Knife Steel Review: Böhler K390
Вставка
- Опубліковано 9 вер 2024
- Review of Böhler K390 a high wear resistance tool steel used by Spyderco on their Seki City Models.
#camping #edc #fishing #edcgear #tools #pocketknife #tactical #knife #steel #tacticallife #edclifestyle #toolsteel #steelreview #journal #review #spyderco #endura #delica #sekicity #sharp #sharpening #strop #corrosionresistance #toughness
Patreon:
/ allthingsknives
Instagram: allthingsknives_2021
Friends Of The Channel:
Notyouraverageedc
/ @ericasedc
Bumblebee EDC:
/ @bumblebeeedcyt
Outpost76:
/ @outpost_76
MyBadd Adventures:
/ @mybaddadventures144
Tom Hosang Outdoors:
/ @tomhosangoutdoors9380
Brothers of the knives:
/ headhighinc
The Shredder Knife Reviews:
/ theshredderknifereviews
BGM Knives:
/ @bgmknives3087
Mitch Bollig:
/ @mitchbollig
Knox Knife Mods
/ @knoxknifemods
Very good presentation 😊
My spydie Endela K390 wharnie has a 12k polish with a ballistol nerofor Patina, 12k right side and 1k left side dual grit edge. Vitrified resin bonded diamond stones were used in both processes. Stroped with 1micron dbk compound on each side
Been carrying a warnnie k390 endura and a native 5lw serrated maganacut lately. Also have a couple of endela’s,stretch 2 and!2 reg edge endura’s, and a police 4lw k390. Great models,especially the prices as of late. Knife center still has the warrnie endura k390 for $98. Had to get 2 👍🏻 gp knives has them on sale also. Bhq I can’t recommend because of tax and shipping 🙋♂️
Kneeves knives says K390 sharpens best at 600 grit, so does Jared at Cedric and Ada!
Sekicity m390 showed higher Rockwell at 62-63 but performance was not good in outpost76 testing. But they do great k390.
The warrnie endura k390 I’ve been carrying came with a dull edge, wouldn’t cut paper clean,Stropped it up on 6-3-1 GJ and it is sharp enough for me.
That’s weird my k390 delica was probably the best factory edge I’ve gotten. Maybe yours was made on a Friday afternoon lol.
@@lukerobbins2822 Probably 😄
Have had good luck finishing with the KME 300 then using a Venev scorpion 400g too polish the edge a bit. Then 1 um Gunny Juice.
Wow
I have seki city s30v,cruwear 20cv and k390 and hope the rest of the steels are heat treated in seki 🤷♂️
Japanese K390 is the best edc steel there is.
It’s their heat treatment, at least vs golden.
I bought a cold steel AD10
What edge bevel (dps) did you sharpen these edges at?
I’d have to run the math but around 20-18dps
Need some long Lynch clips bud👍🏻 great on seki models.imo