DIY | How to paint plastic trim on your car
Вставка
- Опубліковано 16 вер 2024
- Showing you how to paint trim on the exterior of your car! In my case, the front lip! Remember to do this in a well ventilated area and make sure to mask off any areas that could be affected from overspray. And Don’t forgot to shake the can for 2-3 minutes!!
Paint used: amzn.to/3nvzDU4
Scotch bright used: amzn.to/3A758sE
Rubbing alcohol (any will work): amzn.to/3GAtj5v
Microfiber is best used instead of paper towels, here’s some microfiber towels that will work just fine: amzn.to/3rHZHgn
This lip is for a 2004-2005 Subaru sti. It’s made by ikon Motorsports and has been my favorite lip for this car for the price and quality. Here’s the link: amzn.to/3qwoxjQ
Camera used: gopro hero 7 black amzn.to/3KjBsNW
Thanks for watching!
Homeboi just didn’t give AF about overspray on his garage floor.
Truuuueee. You can get rid of it however with some soapy water and a wire brush. Can get some degreaser to help out too if needed.
What about clear coat?
Looks good!
can I apply clear coat on top right? ...........⚠
What grit was the scotch brite?
No grit, just get the maroon color.
Is primer needed ?
Yes unless the part you are painting already has paint on it, just sand it until it’s smooth before you paint.
Drew Randall how do you check ?
How has it held up so far?
It held up great actually. The lip cracked so I threw it out but the paint was still holding up.
Shouldn’t these be blue? Lol