I found an old tube of this in the garage, must have been there years and I'm using it on my bike. It's really good stuff and well worth the money. After all the years it's been there it still works perfectly. Take care and ride safe mate.
I think if you try something which works for a very reasonably price - you are far happier than if you bought a $40 tube of the more expensive stuff and it worked no better...lol
Hi Warro, that's a huge improvement so well done and done in no time at all. I bet they'll stay in cleaner condition now as well. You are obviously enjoying using your new camera - does a great job of holding focus and zooming. Good stuff, well done fella. Dave
thanks-I will put it to the test when I fit the sump guard and point it underneath the bike...lol see how that goes. I think that will test it in lower light conditions. I had to buy a 12mm deep socket today so I could remove the exhaust pipes on the 650 to fit the sump guard -so I am now ready to go ahead with the fitting and give it a go.
inexpensive to buy too and last quite a while but better still one can notice the improvement to the said work immediately -not that much of an effort to do the polish up either. i wouldn't waste double the $$ outlay on other products when this stuff will do just fine. all the best!
Good old Autosol. Ya can't beat it! On a side note, it's also brilliant for "stropping" wood chisels to a brilliant mirror finish with a razor-sharp edge. Just get a piece of old thick leather. clamp into down a flat surface. Squeeze out a couple of dabs of Auto sole onto the leather. Then start "stropping" that chisel edge. (Sliding the chisel at the correct angle, across the leather in a brisk manner, back toward yourself)
I've had my interceptor for 6 months and have polished the cases and rocker covers at least 3 times. they seem to have blemishes on them all the time even when I get them shiny. Also, the other day noticed on the rocker covers a pitted coating, as if I had let something dry on them as in a wet polish and not buffed it off. My bike is outside all the time under a waterproof bike cover. I don't cover it up completely until the engine cools down to cold. The photo of your cover looks blemish-free even when I zoomed on it. I'm not a Mr clean and hate doing it and do my best not to have to do it .
i keep all my bikes under a veranhah but never cover them. the reason being i think it attracts condensation and other issues especially in the wet part of the year. i wouldnt say the cases are perfect but pretty good. i dont really like cleaning them myself but this polish works fine and i suppose you can give the a quick workover in 5 or 10 minutes and thats it for me
not really-bit bright on the eyes at times on a sunny day but apart from that no drama. although lookers do like to tough the chrome tank for some reason-I guess it attracts them...lol
Hi i used it for 40yrs brilliant stuff for so little effort.👍
yeah I was actually surprised. I was going to buy a well know far mote expensive brand but I thought i'd try this again after such a long break
I found an old tube of this in the garage, must have been there years and I'm using it on my bike.
It's really good stuff and well worth the money.
After all the years it's been there it still works perfectly.
Take care and ride safe mate.
I think if you try something which works for a very reasonably price - you are far happier than if you bought a $40 tube of the more expensive stuff and it worked no better...lol
Hi Warro, that's a huge improvement so well done and done in no time at all. I bet they'll stay in cleaner condition now as well. You are obviously enjoying using your new camera - does a great job of holding focus and zooming. Good stuff, well done fella. Dave
thanks-I will put it to the test when I fit the sump guard and point it underneath the bike...lol see how that goes. I think that will test it in lower light conditions. I had to buy a 12mm deep socket today so I could remove the exhaust pipes on the 650 to fit the sump guard -so I am now ready to go ahead with the fitting and give it a go.
Autosol is good stuff, i been using it since the late 70's and always have a tube in the shed.
price is right too. always good when you find some-thing which works fine and they don't overcharge you for the privilege of using it...lol
It's a superb product .....been using it since a year ......bang for buck and exceeds results even in comparo to more expensive brands
agree with that. worked fine on today's job
Really good job I used this on my interceptor but then tried other products 🤔
Now gone back to this product you done a good job on the bike 👍🇬🇧
inexpensive to buy too and last quite a while but better still one can notice the improvement to the said work immediately -not that much of an effort to do the polish up either.
i wouldn't waste double the $$ outlay on other products when this stuff will do just fine.
all the best!
Nice job Warro, I recently purchased a INT650 Baker Express and I'm enjoying watching your older videos on the 650. Timeless content for sure!
good choice of colour too. interceptor 650 is a really smooth bike to ride too unlike some of the singles...lol all the best!
@@ridewithwarro the first 400 miles have been great. I still prefer my little classic 350 Signals Edition, Ha.
@@deanomachineo7281 i've done 10,000 klm on my 350 and its a good bike. the 650 just does everything quicker
Simply Brilliant..No Pun Intended!! Great Job!! 👍👍🏁🏁
always if one has little to do but it does get a result so thats a positive...all the best!
Good old Autosol. Ya can't beat it!
On a side note, it's also brilliant for "stropping" wood chisels to a brilliant mirror finish with a razor-sharp edge. Just get a piece of old thick leather. clamp into down a flat surface. Squeeze out a couple of dabs of Auto sole onto the leather. Then start "stropping" that chisel edge. (Sliding the chisel at the correct angle, across the leather in a brisk manner, back toward yourself)
thats a pretty good tip there!
Looks good, i use the same as well as the old SILVO polish. Both work great.
Yes it does!
Cheers mate I bought 5 of them 👍👍🙏🏻
i bet you'll get a good run out of those
👍. Buy it in bulk 5 or so tubes at a time from Ebay. Will save you a fortune.
good idea
I enjoy your videos. Thank you.
Thanks for watching!
Wheel rims next👍
not a bad idea either
i use Peek metal polish far less gritty.
never heard of that brand here then again I am no polisher...lol
$10 well spent I'd say
works well-I think no need to spend more $$$'s on the big brand names when this will do as good and much cheaper too.
I've had my interceptor for 6 months and have polished the cases and rocker covers at least 3 times. they seem to have blemishes on them all the time even when I get them shiny. Also, the other day noticed on the rocker covers a pitted coating, as if I had let something dry on them as in a wet polish and not buffed it off. My bike is outside all the time under a waterproof bike cover. I don't cover it up completely until the engine cools down to cold. The photo of your cover looks blemish-free even when I zoomed on it. I'm not a Mr clean and hate doing it and do my best not to have to do it .
i keep all my bikes under a veranhah but never cover them. the reason being i think it attracts condensation and other issues especially in the wet part of the year.
i wouldnt say the cases are perfect but pretty good. i dont really like cleaning them myself but this polish works fine and i suppose you can give the a quick workover in 5 or 10 minutes and thats it for me
My girlfriend said she uses this on all my bikes.
lol very good answer there!
Funny! Mine says the same.
Which material is yellow cloth?
thats a microfibre cloth. great for polishing the metal on bikes
Is it tough to maintain chrome interceptor?
not really-bit bright on the eyes at times on a sunny day but apart from that no drama. although lookers do like to tough the chrome tank for some reason-I guess it attracts them...lol
@@ridewithwarro 😅
Take Elsterglanz from Germany. The Resultats are better!
that's - overall I think it did a pretty good job.
now get your toothbrush out and get all those bolt holes :)
lol I don't even like doing it