow you gave me an idea to to this on my old ibm laptop! 😍
the finished product looks great. However, there's a lot of wasted space inside the structure of the laptop, and a lot of components don't appear to be secured down properly. Also, it looks like you were in a rush to complete the build, which would affect the longevity of the laptop. I look forward to seeing improved builds.
thnku
This is so amazing oh. This inspired me on my project that I intend to build. So I wish to ask how much does it cost for someone to build a laptop like this, and how do I get to start? I'm really anxious about it. This was so excellently
Thnx bro
Lattepanda 450$, display + ctrl card ~80$, keyboard 30$ maybe, battery 10$, cables+buttons 20$.
So my guess is around 600$
I built a similar device at home and can share my experience:
Use rpi zero w or analogues (I took banana pi) and put a laptop cooler on it: for the purposes of such hardware, there is enough performance, it is better to install linux: again, performance.
Zero w is compact, you can arrange the elements more tightly and put more batteries (read about parallel and serial connection)
About charging, add a protection board, buy a fast charging trigger board, so you can charge using type-c
How did you build it
I have a question. Should both the voltage be the same when connecting the ADD board and the latte panda?
Does it work for LP097x02-SLQA IPAD-3 AD board with DC connector and Latte panda 4pin or only for AD board in the video?
yes voltage are same 12 volt
good job, but can you please cut a hole for the pc fan? without a hole the heat will trap inside and damage the hardware
Hello
The assembly of the laptop components is so amazing. Please can you tell me how much it cost you to build a laptop. Second question, how do i start?
contact me in my instagram id
In Europe it is difficult to get all the components very cheaply. This only makes sense when you can build a machine with a first-class CPU, graphic card, and mainboard for half the price of a laptop from a store would cost.
Your videos are 100000 present real
Is there any other way to make a latte panda alpha switch? It's because the toggle switch was too big and it didn't fit two pins
Hey there question would Lattepanda be able to run stuff like blender, zbrush, vroid, etc. Was wondering if it could Ru. Those along with some games even some high end ones if possible.
Srry new to these stuff so don't know if Lattepanda is more geared to emulations and browsing
this is nice, plastic is not used. 8gb-64gb. last thing needed is better/tougher outer part
Looks amazing but I think it would be cheaper to buy a regular laptop.
yes because the lattepanda is kind of a ripoff. you get a 2 core cpu for 600 usd. that is just a terrible deal. I mean I got a 4 core laptop for half the price. i mean my laptop has no fan, the lattepanda does but it has a worse cpu
Ok cool but what about USB?
Mini laptop kinte koto taka lagbe please replay den
Your brain like a computer Bro😲😲
Thank you, what is the name of the keyboard?
check description
This pc is thicc that if it falls nothing happens to it, great job btw!
The laptop is simply faster than mine
How to name this power board
Does it tell you how mutch battery is in it, or do you just have to guess when to charge
Bro mujhe sara saman chaiya kitne ma aayga
Bro instead of lattepanda can weuse because it's very costly
How much it will cost
So in this case hardware like processor, graphics card etc are upgradeable?
How are these tools to make this I am from Egypt
Why did you add a fan 2:55
This laptop is very awesome bro👌👌👌
Can I use this for running any of pcb designing software and Arduino droid extra?
yes
If I don’t have 3D printer and I want to make it can you tell me how can I
I had a small doubt i.e how much standby time does it give with 3s battery pack. I am planning to use a 4s battery pack with a bms to directly give power to my raspberry pi and boost converting it to 12v to give it to my display controller. This is one approach or should I just use 4 18650 cells and a powerbank module to charge it as well and power 5v to raspberry pi 4 and 12v to display controller via dc to dc boost converter??
series cells doesn't increase capacity, they increase voltage. you need parallel cells, and the capacity is gonna be determined by the quality of your cells. want a tip? recycle cells from old batteries from laptops, not all cells on them are bad, and work just fine
Total budget Bai 💥
Koto porlo total cost eta banate vai❤khub sundor hoyeche
Такую штуку надо было собирать в деревянном корпусе. Тогда было бы супер.
My diy laptop went out fantastic
ohh u made one?
How much cost for the parts u buy ? Plz reply
What's the total cost of making this laptop???
How to make it act like a new brand computer an not like a windows or Apple?
How to charge this battery
i attach a acharging socket bro for charging
Bhai kitna paisa lagega ismein or kya kya lagega
46k inr 😂
Mom Can We Have A Laptop At Home?
Mom: we already have a laptop at home
Laptop at home:
Nice job but I would install a Linux distro such as Ubuntu or PopOS instead of Windows.
hm
@@SaptarshiSikder bro we can install it using some youtube tutorial
Can we play games and do online classes in this laptop
Ren de bhai 46k ka hai ise tu best desktop pc build kar sakta hai 😂
But tell me name of the things that you used to made this
Nice job
Better specs than my both laptop 💀
Bro lock screen of win 10 and after opening it's windows 11 how??
w10 11 r same lock screen
Never Give Up 🔥
Thanks
Voice aati hai kya laptop me
It's just assembly not you make.
The real thing comes when you make circuits too
You just fix the Resbary pi
How much ram does it have
8
How many cost
30,000 rupees
1,00,000rs
This many
🫸 🫷
Well, you're no good. @VimalaAthnere-us1bd
Approx $650.Tbh it ain't really worth it
No bms on the battery, nice bomb!
How much money did you spend in it to make this laptop mini
45000₹
Do you think i can run Serato DJ on this SBC. I cant get an answer to this question but hear it can do every thing my laptop does.
yes
bhai mere ko leptop kitne rs? me milega
Really Appreciateed your all projects 🎉. Esmai code nhi lagta kya ?
nhi bro or thnx
What are the materials needed to make this
acrylic sheet
is it cost-effective?
How much would all part coast to make it please
You should rename the title to briefcase computer
From were you brought lattepanda alpha and what it is price
prise is 30000₹
I have been so hard to work that too but thanks for toturial
So beautiful 😍
yhnx
Cooling intake and exhaust?
in future if it will be damaged so that How can we repair it by Own
yes
Bro how much GB ram and storage is there in a mini laptop
Atleast 1gb ram
Bro mini laptop ka raw materials kaha milega please batao
check description
Please the components used in creating it
check description
how will everyone charge it?
а кокой пароль ? я сделал запрашивает пароль но я не знаю никого пароля
I'll do this to my old thinkpad then...
Bro just opened the parts of the laptop and reassembled it in a new exterior design
Bro can you make videos of how to order lattepanda alpha
Price
What the price of this for making laptop pls reply pls reply what the price and which country are you from
From india
I am also from India
Proud of you
Please reply for making cost
@@sandhyapardhi4963 thnx bro lattepanda is so costly
Does it work with ryzen 9
Bro can i do study and play games on it?
Is there a way to buy this from you
how much stroage it has
can i an play minecraft onit
64 gb
I am from India 🇮🇳 ♥
Me 2🇮🇳
Kitne GB ram hai
Please show parts. Name
check description
Nice video bro i wish to God for 1m soon
Thanks
Total cost
Hy bro isme video call pe baat kar na ho to apni aavaj samane vali pass kese jaye gi
Mic use karo
Tht laptop u make is rlly awesome!!!
(I want one)
Thnx bro
@@SaptarshiSikder how many RAM do u used on tht mini laptop?
@@nickparadox2162 8gb
@@imSomebody-m4c thx
Pls tell me the full cost approximately for making this please 🥺
Lattepanda 450$, display + ctrl card ~80$, keyboard 30$ maybe, battery 10$, cables+buttons 20$.
So my guess is around 600$
Esmai keybord kq connection kayse kare ho to nhi hai bro....
bluetooth keyboard hai
Great Work Bro 😎
Thank you bro
How much was it ?
Sara parts kaise available hoga
chk description
please say how to buy this components
check description for buy link