The calibration method has also evolved considerably. It's very convenient to have a small touch panel monitor for setting. Moreover, it even acts as a sub monitor for the camera. Gimbal of this time of Zhiyun was really evolved!
Best Zhiyun channel ever. Josh, you've always known how to do it. Thank you. Btw...do u still work with Mike o hearn? You used to make a lot of great content for him
Great instruction video as always mate. Wish I have watched this before I went out for a test shoot earlier today. My shots probably would have been even smoother 😆
@@MomentumProductions1992 can’t wait!!! Question do the older image transmission work on the Weebill 2???? Really want to make good use of the little monitor.
Hi thanks for the tutorials. I have a Sony a7III, I can't see the images on the weebill display. Could you tell me the parameters to set in the Sony menu? You would be really nice, thank you.
Hello, they make great videos. I've learned a lot. Can you make a video about timelapses-motionlapse, panorama and V mode? Best regards from Bavaria Germany Dieter
I'm literally filming a wedding tomorrow. I use the a7SIII & my Zhiyun Weebil 2 just came in today. This video is a lifesaver. For real. Thank you man 🙏 Just curious, should I change any of the settings based on my gear? Sony a7sIII with Sony G Master 35mm 1.4 which is 1.55 lbs in total
@@MomentumProductions1992 Hey man so I had the wedding today. Everything was going smooth. But at some parts in the day the gimbal would start shaking/vibrating a lot to the point where I couldn’t use it. Especially when I grabbed the back handle. How can I fix this?
Hey Josh I’m having trouble getting good results with my weebill 2. I’ve tried your settings and my camera is properly balanced. It’s strange but I get far better results with my first gen zhiyun crane I have recently updated the firmware on the gimbal and there is no improvement. It’s behaving like it’s smooth when I first start moving but any change indirection and it’s like there is no dead band and it moves really fast. It’s like as soon as I change direction it ignores the settings I’ve put in
We have this exact same issue. We quit using it until we can get a resolution to this. Coming from the Weebill-s and Crane 2 which are like butter, this thing sucks.
@@MontotoProductions I have sent mine back to zhiyun for repairs. It took a lot of back and forth to get to this point and I had to pay shipping to send it back but I will update you once they find out what as causing it
I am having the exact sma issues. When I try to hold it still it wobbles with my no matter how still I am. When I turn It abruptly begins the movement then smooths out throughout the movement. ALL MY FIITAGE HAS A ROLL WOBBLE, BAD.
I tried your settings and my gimble is perfectly balanced but it’s not smooth as I wish 😕 I see a little shake ( my own steps ) on my footage. I saw videos where people were running with Weebill 2 and footage was very smooth . Don’t know how to solve this problem I will be grateful for your help 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
Question, please, when you connect the camera, the camera screen turns off and only the gimbal screen remains on. What is the required setting for the camera? Thank you. Camera type: Sony 6600
im using a6400 and zeis 35mm 1.4, auto calibrate make the webill 2 vibrate and i customize the motor setting : pan - 15, roll -20, tilt -25. now problem solved.
Hello When I balance my gimbal, it starts shaking. I am sure that it is balanced, but the gimbal still shakes.(model: wibble 2 combo- camera: sony zve10 lenz: 50mm f1.8) please help me:(
Thanks for your thorough video on the Weebil 2. So I've updated the firmware for both my Sony FX3 and the Weebil 2 (v1.84). I've tried connecting the camera to the gimbal many times to no avail. It keeps saying "check connected device" and I'm using the USB-C to USB-C cable. What's weird is that on the Weebil Lab and the Weebil 2s there is an option to choose which camera you'll be connecting to (Canon, Sony, Panasonic, etc) but on the Weebil 2 menu screen there is nothing that I can find of that sort. If you have a solution, that would be greatly appreciated because I would love to control my camera from the gimbal handle itself the way you have mentioned it here. Thank you in advance! Best, Julius
This was really helpful, gave me the best settings for a big shoot I had the other day which I nailed as a result. Many thanks!!
Thanks so much! I am super glad this helped :)
The calibration method has also evolved considerably.
It's very convenient to have a small touch panel monitor for setting. Moreover, it even acts as a sub monitor for the camera.
Gimbal of this time of Zhiyun was really evolved!
Best Zhiyun channel ever. Josh, you've always known how to do it. Thank you. Btw...do u still work with Mike o hearn? You used to make a lot of great content for him
Thank you… I just applied the same settings and the gimbal is super smooth.
Glad it helped!
can you show how you connected to your camera
Great instruction video as always mate. Wish I have watched this before I went out for a test shoot earlier today. My shots probably would have been even smoother 😆
This is an awesome tutorial, I have mine coming in a few days so I will be following these instructions.
Hope you enjoy it!
@@MomentumProductions1992 can’t wait!!! Question do the older image transmission work on the Weebill 2???? Really want to make good use of the little monitor.
plz make a video on the settings of Weebill & Canon 6d Mark 2 . especially focus following and focus lock functions.
we need a video on balancing the weebill 2 ASAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Very nice, please inform which or how watt charger we can use to charge this gimbal, please reply
You may try PD fast charger 24W(15V/1/6A).
With a A7iii, 24 1.4, ND var filter and small mic, after autocalibration i get motor settings into the 70+
Can we start and stop recording from the gimbal button? On weebill 2
Hi thanks for the tutorials. I have a Sony a7III, I can't see the images on the weebill display. Could you tell me the parameters to set in the Sony menu? You would be really nice, thank you.
It need to work with the AI transmitter, set PC remote on the sony menu.
Hello,
they make great videos. I've learned a lot.
Can you make a video about timelapses-motionlapse, panorama and V mode?
Best regards from Bavaria Germany Dieter
Can zhiyun weebill 2 and Sony A7c connect?
me sirvio mucho. me quito vibracion que no entendia porque pasaba. gracias. thank you!!!
I'm literally filming a wedding tomorrow. I use the a7SIII & my Zhiyun Weebil 2 just came in today. This video is a lifesaver. For real. Thank you man 🙏 Just curious, should I change any of the settings based on my gear? Sony a7sIII with Sony G Master 35mm 1.4 which is 1.55 lbs in total
Hey man! I would recommend to give your tilt and roll motor slightly more power. Probably 3-5 more and that should be fine :)
@@MomentumProductions1992 thank you so much! you’re the man
@@MomentumProductions1992 Hey man so I had the wedding today. Everything was going smooth. But at some parts in the day the gimbal would start shaking/vibrating a lot to the point where I couldn’t use it. Especially when I grabbed the back handle. How can I fix this?
@@BoyBlessing Can you DM me a video on Instagram? it could be multiple things. @momentum_productions
@@MomentumProductions1992 yea for sure I got you thank you
Hey Josh I’m having trouble getting good results with my weebill 2. I’ve tried your settings and my camera is properly balanced. It’s strange but I get far better results with my first gen zhiyun crane
I have recently updated the firmware on the gimbal and there is no improvement.
It’s behaving like it’s smooth when I first start moving but any change indirection and it’s like there is no dead band and it moves really fast. It’s like as soon as I change direction it ignores the settings I’ve put in
We have this exact same issue. We quit using it until we can get a resolution to this. Coming from the Weebill-s and Crane 2 which are like butter, this thing sucks.
@@MontotoProductions I have sent mine back to zhiyun for repairs. It took a lot of back and forth to get to this point and I had to pay shipping to send it back but I will update you once they find out what as causing it
@@JMMedia thank you, let me know and I will send ours too.
Same issue, the pan is not smooth at all, deadband settings are not reacting to adjustments.
I am having the exact sma issues. When I try to hold it still it wobbles with my no matter how still I am. When I turn It abruptly begins the movement then smooths out throughout the movement. ALL MY FIITAGE HAS A ROLL WOBBLE, BAD.
I'm using a nikon z6ii and a sigma 24-70mm lens. Is this settings great for my weebill 2 gimbal?
yes:)
Ok please help me
Weeble 2, dji rs 3 mini or the dji rsc 2???
hi, i balanced the camera perfectly. but unfortunately she always swivels in lock (L) mode. .What could be the reason?
Friend, I have the weebill 2 and my movements are abrupt, is that configuration that you showed the ideal? Thank you
I tried your settings and my gimble is perfectly balanced but it’s not smooth as I wish 😕 I see a little shake ( my own steps ) on my footage. I saw videos where people were running with Weebill 2 and footage was very smooth . Don’t know how to solve this problem
I will be grateful for your help 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
Question, please, when you connect the camera, the camera screen turns off and only the gimbal screen remains on. What is the required setting for the camera? Thank you. Camera type: Sony 6600
Select "PC Remote" for your camera's "USB Connection".
im using a6400 and zeis 35mm 1.4, auto calibrate make the webill 2 vibrate and i customize the motor setting : pan - 15, roll -20, tilt -25. now problem solved.
Hello
When I balance my gimbal, it starts shaking. I am sure that it is balanced, but the gimbal still shakes.(model: wibble 2 combo- camera: sony zve10 lenz: 50mm f1.8)
please help me:(
Hi, did you manage to solve your problem? I have vibrations on my weebiil 2 after firmware update
Thanks for your thorough video on the Weebil 2. So I've updated the firmware for both my Sony FX3 and the Weebil 2 (v1.84). I've tried connecting the camera to the gimbal many times to no avail. It keeps saying "check connected device" and I'm using the USB-C to USB-C cable. What's weird is that on the Weebil Lab and the Weebil 2s there is an option to choose which camera you'll be connecting to (Canon, Sony, Panasonic, etc) but on the Weebil 2 menu screen there is nothing that I can find of that sort. If you have a solution, that would be greatly appreciated because I would love to control my camera from the gimbal handle itself the way you have mentioned it here. Thank you in advance! Best, Julius
These is a camera manufacturer setting in the phone app. Not sure why they don't have it on the flip out screen also.
Quick question. Probably a stupid one. I copied all your settings. My question is… will it change when i do auto calibration?