Це відео не доступне.
Перепрошуємо.
00-06 Tahoe/Yukon Custom Led Pillars⚡️🦅
Вставка
- Опубліковано 11 жов 2022
- In this video I will show how I wired up my Custom Escalade rear Pillars on my Yukon. This will work on 00-06 Tahoe, Yukon, Denali and Escalade. You will need the original rear pillars of a 02-06 Escalade to put the lights on. The lights I’m using in the video are from a supplier at the shop but if you need some you can message me on my Instagram @migo713. Other than that I will link all of the items below that I used as well as some alternative leds they just have to be rgb which is what I wired in this video. Hopefully this video will help you out wire some cool Lights on your Trucks! Let’s light these pillars up how they should have come from the factory!😎
***Also link on my Led Taillights that will fit Tahoe and Yukon with barn doors! And hatch as well! The description may say It doesn’t fit but they 💯 will fit!!
#ad amzn.to/3dqApA6
#ad amzn.to/3euQcOo
Channel shirts #ad amzn.to/47aNiVR
Premium T-shirts #ad amzn.to/43SFpS1
Pullover Hoodies #ad amzn.to/3OhbqO8
Rgb black roll #ad amzn.to/3ytVLUz
5 pin Outdoor connectors #ad amzn.to/3vpJyhM
5 wire 22 gauge wire #ad amzn.to/3CP6Sd3
Relays with harness #ad amzn.to/3RUeCyM
Electrical tape #ad amzn.to/3Mwsm1J
Outdoor Tape #ad amzn.to/3ViswOj
Braided sleeve wire loom #ad amzn.to/3yBePjQ
3m double sided tape #ad amzn.to/3CPPjto
Solder #ad amzn.to/3TgavhA
Soldering Iron #ad amzn.to/3CsrEhg
Diodes #ad amzn.to/3z8XvTw
Resistors #ad amzn.to/3CTntLC
Disclaimer: The information provided in this UA-cam channel is intended for educational and entertainment purposes only. The techniques, modifications, and suggestions demonstrated are based on personal experiences and should be performed by individuals with appropriate skills and knowledge. It is essential to prioritize safety, follow manufacturer guidelines, and comply with local laws when modifying or operating any vehicle. The creator of this channel shall not be held liable for any accidents, injuries, or damages resulting from the use or misuse of the content provided. Viewer discretion and responsibility are advised.
Send me a dm on my Instagram @migo713 if you’d like to purchase the led kit made by me👍🏼 I can make them with all of the taillights functions including the turn signals 💯 Check out My shirts if you would like to support the channel! #ad amzn.to/47aNiVR
How much for d piller light kit
@@markjonesc1 Send me a Dm on my Instagram @Migo713
Do you have another way to purchase led stripes? I don't have IG
I don’t have insta neither I need these tho!!
You could be making good money of these fsss
Hell yeah you need to get a patient and invent those.
Thanks!
I like the look of the Cadillac rear caps. But I'm not sure I would put the led strips on them . Man you really know your wiring . Sucks your not here in Vegas I would definitely go to you for a ton of upgrades.
Thanks! Yeah I feel you not everyone likes the strips but it’s not for everyone which is cool. Yeah I’ve learned a lot on wiring lol It’s so much that can be done💯 yeah if everything was close would’ve been nice😆
😁
I can say My old lady haves an 2003 Yukon SLT 4.8L I don't know many people with this model Truck but her Truck color is gold. I didn't like that color at first on your truck BC I don't know what could bring that type of color out to make it pop. But those Wheels you have really brings the color out and I Like it. And I Also like all of your Lights and creative work you have been showing viewers as well💯🙂
Oh Thanks!💯 I Appreciate that, that’s my favorite color on the Tahoe and Yukon, Pewter Metallic it always looks the same clean or dirty lol like a dirt color😁 and yes I agree they look better with the larger silver wheels and I love chrome on them. Maybe your wife would also like to customize her Yukon. I try my best to do some custom quality work that other people can do as well
Wow gotta give it you bro. Shit is tight! I thought about doing this way back when i first got my escalade pillars on my 02 tahoe but simply don't have the necessary skills for this build. All I have are countless ideas and dreams waiting to be made into a reality by engineers such as yourself.
Thanks bro I appreciate it!!💯. And I know exactly what you mean which is why I like post some of the things I do in case it helps out or even if people would want me to do something like that for them since I know not everyone is comfortable with wiring, I have some more great ideas for you guys so stay tuned🥶
@@MiGo713 Thanks for your reply . Out of curiosity where are you located?
@@tupapi818247 No problem, in Houston Tx
You should make a kit and sell them
I added 07 13 tahoe third brake light to my 01 tahoe
YOOOOO THIS IS DOPE AF!!! I definitely have to do this to mine.
Thanks!!⚡️ I agree they are a really nice upgrade🥶
Looks better then when people use them caddy light and yes I'm posting a thumbs-up
Thanks I appreciate it!! 🥶 Yeah I know not everyone is fond of the caddy style full taillights buts it’s ok
I picked up some escalade d pillar vent caps today. Going to color match em and pop em on theb02 Yukon SLE this weekend. I'm still on the fence about putting the leds. I want em for sure and seein the reverse light on it too makes me want to do it that much more. I just dont know if I want to jump into all the wire splicing. Thanks for the video. I'll be watching a few more times till I decide I'm ready to try it for myself.
I feel you💯 I make and sell them also if you just want to purchase them I got you!!🥶 And yes color matched will look good👌🏼
Thanks for the video, I liked your modification, maybe I'm encouraged to do it in my 02 cadillac escalade, it's very easy.
No Problem, Thanks as well🥶 Yeah it would look nice!
Kool mod !
Thanks!!
Sweet thank you 🙏🏼 for your dedication
Glad the video helps out and Thanks!💯
New to your channel.. Nice
Thanks and welcome to the channel!!
This goes hard def need to do this to my 05 Escalade
Thanks!!🥶
fire
Appreciate it!!💯
🔥🔥🔥
Dats dope
Thanks!!💯
Looks good very clean and well explained. How would you make the led strips work for the blinkers to. Just flash red
It’s here on part 2 💯 00-06 Tahoe /Yukon Custom Led Pillars Pt 2 Turn Signal⚡️🦅⚡️
ua-cam.com/video/IqOj3bzpkdk/v-deo.html and Thanks!!
Looks dope...
Thanks!!💯
Great video bro 👍
Appreciate it!!🥶
Nice
Appreciate it!!🥶
Wazzup my bowtie brother, I am new to the channel... I have a 2001 suburban and I will be contacting you with a lot of questions... I want to trick out my truck as well...your truck looks great 👍
Welcome to the Channel bro!🦅⚡️⚡️⚡️and Thanks!!
How much for the double stripes
SIIIIIIIIIIIICCCCCCKKKKKUHH
Hell yeah Appreciate it!!🥶
Nice video, can you share how you fit the tail lights on your barn door truck? I'm looking to find how to replace on my truck,, thanks
Thanks! 💯 Sure I’ll make a quick video on my taillights, also here’s the links on my taillight’s that will fit barn door models #ad amzn.to/3sLzVsu #ad amzn.to/3zvFAGF
How did you connect the wires to the end of the LED strip
I just soldered the new connections on them with rgb wire
Them 🔥
Appreciate that!!🥶
How long is that strip that you use to put in the pillar about how many inches
It’s 19.5” bro💯
@@MiGo713 appreciate you getting back to me so quick thanks and what does the relays actually do
@@TeamSchaeffer No problem💯 it just gives me a negative reverse signal
@@MiGo713 Okay cool so I'm going to have to try to use that I need the dios too for that function
@@TeamSchaeffer Cool, yeah you need the diodes
If you let me know how much is it to send to Miami fl that looks awesome
Thanks, you can send me a dm on my Instagram @Migo713 to purchase a set
how did u get urs to fit so snug my stick out where the side Window is at
Maybe you need to press yours more, sometimes there’s dirt or leaves that don’t let them sit all the way down
Nice custom 👌 👍🏾 👏 😉. I wish I knew how to do this for my tahoe 🫣
Thanks!!🥶💯💯💯 and I feel you lol
I also make and sell them now if you’d like to purchase a set made😎 for a simple install
@MiGo713 nice!!!! Are these built to last in cold 🥶 locations like Wisconsin 🤔?
@@NaomiBrew Thanks!! Yes I try to make them as good as possible to last, everything gets soldered and covered up with heat shrink, outdoor tape and protective mesh sleeve 🥶
@MiGo713 And of course I will be going to the stero store to have these installed. Do they come with instructions for installation(but of course its the stero store, they should know how to install??)
@@NaomiBrew I understand, and I can send you the information on the installation is very simple, I can send pictures or video how to install them on my Instagram @migo713 I’m pretty you can do it also it’s really not too bad, you just need a few tools. But yes if you take it to a stereo shop they can install it with the installation instructions since it’s a custom setup
Whats up with thoose wheels you would not survive 10 seconds in Romania
Not sure but our Houston Street’s are not nice at all lol I just swerve all the potholes and imperfections🥶
Same in the Valley out In Cali fucking hate potholes bro
@@jrmvega1645 For sure I feel you lol but its Ok I’ll be looking clean when I Swing n swerve on them potholes😎
He doesn’t live in Romania so who cares
Hell...New Orleans..
How can you hook it up to turn signals
I will work on a video for that later on👍🏼
Will it work for my 03 Tahoe? If so what year pillars would I need?
Yes, you will need 03-06 Escalade Pillars
Hell yeah
We’re gonna light them up!!🥶
I plan on doing mine using the trailer harness and without the reverse option. My question is what’s the purpose of the diodes ?
Cool! I have part 2 where we are using some of the trailer harness, and the diodes are to have separate inputs
Without the diodes the power will jump to all the lights
What kind of tail lights u have on ur build bro it’s sick a’f bad ass truck
Thanks!! Appreciate it💯 My taillights are aftermarket led here #ad amzn.to/3CGGi4N
Nice truck. I have an 03 Tahoe same color. Where did you find led Taillights for the barn door?
On nice, and thanks!💯 yeah here is the link for the Barndoor led taillights #ad amzn.to/3euQcOo
Is there any after market pillar on ebay ?
I haven’t seen any aftermarket ones made yet
Do you sell those kits for an escalade esv 2004
Yes
Mannnnn I love this, what do you charge to make them????
Thanks!!💯💯💯 Send me a dm on my Instagram @migo713
How much will you charge for something like that
I have the video with the pricing here ua-cam.com/video/CsVGQyil6no/v-deo.htmlsi=iWNgI9RRO4yE-sYL
Cool looking. I’m trying to get me set for mines just subscribe to your channel
Thanks!!💯 and Welcome to the channel!🦅.
How can I do this for a 98 Tahoe
It can be done but it’s a bit different, if I ever get a 99 to install a set I’ll be sure to make a video bro💯
Did this to my Escalade
Nice!! How do you like them🥶
@@MiGo713 I love it
@@paulhilburn553 Cool!😎 That’s good to hear
@ Paul Hilburn did you have any pictures?
I do but I dont know how to post it on here
What led are you using for the license plate , if you don’t mind drop the link
I made a bracket for it and the Leds we use at the shop they are white leds that doesn’t change color over time, I have no link for it. I could make a video showing how I did it. Or you can message me in my IG @migo713 and I can sell you the led strip or the bracket and light💯
What rear bumper is that?
It’s a Escalade rear bumper ua-cam.com/video/9EbTlV0nxvs/v-deo.html
What size wheel
26x10
Would you be able to do something like that for a 96 2 door tahoe?
Yeah that should work the same way on it, although the opening on those pillars look
Slimmer you might only need one led strip not sure how much of the light will come out
@@MiGo713 how much would you charge to do it? What’s your Instagram?
@@esepayaso13100 my Instagram is @migo713
Where’s the single cab? You still running 6’s with it bagged too??
She’s just chilling for now till I have more time to mess with her😁 No I left those rims on my Yukon Cause the the Silverado needs more positive offset to tuck so I’ll get her other wheels later for now 20s and 22s💯
What wheels are those? They noicee 🥵
Thanks!! They are Ltz Replicas ⚡️
Can u add link for dials/resistors? And will the black led strips still give u the reverse and park feature
Yeah here are the links,
Diodes #ad amzn.to/3z8XvTw
Resistors #ad amzn.to/3CTntLC
And yes the black leds will work with park and reverse too as long as they are RGB and they get wired the same like I did💯
@@MiGo713 thanks man! I've been trying to follow the steps. Do u connect just the one 12v wire to the one off the resistors
Tricky question. I'm i need which wires if any get connected to the resistor or diodes?
@@BowtieMarco No problem!💯 and yeah just take your time and you will get it step by step. The 12v on the strips get connected on the 3 diode legs with the stripe side. That turns the 1 12v input in to 3 12v inputs for 1.parking 12v
2.brake 12v and 3.reverse 12v you can pause of freeze the video where it shows how the diodes look connected.⚡️
@@BowtieMarco 3 diodes with the stripe facing the led 12v on the other ends of the diodes,
diode 1 will have 100 ohm resistor with 12v parking light wire from truck.
Diode 2 will have brake 12v from truck
Diode 3 will have reverse 12v from truck
Very nice video very informative and you seem to know what you're talking about. My only gripe is that your background music is kinda taking over your instructions. I love all of your videos and some of them the background music is more overpowering than others. I think you should stop the music when you're talking.
Thanks!! 💯 and yes I can work on that, appreciate the feedback🥶
I've got a 02 suburban and all of your mods are great!!! I plan on using a lot of them!! Keep the instruction videos coming!!! I immediately subscribed after watching the first two that I saw. I will be watching and waiting for future videos on this you can bet!!!
What are your wheels
2019 Ltz Replicas C17 26x10
I been wanting to do this to mine for the entire 2 years I've owned my Tahoe, I just didn't even know where to start 😅😅
Would you ever be interested in making a kit for sale? 🤔
I personally would buy it IMMEDIATELY for an upcharge and everything 👀
I feel you lol it can get overwhelming sometimes⚡️and yes I can make them and sell them you can reach me on my Instagram @migo713
@Migo Customs there wouldn't happen to be another way to contact ya would you? Unfortunately my Instagram got hacked 6 months ago and I just let it rot since then 🤣
Can't find anyone to get me back in lol
Got FB, Snap, email and Twitter still I believe
@@YikesInTheChat That would be the only way right now
Hey bro I’d also be interested in buying some. What’s your instagram?
@@michaelirwin7700 migo713 for his page
How much you selling them for
Send me a dm on my Instagram @migo713 for Pricing
What part of texas you at bro?
Houston
@@MiGo713 dang
@@2wdDenali why is that lol
@@MiGo713 was going to see if I could buy a setup like this from you lol
@@2wdDenali oh ok lol I mean I can ship them, you can dm me on my Instagram @migo713
Where you located bro I’ll pay you to do mine
In Houston, but I can ship them also⚡️
@@MiGo713 how long would it take I’m in Dallas I can take you my truck
@@johnnyhernandez8823 I have some ready, or depends on the features you want. But usually I can make them in a day. You can message me on my Instagram @migo713
@@MiGo713 ima dm you off my girls ig I don’t have instagram
@@johnnyhernandez8823 Ok cool💯
Wanna rap to you, Brotha
A rap song lol That sounds cool🥶
Got some questions. I want to do my pillars like urs. That's a bad ass mod with the reverse lights.
For sure Thanks! What was your question?
Sorry brottha that message was not for you my 😅 apoligies
Deleted
Oh no problem lol 💯
I NEED Those Wheels! @MiGo713
They are 2019 Ltz Replicas c17 👍🏽
@@MiGo713 what Size Are Yours? 4s or 6s?
@@josecanales-soto6701 Mines are 26x10 with a +31mm offset and I had 295/30r26 tires in front with 305/30r26 rear tires
Nice
Thanks!!💯
🔥🔥🔥🔥🔥
Thanks!!⚡️⚡️⚡️