Stacy Pfingsten I’m impressed how it runs! I took it out and give her a little more than 4K but not much more and wow it pulls hard up to around 4.700rpm that’s the highest I wanna take it till it’s fully broke in. It gonna be a rocket of a car
James D guy yeah that added compression should definitely add some torque. You should definitely see another up tick with the addition of the cam. Also the tune will bring out loads of torque as well. I am curious to see what amount of power will be had. Good luck man.
James D guy going with the Hondata huh. I have demon Neptune and I absolutely love it. Lower price and awesome support. It also has 4 outputs as oppposed to 2.
Hi my friend... I have a question.... I want build d16y7 for turbo .. The rods I have to buy with size? Or just y7 rods? And I saw when you assembly the pistons... Isn't necessary balanced the pistons???
I have a d16y8 with p29 pistons and 210 psi compression. Do you think that with arp studs on the stock rods only support the internals ones if I increase it to 218 psi?
Hi, I got a question. Did you have to load a different base-map for running the high compression pistons? I have read something about running into detonation problems if you dont pre-tune it, resulting in damage. Would appreciate if you could share your insight on this matter
Nice video, I have a cuestion. Where can I find pistons p29 ? I have a Honda Civic d16 y7 but I would like to change the pistons p29 does the engine d16 z6 have the pistons p29? Sorry for my bad English.
I have a question , I finish rebuilding my f22b1 engine ,I crosshatch the cylinders and new rings . And then I let the warm warm up to break in , notice that their was smoking in the exhaust so when I did the compression it was 77,123,126,127...... Do I need to drive it so the compression goes up or do I need to let the car run
SI RICKO Idk honestly but you would think it would since the ratio is off. But I have heard people having 180psi as their normal on high compression and some in the lower 300s but I honestly never seen higher than 180psi on low compression pistons but I could just be wrong.
SI RICKO u try to stay away from numbers on compression gauges. There all so different. Don't trust it if it's 120 or 300. It's only to look a the difference in pressure between cylinders to make sure u have a healthy motor.
Great job. When my motor finally starts I think I'm gunna cry😂
Looks good as always .
Stacy Pfingsten I’m impressed how it runs! I took it out and give her a little more than 4K but not much more and wow it pulls hard up to around 4.700rpm that’s the highest I wanna take it till it’s fully broke in. It gonna be a rocket of a car
James D guy yeah that added compression should definitely add some torque. You should definitely see another up tick with the addition of the cam. Also the tune will bring out loads of torque as well. I am curious to see what amount of power will be had. Good luck man.
Stacy Pfingsten I can’t wait for the s300 tune and cam. It should be pretty good. Might do ITB on it as well
James D guy going with the Hondata huh. I have demon Neptune and I absolutely love it. Lower price and awesome support. It also has 4 outputs as oppposed to 2.
Valve lash
Hi my friend... I have a question.... I want build d16y7 for turbo
.. The rods I have to buy with size? Or just y7 rods? And I saw when you assembly the pistons... Isn't necessary balanced the pistons???
I have a d16y8 with p29 pistons and 210 psi compression. Do you think that with arp studs on the stock rods only support the internals ones if I increase it to 218 psi?
Mine is 230 all 4, on oem head studs, at 65lbs of tq
Hi, I got a question. Did you have to load a different base-map for running the high compression pistons? I have read something about running into detonation problems if you dont pre-tune it, resulting in damage. Would appreciate if you could share your insight on this matter
Did you use a p2j head or a p08 head
yo I'm doing a d series for high compression on a d15b is there any pointers I should know
Nice video, I have a cuestion. Where can I find pistons p29 ? I have a Honda Civic d16 y7 but I would like to change the pistons p29 does the engine d16 z6 have the pistons p29? Sorry for my bad English.
CAESAR VILLALTA eBay sells p29 pistons.
CAESAR VILLALTA The d16A9 or d16a1 I can’t remember but one of them has the p29 pistons oem
@@JamesDguy thank you my friend, I will try to buy for ebay keep going with yours beautiful videos.
Loving your progress so far.
I have a question , I finish rebuilding my f22b1 engine ,I crosshatch the cylinders and new rings . And then I let the warm warm up to break in , notice that their was smoking in the exhaust so when I did the compression it was 77,123,126,127......
Do I need to drive it so the compression goes up or do I need to let the car run
Sounds amazing
J if I have A super low compression setup will my compression read different from A high compression setup in A compression test ?
SI RICKO Idk honestly but you would think it would since the ratio is off. But I have heard people having 180psi as their normal on high compression and some in the lower 300s but I honestly never seen higher than 180psi on low compression pistons but I could just be wrong.
James D guy oh ok just asking cause I just did a compression test dry read 90 then wet read 130 all 4
SI RICKO probably normal I’m not sure though
lol
SI RICKO u try to stay away from numbers on compression gauges. There all so different. Don't trust it if it's 120 or 300. It's only to look a the difference in pressure between cylinders to make sure u have a healthy motor.
holy valve lash
Looks sweet!
Looking good man
BRO WHAT SIZE OF THROTLLE BODY ARE YOU USING?
Jhovee Ello I was using 70mm skunk2 I have sold this car months ago
All motor fam 👌
Nice build, just did one myself! Was yours rowdy, did you notice the increase in power
That shitty ass oil
Nice!! Sounds really nice, I recently did a p29 d16 my self. Check out my vids. I have them posted.
Veritas Aequitas very nice will do!!
@@JamesDguy what psi dose it run now with p29 in
😨😨😒😒😭😭😷😷👎👎👀👀👀👀👀👀👀 omg that's not how you do it smdh.😨