00-06 Tahoe A/C Compressor removal from top🥶❄️❄️❄️DIY
Вставка
- Опубліковано 13 лип 2024
- Removing the A/C compressor from the top is actually pretty easy and you will save some time and effort by not removing extra parts in my opinion! This should work on the 00-06 Tahoe and Gm trucks.
Channel shirts #ad amzn.to/47aNiVR
Premium T-shirts #ad amzn.to/43SFpS1
Pullover Hoodies #ad amzn.to/3OhbqO8
00-06 Tahoe Denso A/C compressor ** With rear A/C**
#ad amzn.to/3r3FfKx
Ratchet for bottom bolts #ad amzn.to/3PC84XK
Dual ratchet set #ad amzn.to/3RkwbM6
A/C O rings #ad amzn.to/3Pk9chk
Orifice Tube #ad amzn.to/3rbVViV
00-06 Tahoe/Silverado Denso Compressor * With no rear AC* #ad amzn.to/3ZiriEU
00-06 Tahoe A/C Idea list #ad amzn.to/3OtNffu
Disclaimer: The information provided in this UA-cam channel is intended for educational and entertainment purposes only. The techniques, modifications, and suggestions demonstrated are based on personal experiences and should be performed by individuals with appropriate skills and knowledge. It is essential to prioritize safety, follow manufacturer guidelines, and comply with local laws when modifying or operating any vehicle. The creator of this channel shall not be held liable for any accidents, injuries, or damages resulting from the use or misuse of the content provided. Viewer discretion and responsibility are advised. - Авто та транспорт
Channel shirts 👕 #ad amzn.to/47aNiVR
Good work
Thanks!
Very nice
Thanks!
I just did this job on a Yukon yesterday and I feel that even with your modifications for the fans, and the air intake, it's much easier to deal with the compressor from the bottom. You didn't show the actual mounting and bolting of the new compressor but it seems to be it must be hard to hold it from the top and get the bolts lined up.
To me it was easier from the top since I didn’t have to crawl under my truck or remove my tire/fender lining. But everyone is different I understand, I didn’t show much bolting it since it was just straight forward nothing special the holes all lined up
How do you make sure it doesn't have any freon?
@@gibramperez9297 the low side has a valve stem, or they can check for you at a shop that works with A/C
Another great video, btw I notice your dashboard is still apart and I figured it a great time to ask a question. My power mirrors fuse was blown when got my truck (2000 Chevy Silverado) and changed it, but mirrors still doesn’t work. My question where are the power mirrors Relay located at, could make a quick UA-cam short showing where it is and what one it is 🙏🏾🙏🏾🙏🏾🙏🏾👀🤔
Sure I can try it out for you, I’ll take a look at them
ua-cam.com/users/shortsQX2oeMJ2Fw4?si=_5UFtTjC19E5OHuh
Question. My ac blows cold when idling but if i accelerate or drive it it makes an awful noise? Would you lean toward belt tensioner issue or ac compressor going bad?
If you’re compressor is making noise it could be a sign it’s going bad, if your belt is squealing it could be the tensioner or idler pulley
Nice my guy how much was the fans parts and all that
Thanks, my electric fans and factory relay harness I got used in a salvage yard like around 200 don’t remember exactly, it just depends where you get them from if the more expensive part is the fans
Great Job. 😊 why would my ac blow cold air and then it turns to regular warm air. Its got freon in it. But I never know when its gonna all of a sudden start blowing warm air. I'll stop and turn my truck off/on and then it may come back to cold air. Its like a hit and miss. I dont never know.. any ideas? 2004 chevy Tahoe 14:29
Thanks! I would make sure the condenser is good and clean, or the cabin filter although I believe the 04 Tahoe may not have them. Or it could be your clutch not activated on the compressor could be going bad🤔
Did you have to add pag oil for rear ac ?
No, it came prefilled
What happens if your system is full with freon? Then what do you do?
You can go to the A/C shop and they can remove it for you, after your new compressor is installed they can put a vacuum on the system and refill it, that what I usually have them do. They usually take it out and put it back in for the same 1 labor charge but you may have to ask them in your area, hope that helps!
What’s with all the movie clips
Just thought they were funny
@@MiGo713keep doing it bro, makes the videos more entertaining
@@Extendohh Thanks!