Oh! Maybe those two leaves withered because they were touching the (duh duh duuuh) _skull_ . 😱 So spooky! Hahaha!!! That enclosure looks great already- can't wait to see it all grown in!
The soil sticks that well because of a very high clay content. I see minimal cracking so it’s a non-shrink/swelling clay mineral(1:1). Clays that shrink and swell will probably just fall off. To test you can just wet your soil and message it (It seems my English is running out) a bit. Then just let it dry. If you see giant cracks it probably won’t work. The clay on our farm here in South Africa even has a self mulching effect where the soil mixes itself because of the swelling and shrinking.
I like the cork background, they leave a lot of space and some color in the back. Your backgrounds give me so many ideas on what to do when my Ts are a bit larger.
With the enclosures that have warped plastic parts you could try to carefully heat up the plastic with a hairdryer, and then bend them back into shape.
I've been watching your channel for a bit now. However, a week ago I tested positive for Covid and I have to say, I've been binge watching your videos the whole time I've been laying here and you're pretty much the only thing that's kept me entertained. I appreciate you and all your hard work!!
Put the warped plastic parts in boiling water for 15 or 20 seconds. remove using tweezers, place on the glass edge. Fix it in place until coole, using adhesive tape. Once cooled and in proper shape, glue them in place with your preferred glue (silicone rubber, hot glue, superglue...)
Thank you Petko, i have been watching and subcribed to from the beginning. When you didn't have as many tarantula's as you definitely do now. And were just filming from your apartment. Love your new Dark Den place, its awesome! I have definitely learnt an awful lot on the husbandry and care of looking after and keeping tarantula's. I have seven, and am a waiting for a whip tail scorpion to arrive soon. Im from London, uk. Please continue with Dark Den, as i love to watch all your videos, I've learnt an awful lot. Thank you. 🕷️🕸️✌🏾❤️😊🤗💜🙏🏾
That’s one Apoplectic Scorpion there! Talk about high blood pressure 😆 Also I was watching a FLITE TEST video about a heavy duty PLA for printers that might be useful for your enclosures! Might be worth looking into.
Lovely length of video. Makes waiting less painful. Thank you. Enjoyed😊 about warped plastic: can you hit it with a bit of heat to bend it back into shape? Might be easier than replacing. Although you've done it already. But maybe for the future?
I was thinking: to fix your heat-warped enclosures, instead of gluing the hinge-plates to the door first, could you glue them in situ? By that I mean: -step 1: place the bottom hinge plate onto the enclosure in the closed position -step 2: apply a bead of adhesive onto the hinge-plate, a little heavier towards the far-end and lighter or none at all near the hinge -step 3:apply adhesive to the top of your door panel, heavier on the side that will face the hinge -step 4: insert the top hinge-plate into the top hinge [no adhesive] -step 5: while holding the top hinge in place, slide the door panel in between the hinge-plates -step 6: clean any glue over-spill and let cure The excess glue on the top and bottom where the door panel will slide into the hinge-plates should drag the glue with it into the join. To visualize it a little better, it would be like feeding an oven-rack or ikea drawer... sideways. You may need your wife's help as a 3rd hand to hold the top plate while feeding the door panel, or you could use masking tape to temporarily hold the hinge-plates and put the enclosure on its side, so you can feed the panel top-town
@@rsukut5866 I have been given too many bad instructions to willingly give bad ones, especially with a potential language barrier, Yes Petko's spoken English is good, but i don't know if he can think in English [while working] or has to translate on the fly.
All of your hard work is definitely paying off. The wall is almost completely covered. Very impressive 😁👍. It definitely motivates me to get started. Thank you so very much for sharing. You may not thank so but the crafting of the wall would be of great importance to me. As I said, thanks, you are awesome!😎
Petko, I have to admit you do got some really good spiders they're really really nice to look at with the colorations.. I enjoy a lot of your videos this one was really good as well thank you very much hope we get another one really soon and I hope everything is well with the baby and all on its way?? 👍💯😊
Bro!! Dig the longer videos! Great rehouse vid! You are the best at handling your T’s. We just picked up a Venezuelan Sun Tiger. she is a tiny sling and we are very excited about “it” growing. Thanks for sharing each week! ✌️❤️🤘
I always like your enclosures especially with the sprinkle of sand! The Dark Den??? Not sure which number Dark Den is now, I like this one the best! I love the skate park in the corner of your garden you are going to be an awesome Dad, I don’t think your children will get bored with you, I hope everything is going well for Your wife and the sickness stage is passed. 🌟🌟🌟
Was that a hint about possibly moving into enclosure kit production? Or just a tease? 😉 Gotta say, though, imo every T is beautiful in their own way- even the "plain" brown ones have details that will catch the eye if you look closely enough. I enjoyed seeing each of your Ts today. Thanks! Cheers!
Absolutely agree, I did not think of it as plain looking, but i get his point. But, everybody has a different taste, maybe it's a little dull to him, it isn't to me though.
@@gazepskotzs4 Yes, you're right, everyone's preferences differ. That's why I made sure to put "imo" ("in my opinion") because I don't want to say anyone is wrong for liking the flashier Ts more- they _are_ incredibly beautiful. I guess I just like to advocate for the underdogs. Lol At first glance simple brown Ts can certainly seem dull, but hopefully people who write them off as boring will look a little closer. They might still think they're plain, of course. Haha! Nice to hear I'm not alone in thinking they're _not_ dull, though! 😄
@@TheDarkDen Ah, I see. That's an annoying position to be in... 😐 Well, maybe (hopefully!) an opportunity will present itself, so you can move forward with your plans. You're located in a great area for selling enclosures (or kits) since many of the nicest ones available either don't ship from the USA, or cost a fortune to do so. Plus your design looks really great! Good luck!! 😊
Herb from Canada here hahaha...Your videos rule dude !!! .... My Chilobrachys electric blue (the creep crawler ) is my only Asian tarantula so far ... maybe one molt smaller then yours and was so so so chill when I rehoused it ... I had a second person with me and was prepared for a similar reaction as yours but it was so calm and peaceful hahaha .... anyways thanks for the wicked content and Tarantula disclousers makes choosing new ones alot easier :-)
You must be so satisfied of what you have built. Your Dark Den is a masterpiece and you show so much love to all your animals💚💚🕷🦂🦎🐹🐈🦀. Hope I didnt leave anyone out lol.
I believe that you should make the cages as simple as you can, you have to clean them. The dirt, sand and plants always look great. I love your videos and I'm scared to death of spiders. 🕷🕷🕸🕸
Maybe you should try and find bamboo plants or get bamboo for the backgrounds of your enclosures, it'll help add some green and I dont think it'll be heavy
I haven't wanted to keep tarantulas, but if I did... substrate, hide, sand for texture, leaf litter... I think I'm going to be hearing you say that in my sleep :D hehehe :D
Petco that Potos plant likes more water , you could bury it planted in a plastic pot, that way you do not have to soak the ground of the enclosure, also maybe it's much warmer above, they hate that. But just an idea, you should use Peperomia houseplants for enclosures, they are non poisonous, sturdy and neat, also it is important that Peperomia species need very little light(and are known to grow very well in artificial light, even simple fluorescent tube wil do), Potos needs a lot more light for it to grow healthy looking leafs . The thicker leafed ones can be kept in dryer and thin leafed ones in more moist enclosures. They are more sturdy than Potos and being a bit smaller i think they fit nicer. Also they come in lots of variaties!
I never knew scorpions would do threat lunges; that was really cool! I've only ever seen them try to run away, or just hold their ground and not move at all. This little one has an attitude!
if you dont have already, take a heatgun and heat the plastic. it will bend back. maybe you have to give some weight on top but it will work and you still can use all the parts.
Was bitten on my heel a couple of weeks ago by a unknown spider from alberta Canada its was pretty bad i thought I was going to lose my foot it still hasn't completely healed... spiders scare me now 😬
Awesome Tarantulas! I really love Chilobrachys sp. Electric blues! Hopefully I'll get some soon.. I've been using dirt background enclosures aswell!! They look extra naturalistic 🤓
Really enjoyed that,,getting your clay type substrate was fun,,and the sun on the enclosures what a nightmare,,,anyway you got it all sorted,,Brilliant 🏴🇬🇧👍👍
Great video Petko! I can't wait to see if your Pseudhapalopus sp. blue burrows a lot. Mine is a little bulldozer and has a few different tunnels running through its enclosure.
Here is a dumb question. Is there a group of breeders / collectors that you can call upon to find a mate for one of your animals? Call it Spider Tinder....
Hi Petko, was this by purpose that the C. sp. electric blue get no plants? I have also one and it’s a small sling and I have to rehouse her soon. Currently she has plants. And I think the name of the stones you’ve used is in English slate, shale or schist. In german it’s called “Schiefer” and the next time I build up a new enclosure I will use them too 😋 we have a lot of clay in our dirt as well here in south Germany so I will also try to copy your background style 😜 it’s really pretty!
I had an idea about the design of the hinge that keeps breaking. Make a full frame for the glass, not just clip on pieces. On the hinge side make the frame thicker with a hollow down the middle for metal rod to fit and act as the poles for the hinge to work.
Every time my school friend starts wiggling its tail and legs it starts shedding I was going to say if you pre-cut the hide and back it up to the end of the glass and then put dirt inside of it you can see where they're hiding out at because the dig the dirt out and then you can see them through the glass you can even put up piece of red plastic then you can always check them when they're in their hide
Always a pleasure to watch your videos. I don't keep any spiders as pets although I have caught, observed and photographed some jumping spiders, (so cute and curious they are). I'm moving to Arkansas, USA soon and they have Tarantulas there. I'm pretty excited to observe those. I may have to start an Instagram account so I can share some pictures of them with you.
Petko, all you need is enough clay sediment in your substrate to be able to sculpt anything your mind can inspire... Also I've found that micro mesh helps any kind of 'dirt' to stick and hold shape... Just a thought mate... P.s, love your work
That scorpion is quite feisty Absolutely LOVED IT!!!! so much fun to watch ,,, Great video I do truly hope that you will go back to 2 x a week sometime in the near future... I miss seeing the double take and it feels to long in between but ok that was my 2 cents.... Love all that you do !!!!!
Ive never tried to fix an enclosure thats been bent by heat but I have had success with other things by repairing them with my heat gun I use for crafting. Just a thought if you ever have something like this happen again
![[ALL JOBS] The Ultimate PvP Combo Guide (with tips!)](http://i.ytimg.com/vi/BW6s_KxIYz4/mqdefault.jpg)
Blue is one of the colours Tarantulas can actually see. So the fact the underside of the legs are blue probably also helps during mating displays.
That scorpion looks like it woke up on the wrong side of the enclosure...
Quite a mood
Nothing gets past the eagle eyes of the supreme leader 🤣
That scorpion is one feeding away from a walmart scooter.
Lemme kiss ya bro.
XD
Oh! Maybe those two leaves withered because they were touching the (duh duh duuuh) _skull_ . 😱 So spooky! Hahaha!!! That enclosure looks great already- can't wait to see it all grown in!
Your dirt must have a large percentage of clay like material in it, for how well it packs and holds it shape like that.
Nah, the dirt is just a paid actor
@@Matt-su8yl 🤣
True, i wanted to add to use cheap clay from a hobby shop, i dig up white clay near a river here, easy to find!
Look at the battle scars of that straw!
Thank you for pushing through the trials and tribulations. Because this is a fun video!
The soil sticks that well because of a very high clay content. I see minimal cracking so it’s a non-shrink/swelling clay mineral(1:1). Clays that shrink and swell will probably just fall off. To test you can just wet your soil and message it (It seems my English is running out) a bit. Then just let it dry. If you see giant cracks it probably won’t work. The clay on our farm here in South Africa even has a self mulching effect where the soil mixes itself because of the swelling and shrinking.
21:59 I'm digging that Metallica communal. 😎 especially the way you incorporated the not plastic skull into the enclosure.
I like the cork background, they leave a lot of space and some color in the back. Your backgrounds give me so many ideas on what to do when my Ts are a bit larger.
Maybe you can use a heatgun or a hairdryer to remove the glued pla plastics
With the enclosures that have warped plastic parts you could try to carefully heat up the plastic with a hairdryer, and then bend them back into shape.
looks like your soil has high clay content!
Exactly
I've been watching your channel for a bit now. However, a week ago I tested positive for Covid and I have to say, I've been binge watching your videos the whole time I've been laying here and you're pretty much the only thing that's kept me entertained. I appreciate you and all your hard work!!
I love Mondays just for new videos from Petko.
The scorpion is a baby?! Whoa!
Dude that half pipe is sickkk! Wish I had a big enough garden to have a mini ramp.
Put the warped plastic parts in boiling water for 15 or 20 seconds. remove using tweezers, place on the glass edge. Fix it in place until coole, using adhesive tape. Once cooled and in proper shape, glue them in place with your preferred glue (silicone rubber, hot glue, superglue...)
Hello great video update and rehousing
Thank you Petko, i have been watching and subcribed to from the beginning. When you didn't have as many tarantula's as you definitely do now. And were just filming from your apartment. Love your new Dark Den place, its awesome! I have definitely learnt an awful lot on the husbandry and care of looking after and keeping tarantula's. I have seven, and am a waiting for a whip tail scorpion to arrive soon.
Im from London, uk. Please continue with Dark Den, as i love to watch all your videos, I've learnt an awful lot. Thank you. 🕷️🕸️✌🏾❤️😊🤗💜🙏🏾
That’s one Apoplectic Scorpion there! Talk about high blood pressure 😆
Also I was watching a FLITE TEST video about a heavy duty PLA for printers that might be useful for your enclosures! Might be worth looking into.
Lovely length of video. Makes waiting less painful. Thank you. Enjoyed😊 about warped plastic: can you hit it with a bit of heat to bend it back into shape? Might be easier than replacing. Although you've done it already. But maybe for the future?
I was thinking: to fix your heat-warped enclosures, instead of gluing the hinge-plates to the door first, could you glue them in situ?
By that I mean:
-step 1: place the bottom hinge plate onto the enclosure in the closed position
-step 2: apply a bead of adhesive onto the hinge-plate, a little heavier towards the far-end and lighter or none at all near the hinge
-step 3:apply adhesive to the top of your door panel, heavier on the side that will face the hinge
-step 4: insert the top hinge-plate into the top hinge [no adhesive]
-step 5: while holding the top hinge in place, slide the door panel in between the hinge-plates
-step 6: clean any glue over-spill and let cure
The excess glue on the top and bottom where the door panel will slide into the hinge-plates should drag the glue with it into the join.
To visualize it a little better, it would be like feeding an oven-rack or ikea drawer... sideways.
You may need your wife's help as a 3rd hand to hold the top plate while feeding the door panel, or you could use masking tape to temporarily hold the hinge-plates and put the enclosure on its side, so you can feed the panel top-town
This is super clever! I love how you included really simple-to-follow instructions.
@@rsukut5866 I have been given too many bad instructions to willingly give bad ones, especially with a potential language barrier, Yes Petko's spoken English is good, but i don't know if he can think in English [while working] or has to translate on the fly.
Or just take a new one.
Probably the key to your dirt's success is the amount of clay in it :)
Could you imagine all these enclosures in your old apartment?? Lol. Loved the rehouses. Great job!!! Tyfs God bless you
All of your hard work is definitely paying off. The wall is almost completely covered. Very impressive 😁👍. It
definitely motivates me to get started. Thank you so very much for sharing. You may not thank so but the crafting of the wall would be of great importance to me. As I said, thanks, you are awesome!😎
All spiders are special! 🥺 Poor lil spood. X
Petko, I have to admit you do got some really good spiders they're really really nice to look at with the colorations.. I enjoy a lot of your videos this one was really good as well thank you very much hope we get another one really soon and I hope everything is well with the baby and all on its way?? 👍💯😊
So cool to see how far you've come since Dark Den 1. Keep up the great work!
Bro!! Dig the longer videos! Great rehouse vid! You are the best at handling your T’s. We just picked up a Venezuelan Sun Tiger. she is a tiny sling and we are very excited about “it” growing.
Thanks for sharing each week! ✌️❤️🤘
I always like your enclosures especially with the sprinkle of sand! The Dark Den??? Not sure which number Dark Den is now, I like this one the best!
I love the skate park in the corner of your garden you are going to be an awesome Dad, I don’t think your children will get bored with you, I hope everything is going well for Your wife and the sickness stage is passed. 🌟🌟🌟
Was that a hint about possibly moving into enclosure kit production? Or just a tease? 😉
Gotta say, though, imo every T is beautiful in their own way- even the "plain" brown ones have details that will catch the eye if you look closely enough. I enjoyed seeing each of your Ts today. Thanks! Cheers!
Absolutely agree, I did not think of it as plain looking, but i get his point. But, everybody has a different taste, maybe it's a little dull to him, it isn't to me though.
@@gazepskotzs4 Yes, you're right, everyone's preferences differ. That's why I made sure to put "imo" ("in my opinion") because I don't want to say anyone is wrong for liking the flashier Ts more- they _are_ incredibly beautiful.
I guess I just like to advocate for the underdogs. Lol At first glance simple brown Ts can certainly seem dull, but hopefully people who write them off as boring will look a little closer. They might still think they're plain, of course. Haha!
Nice to hear I'm not alone in thinking they're _not_ dull, though! 😄
I want to move into enclosure production for a long time, just don't have the time to focus on it :D
@@TheDarkDen Ah, I see. That's an annoying position to be in... 😐 Well, maybe (hopefully!) an opportunity will present itself, so you can move forward with your plans. You're located in a great area for selling enclosures (or kits) since many of the nicest ones available either don't ship from the USA, or cost a fortune to do so. Plus your design looks really great! Good luck!! 😊
Herb from Canada here hahaha...Your videos rule dude !!! .... My Chilobrachys electric blue (the creep crawler ) is my only Asian tarantula so far ... maybe one molt smaller then yours and was so so so chill when I rehoused it ... I had a second person with me and was prepared for a similar reaction as yours but it was so calm and peaceful hahaha .... anyways thanks for the wicked content and Tarantula disclousers makes choosing new ones alot easier :-)
If there was ever an arachnid fashion show, blue tarantulas like Electric Blue would steal the show. That color looks so good on a tarantula
Its only blue on the front legs though.everything else is beige and doesn't go well with the blue
13:30 on , that male spider has beautiful color markings..
For you door parts you should look into getting them mad by a plastic injection molding company.
Nice Sand for the Texture 😊
Glad to see the sand back.great looking tanks with stunning spiders and feisty scorpion
Thank you petko for your vids. They always get me smiling and entertained. I also learn stuff. Thank you man.
I really like how handy dandy Petko is with the enclosures and shelving. It's great. 🙂
Spider Dad
Spider Dad
Rad Croatian spider dad
Sees the bugs, gives em hugs
Raises them with care and love
Look out!
Here comes the spider dad.
We have sticky clay soil in the UK be useful back ground
You must be so satisfied of what you have built. Your Dark Den is a masterpiece and you show so much love to all your animals💚💚🕷🦂🦎🐹🐈🦀. Hope I didnt leave anyone out lol.
Petko Hawk had a vert in the back yard. hell yeah
4:47 use some heater to give their shape back, not burn them! but just a little heat and everything will be fine. @TheDarkDen
Those are some great creatures.
I believe that you should make the cages as simple as you can, you have to clean them. The dirt, sand and plants always look great. I love your videos and I'm scared to death of spiders. 🕷🕷🕸🕸
Maybe you should try and find bamboo plants or get bamboo for the backgrounds of your enclosures, it'll help add some green and I dont think it'll be heavy
Last spider and enclosure were my favorite!
I haven't wanted to keep tarantulas, but if I did... substrate, hide, sand for texture, leaf litter... I think I'm going to be hearing you say that in my sleep :D hehehe :D
I hate spiders n bugs..but I keep coming back for more😉
Petco that Potos plant likes more water , you could bury it planted in a plastic pot, that way you do not have to soak the ground of the enclosure, also maybe it's much warmer above, they hate that.
But just an idea, you should use Peperomia houseplants for enclosures, they are non poisonous, sturdy and neat, also it is important that Peperomia species need very little light(and are known to grow very well in artificial light, even simple fluorescent tube wil do), Potos needs a lot more light for it to grow healthy looking leafs . The thicker leafed ones can be kept in dryer and thin leafed ones in more moist enclosures. They are more sturdy than Potos and being a bit smaller i think they fit nicer.
Also they come in lots of variaties!
Very leggy boys striking at incredibly high speed
Petko, I believe you were referring to plastic injection molding. Love the rehousing and feeding vids. Can't wait until the monitor arrives.
I never knew scorpions would do threat lunges; that was really cool! I've only ever seen them try to run away, or just hold their ground and not move at all. This little one has an attitude!
Regarding the soil; yeah, you've got clay. I'd _never_ be able to use the sandy soil where I live they way you have.
if you dont have already, take a heatgun and heat the plastic. it will bend back. maybe you have to give some weight on top but it will work and you still can use all the parts.
I hope u ok dude and its not covid? Hope u get better soon
XD that was adorable that little scorpion was all ready to throw tiny pinchers
Was bitten on my heel a couple of weeks ago by a unknown spider from alberta Canada its was pretty bad i thought I was going to lose my foot it still hasn't completely healed... spiders scare me now 😬
Awesome Tarantulas! I really love Chilobrachys sp. Electric blues! Hopefully I'll get some soon.. I've been using dirt background enclosures aswell!! They look extra naturalistic 🤓
Really enjoyed that,,getting your clay type substrate was fun,,and the sun on the enclosures what a nightmare,,,anyway you got it all sorted,,Brilliant 🏴🇬🇧👍👍
Hey Petko!!! How you doing? ^^
Maaan, you need to make the "SAND FOR THE TEXTURE" shirt!!!
9:15 the way you cut the video it looked like you just dumped the tarantula in there lol
"This is something I fully expected from this species which is why I will let him keep the straw."
Great video Petko! I can't wait to see if your Pseudhapalopus sp. blue burrows a lot. Mine is a little bulldozer and has a few different tunnels running through its enclosure.
Here is a dumb question. Is there a group of breeders / collectors that you can call upon to find a mate for one of your animals? Call it Spider Tinder....
There's a group on Facebook that serves this exact purpose, it's called Spinder 😂😂
That's first scorpion was a baby wow!
You might not like chasing the tarantulas about .... but we the viewer love to watch it ;) xx love your channel as always xx
Thanks for the video petko. It was great as always. 😁
Hi Dark Den, hi everyone, " nice enclosures,
Happy tarantulas now", :)
Hi Petko, was this by purpose that the C. sp. electric blue get no plants? I have also one and it’s a small sling and I have to rehouse her soon. Currently she has plants. And I think the name of the stones you’ve used is in English slate, shale or schist. In german it’s called “Schiefer” and the next time I build up a new enclosure I will use them too 😋 we have a lot of clay in our dirt as well here in south Germany so I will also try to copy your background style 😜 it’s really pretty!
They dig and web up their enclosures a ton, and would destroy any live plants in the enclosure. That's why he skipped out on them 🙂
Loving the rehouse Petko the enclosures look great, hoping your wife's doin ok in her pregnancy ...
7:50 wheeeeew fiesty!
You should look into printing using petg filament, much stonger than pla, uv resistant and copes with much higher temperatures
love this channel.
I want to see more about the cat in the intro though xD
Can you give us an update on all your true spiders and scorpions
Love how that scorpion was like: "Come at me Bro! Come at me!"
If the Electric Blue would bite you it would be electrifying, too. Are we getting the Booty calendar next year???
I had an idea about the design of the hinge that keeps breaking. Make a full frame for the glass, not just clip on pieces. On the hinge side make the frame thicker with a hollow down the middle for metal rod to fit and act as the poles for the hinge to work.
Every time my school friend starts wiggling its tail and legs it starts shedding I was going to say if you pre-cut the hide and back it up to the end of the glass and then put dirt inside of it you can see where they're hiding out at because the dig the dirt out and then you can see them through the glass you can even put up piece of red plastic then you can always check them when they're in their hide
The sand is back! I can rest easy now 😂
looks like your dirt has a high clay percentage
Always a pleasure to watch your videos. I don't keep any spiders as pets although I have caught, observed and photographed some jumping spiders, (so cute and curious they are).
I'm moving to Arkansas, USA soon and they have Tarantulas there. I'm pretty excited to observe those. I may have to start an Instagram account so I can share some pictures of them with you.
Awesome thanks so much for rehousing
Petko, all you need is enough clay sediment in your substrate to be able to sculpt anything your mind can inspire... Also I've found that micro mesh helps any kind of 'dirt' to stick and hold shape... Just a thought mate... P.s, love your work
Phormicoptus 😂😂
I needed this video today Petko, the hair looks good and the new style of enclosure looks great.
I like the new backgrounds very nice color and texture
I love your videos and I look forward to them every week. Gutted you only do 1 video a week now. Sending my love x
That scorpion is quite feisty Absolutely LOVED IT!!!! so much fun to watch ,,, Great video I do truly hope that you will go back to 2 x a week sometime in the near future... I miss seeing the double take and it feels to long in between but ok that was my 2 cents.... Love all that you do !!!!!
Put the enclosures back outside and bend them back into shape. It might work.
Ive never tried to fix an enclosure thats been bent by heat but I have had success with other things by repairing them with my heat gun I use for crafting. Just a thought if you ever have something like this happen again
Could you do a video on the T's to keep that can be free handled. If there are any?
Very very good video from you. 👍👍👍☺☺☺ 🕷🕷🕷🕷.
20:40 You got some bite marks on the poke stick. :)
"Better look out for the fingers"
*starts to grab literally everything inside the enclosure*
Nice mini skateboard ramp
you possibly can boil those warped plastics for short period of time and place back on to fix them.
Petko can you show us how you have the lighting set up in your shelves?