Dunlop Mousse Bib Install
Вставка
- Опубліковано 12 сер 2022
- Spencer went to MotoXperts to install a Dunlop mousse bib for his new desert wheel. Check out getting Dunlop mousse at www.dunlopmousse.com/
If you shop online at Rocky Mountain ATV/MC please click this affiliate link to shop in the future. There is no extra cost & it helps support our channel. Remember to click this link RM ATV/MC -DBTV Shopping each time you need to go there to shop. www.rockymountainatvmc.com/l/...
Jay Clark/Dirt Bike TV has been around the Dirt Bike industry for thirty years and is always looking to learn and help others do so as well. Give a follow or drop an email if you have any questions or comments. Thanks for watching!
Instagram: @dirtbiketv1
Facebook: / dirt.bike.tv
UA-cam: / dirtbiketv
Website: jayclarkent.com
Email: Jay@jayclarkent.com
Thanks for watching, don’t forget to share and subscribe.
#motorcycle #dirtbike #mousse #offroad - Розваги
I highly recommend two RIM locks. I use Nitro Mousse Platinum and I had my rear tire come off the rim last Sunday on an FE350. We were getting after it over some really gnarly rocky stuff and I guess she just rolled off on a rock. I made it back because the mousse held together and the single beadlock gripped the tire to allow traction. I have just ordered more rim locks need her ready for this weekend ride.
Made the install look easy!
Very nice! Thanks for the info and lesson guys!!
Good tips, appreciate it
I cut a valvestem off an old tube and stick it in hole, that way you can shoot air or take out core and shoot lube in there and covers the hole
DRP make little plugs for the holes. I got them a RMATV. They are nice. A little dab of silicone. Also, I going to try some street valves. A little puff of air helps the tire seat if it does not. Also you can you remove the core and use a syringe to inject lube. It will distribute after riding. You can also use a junk tube and cut of the valve stem. That was way easy. I do mine without a rabaconda. Want one for sure. Its all about the technique. I don't need any Clamps or fancy stuff. I have 2 irons like he has. Then three HD spoons and two bead buddies. I use the bead buddy to start. I usually do it in under ten minutes for a rear with no cussing. I want it purely for the bead breaker. After they have been on a while and several washes they are hard to break the bead.
Nice to see you do a mousse
Good job Spence!
A video showing tips for installing a tire with Tubliss vs tubes would be great! Also your opinion on Tubliss would be interesting too! Thanks.
Awesome video. I think for desert riding mousse is the way. Also best video ever
And finally, an unbiased review!
Very informative Spence, thankyou. Can i ask if you remove the standard rim tape before using the Gorilla tape or do you just tape over the top of it? Thanks.
Dosnt look too bad if you have someone else do it 🤣
You should do a video on how to bead the tire with a bib. They can be very stubborn.
Would you run these on motocross bikes
What about loading a grease gun with mousse gel and installing zerk fittings on the rim?
Converted a lock on air chuck for the grease gun to shrader valve. Only use an air chuck which works without the shrader core in so it pumps easier.
@@andrecontois8510 Nice, how many shrader valves, just the one?
Yeah just one. Same as a tube would use. Nutech says just dump the whole tube of lube and ride 15 minutes for the mouse to be evenly lubed anyway. I've been experimenting with tire soap too, but for disclaimer purposes can't really make suggestions if it distributes as well as purpose made lube.
Why didn’t you install it yourself?
Good luck ever cleaning up gorilla tape residue. Used gorilla tape once on a mountain bike wheel to run tubeless. Never again. Spent hours cleaning that shit off. So many better options
Black electrical tape works great. Not Resideo
This is a perfect example of being slow. Not hating on the guy but if this was on a enduro course they would have lapped the rider by now while his still messing trying to fit the tyre on. Dunlop do a perfect example on how to put one on without having these stands and quicker too. Put a dab of tyre paste on the inside bead. Step the mouse into the tyre job done, no need to spend $20 on moouse paste and get it everywhere 🤦🏻♂️