This is the first video that I could totally grasp the instructions. You were clear and didn’t rush through. Thank you so much, look forward to seeing more!
This is by far the BEST video I have seen in using the Cameo to cut and print. Your detail and personal experience put this over the top! I have been struggling with that double cut line and have never seen a video on how to avoid it. Thank you!!!
I have been watching videos to learn how to use my Silhouette Cameo for months. With this video, I completely grasped the instructions and have made my first project. You rock, Andrina.
I have spent hours looking at tutorials, many of which I have just quit because either you can't understand them or they go too fast, or they just have so much information you just can't grasp it all at once, or they simply don't really know what they're doing. I am 81 y/o and this is the first tutorial I have understood I realized that many people leave out things such as the part about it needs to be png . I hope to see more of your tutorials so I can continue expanding and learning how to use this fascinating machine. Thank you very much. le
Hello, I have to start out by saying WOW. This is the 1st complete print and cut video for silhouette that outlined the pros and cons and actually cut and showed them. I started out with cricut maker 3 then 2 1/2 yrs ago I purchased Cameo pro plus along with silhouette business studio. I find silhouette business studio so much more difficult to use vs cricut design space. With silhouette business edition it takes numerous steps to complete simple steps vs. circuit design space. With silhouette I have wasted much materials. Now that Cricut has a large cutter machine I will be investing in it and selling my silhouette cameo pro plus. No more headaches and wasted material. Again thank you so much for this clear video
I'm sorry you feel like that ..I personally feel the opposite..to me cricut design space is too much just for basics ..Can't do as much like silhouette studio..for designing silhouette studio is way better..but if you decide to sell it you can always design in Silhouette Studio save it as an svg an cut with your cricut I have a tutorial on that 💙
Thank you so much, i am a french designer and i just bought my silhouette cameo +, i saw many of tutorials, but yours is the most easier and so satisfying to watch, with you it is so easy to use the cameo , thank you so so much
❤ your instructions. I have watched so many videos about printing and cutting stickers. And yours is the best so far. You really explain everything. Plus you’re giving me the Cardi B vibe. I’ll be thinking I’m listening to her craft 😂
I totally loved this video ! You got right down to business and explained every thing perfect. No chatter, small talk are promoting . WOW im so happy to find you, i could not resist subscribing, so here i am.
I'm late to the game but you're amazing. Yes... You did teach me quite a few things especially about the bleed feature and cutting stickers. I've been using washi tape and force of 14 and blade on 1 or 2. I think I'll have better luck your way! Thank you!
Thank you so much for this video! I have been trying to get my machine to recognize my print and cut for the last two days til I was about to give up! You have been a lifesaver! Once I took off the borderless print ... it scanned perfectly!
May I please call you queen of silhouette or just a guru you are the best and I mean THE VERY BEST!!!! I followed along each step and when I was done I got so excited I could believe what I had just done (I was so excited that I woke my grandkids up) lo.g story short I bragged at 4am thank you so much is there away that I can buy you a coffee or give you a tip your so amazing
I'm so glad I was able to help.. If you any questions feel free to ask and I will try to incorporate in my upcoming videos.. Here is the link where you can buy me coffee ☕ ☕ ↘️⬇️↙️ www.buymeacoffee.com/Andrina Thank you so much for watching ❤
Perfect video❤. I have had my cameo pro for 2 yrs and have not yet used it because I do not know how to navigate the software. This video has helped a lot🙏🏽
Excellent tutorial without all the chitchat BS. I'm very new to print and cut, but I do graphic design. I have been searching for a video to show exactly how to set up to print an cut step by step. Thanks so much!
Thank you so much for sharing this.. I learnt a whole lot, everything is so well explained and so easy to follow. The tip about the print bleed was something I did not know, definitely using it.
When I tell that's why I'm sooooo happy to have found you long time ago I had to come back to this video bcuz I forgot what to do thank you for being who you are !!
This is probably the best video I’ve seen explaining this process. I’ve been designing my own stickers for over a year and didn’t have the money for the machines yet so I was sending the designs to a company to print and cut them for me. I just got my printer and cutting machine and I’ve been researching like crazy on how to properly cut them. Most videos are too chatty and lose me or too vague, you explain the process so well. Thank you!
Omg thank you so much for your video. This is the only video that I have watched and understood. I did my first cut and print. PERFECT... I will for sure be watching for more content.
I’ve watched dozens of videos, and this is the only one that told me why certain things weren’t working. Thank you. I’ll be a long time subscriber. 😀❤️
Thank u for all the free information i cant stress enough how u helped me thats why i subscribed because of all your free info and so good at your work
Great video thank you. I managed to print out all good but colours are a bit off. (white sticker paper) they cut out all OK but how do I get it to cut them out so I don't need to use scissors after wards as u cut individual stickers out? My sticker paper is really thin I'm. Also using glossy pda sticker paper.
best video I have seen thank you what sticker paper do you use? some files say clipart are those the same as PNG files some files say sublimation can I use them for reg PNC?
I left this comment on a video you did 2 years ago so I thought I'd ask here if someone else is interested. Thank you for all you do for the crafting community. You are genuinely helping us and provide awesome content. You are so dope at this! Can you tell us more about the ecotank 16600 you use? Is it better than your older printers? I have a et 15000 but dont know if i should use it for regular printing or sublimation. I really want to print my own 12x12 cardstock to do these types of projects but not sure if it will be the best quality. Does it really depend on the paper used? All other videos about the newer ecotanks are all sublimation videos 🙄 Thanks in advance.
Hey thank you for being a subscriber..I honestly love my eco tank I got it in April 2021 and have only filled ink 2x saves money on ink ..and yes it depends on the quality of your paper
This is the first video that I could totally grasp the instructions. You were clear and didn’t rush through. Thank you so much, look forward to seeing more!
Glad I can help 💙
I agree!!
This is by far the BEST video I have seen in using the Cameo to cut and print. Your detail and personal experience put this over the top! I have been struggling with that double cut line and have never seen a video on how to avoid it. Thank you!!!
You are very welcome and thank you for watching 💙
I have been watching videos to learn how to use my Silhouette Cameo for months. With this video, I completely grasped the instructions and have made my first project. You rock, Andrina.
Thank you glad I can help
I just bought a silhouette and need to learn studio. Your tutorial thus far has been the most informative. Thank you
You are very welcome
I have spent hours looking at tutorials, many of which I have just quit because either you can't understand them or they go too fast, or they just have so much information you just can't grasp it all at once, or they simply don't really know what they're doing. I am 81 y/o and this is the first tutorial I have understood I realized that many people leave out things such as the part about it needs to be png . I hope to see more of your tutorials so I can continue expanding and learning how to use this fascinating machine. Thank you very much. le
Thank you for your words..I'm so glad I'm able to help 💙💙
Hello, I have to start out by saying WOW. This is the 1st complete print and cut video for silhouette that outlined the pros and cons and actually cut and showed them. I started out with cricut maker 3 then 2 1/2 yrs ago I purchased Cameo pro plus along with silhouette business studio. I find silhouette business studio so much more difficult to use vs cricut design space. With silhouette business edition it takes numerous steps to complete simple steps vs. circuit design space. With silhouette I have wasted much materials. Now that Cricut has a large cutter machine I will be investing in it and selling my silhouette cameo pro plus. No more headaches and wasted material.
Again thank you so much for this clear video
I'm sorry you feel like that ..I personally feel the opposite..to me cricut design space is too much just for basics ..Can't do as much like silhouette studio..for designing silhouette studio is way better..but if you decide to sell it you can always design in Silhouette Studio save it as an svg an cut with your cricut I have a tutorial on that 💙
Thank you so much, i am a french designer and i just bought my silhouette cameo +, i saw many of tutorials, but yours is the most easier and so satisfying to watch, with you it is so easy to use the cameo , thank you so so much
Thank you very much ..you are very welcome glad I can help 💙
❤ your instructions. I have watched so many videos about printing and cutting stickers. And yours is the best so far. You really explain everything. Plus you’re giving me the Cardi B vibe. I’ll be thinking I’m listening to her craft 😂
@user-nv3px5sc7n lol thank you 💙
I totally loved this video ! You got right down to business and explained every thing perfect. No chatter, small talk are promoting . WOW im so happy to find you, i could not resist subscribing, so here i am.
What’s the cut setting you running for this ????
Best explanation on how to use Silhoutte! I finally understand. Thank you!
Thank you for watching
BEST SILHOUETTE TUTORIAL I HAVE SEEN!!!!!
I'm late to the game but you're amazing.
Yes... You did teach me quite a few things especially about the bleed feature and cutting stickers.
I've been using washi tape and force of 14 and blade on 1 or 2.
I think I'll have better luck your way! Thank you!
Your welcome 💙
Thank you so much for this video! I have been trying to get my machine to recognize my print and cut for the last two days til I was about to give up! You have been a lifesaver! Once I took off the borderless print ... it scanned perfectly!
💙💙💙
This is the tutorial that the people need! Thank you!! Clear and to the point!
@@themarvelbeautybar5316 thank you so much 💙
May I please call you queen of silhouette or just a guru you are the best and I mean THE VERY BEST!!!! I followed along each step and when I was done I got so excited I could believe what I had just done (I was so excited that I woke my grandkids up) lo.g story short I bragged at 4am thank you so much is there away that I can buy you a coffee or give you a tip your so amazing
I'm so glad I was able to help..
If you any questions feel free to ask and I will try to incorporate in my upcoming videos..
Here is the link where you can buy me coffee ☕ ☕
↘️⬇️↙️
www.buymeacoffee.com/Andrina
Thank you so much for watching ❤
Perfect video❤. I have had my cameo pro for 2 yrs and have not yet used it because I do not know how to navigate the software. This video has helped a lot🙏🏽
A video that explains every single detail. I appreciate you
Thank you for watching 💙
Excellent tutorial without all the chitchat BS. I'm very new to print and cut, but I do graphic design. I have been searching for a video to show exactly how to set up to print an cut step by step. Thanks so much!
Thank you for watching
Thank you so much for sharing this.. I learnt a whole lot, everything is so well explained and so easy to follow. The tip about the print bleed was something I did not know, definitely using it.
Thanks for the awesome tutorial! I've been watching so many tutorials but nothing clicked until I saw yours.
You are very welcome
Saving this tutorial as my go to for information abd instruction.
It's the best. Thank you.
@kathysullivan802 thank you 😊
The best video! Thank you ❤ no drama no nail shows..direct to the point!
@@ChentaAdie 💙💙
OMG This was the first video I was able to watch and follow and it helped me with my project
THANK YOU
THANK YOU
THANK YOU
THANK YOU
When I tell that's why I'm sooooo happy to have found you long time ago I had to come back to this video bcuz I forgot what to do thank you for being who you are !!
Thank you for watching 💙
I HAVE LEARNT ALOT FROM YOUR VIDEO, I REALLY APPRECIATE IT.
💙
This is probably the best video I’ve seen explaining this process. I’ve been designing my own stickers for over a year and didn’t have the money for the machines yet so I was sending the designs to a company to print and cut them for me. I just got my printer and cutting machine and I’ve been researching like crazy on how to properly cut them. Most videos are too chatty and lose me or too vague, you explain the process so well. Thank you!
Thank you very much..and congratulations on your new supplies
Just when i thought cameo sucked... your video popped in thanks very much!!!
You are very welcome
Do you have a video on how to choosr which blade, depth, etc to use? Just starting out!
Awesome tutorial. Best one I have seen for print and cut. Thank you for sharing your knowledge.
Omg thank you so much for your video. This is the only video that I have watched and understood. I did my first cut and print. PERFECT... I will for sure be watching for more content.
You are very welcome 💙
Thank you!!! I was engaged the entire time and i retained it!
Your welcome
You are an excellent instructor. I found this video most helpful. Well done.
Thank you very much
You are the best! very nice and neat tutorial .. very informative .. Thank you very much.
Thank you
Thank you Omg I always struggle with print and cut in silhouette
Thank-you Andrina, very well explained. I too didn't know about the print bleed.
Your video is by far the best tutorial I’ve seen since I’ve been searching! Thank you sooooooo much!!!
Thank you and your welcome 💙
@@AndrinasKreations❤
I’ve watched dozens of videos, and this is the only one that told me why certain things weren’t working. Thank you. I’ll be a long time subscriber. 😀❤️
Thank you for watching 💙
@@AndrinasKreations That LED strip trick is GENIUS
The best video for beginners! hands down! great job!!
Thank you
Wow thank you so much so clear with everything
You are very welcome
Thank you for sharing. I needed the help.
@@TheTruckingScribe your welcome 💙
I have been struggling for so long on how to do this. I still don’t have it all the way down, but I’ll get better as I practice. Thank you so much!!!
You are very welcome
Great video! You explained everything in such a simple way that it makes sense for a newbie. Thank you!
Thank you 💙
Boriqua you helped me out a whole lots with this video. Thank You !
I'm dominican 🇩🇴..glad I can help 💙
This is the best video I’ve come across! You are awesome at tutorials! 💕
Thank you for watching
Wow..the best I've seen, thank you so much
Thank you for watching 💙
You are a fantastic teacher!
Thank you
This Video is everything I was searching for and some more! Thank you so much.
Thank u for all the free information i cant stress enough how u helped me thats why i subscribed because of all your free info and so good at your work
Thank you so much I really appreciate it
Thank you so much for sharing the tip about bleeding. I never knew about that. I will definitely keep that in mind.
You are very welcome 💙
a year later and just found you. Thank you so much for this!!
You are very welcome 💙
Wonderful explanation thank you!
Your welcome
Thank you! Learned so much from this and discovered my rollers were not placed correctly. All good now 🥰
You are very welcome
Great tutorial. Just beginning to use my Camero 4. Thank you for the mat tip.
Thank you sis! I had to revisit this tutorial :) The best teacher around!!
You are very welcome baby girl
You are an awesome teacher!!
Thank you
Thank U! Very detail! 💯🥰
WOW! What a fantastic video! Thank you so much!
Thank you for watching
Hello ..Thank you for your videos. Please do u have a video on how to make bottle labels in silhouette studio
Great instruction!!!You helped me so much with my new silhouette!
Just bought a Cameo 4 with your code.. so excited for it to come so I can try your projects
You will love it
Thanks so much for this tutorial! 🤍 Thanks for sharing your knowledge.
Just subscribed. This is the best Video that explains print then cut. I’ve recently got a cameo pro for Xmas but I’ve always used Cricut !!!
Thank you for subscribing
Very detailed. Enjoyed your tutorial
Thank you for watching
Just the video I needed. Thanks!
thanks! the easiest tutorial
💙
Another fantastic tutorial Andrina, I had forgotten about the print bleed so this was especially helpful
Thank you x
Thank you 💙
Very well explained
Thank you for watching
Thank u so much for everything you have helped me with this video ❤
💙💙
@@AndrinasKreations if I run into an error can I reach out to for help
@@mintyg08 join my free fb group Andrina's Kreations crafting lounge answer all 3 questions to get approved ..you can ask questions post etc
@@AndrinasKreations ok heading to the book now to join
@@AndrinasKreations I found it but it says to paid
You’re Absolutely Amazing. Thank you 😊
Thank you 💙
Thank you soooooo much!!!!❤
Thank you I love this video
💙
Great video, thank you for the tips
This is a great video 😊
Thank you
Thank you, I learned alot
Your welcome 💙
Wow! Thank you for the tutorial! it was super helpul!💖
I love this video, very informative 😊
Thank you
Thank you for sharing!
Great video thank you. I managed to print out all good but colours are a bit off. (white sticker paper) they cut out all OK but how do I get it to cut them out so I don't need to use scissors after wards as u cut individual stickers out? My sticker paper is really thin I'm. Also using glossy pda sticker paper.
Yas thank you ma'am ... I have been waiting...you the 💣💣💣💣
You are very welcome
Thank you for this awesome video. Very helpful for me🥰
You are very welcome 😊
Thank you so much for this tutorial! Super easy to follow 🥰✌️
You are very welcome
YOU ARE THE BEST!!!
Thank you
love it, thx u so much
💙💙
Being a newbie this has really helped!! Thank you❤️
Hi! Love your videos! do you have one in how to calibrate your machines? Im trying to do the print and cut but the cut its way off :(
I show how I calibrate mines in this video by moving the motor back and forth 💙
Thank you for the video!!
Great video. Thanks for sharing.
Thank you for watching
best video I have seen thank you
what sticker paper do you use?
some files say clipart are those the same as PNG files
some files say sublimation can I use them for reg PNC?
I just try different brands of sticker paper online labels,Mr labels etc..yes is the same and yes you can use the sublimation ones too
Great video. Thank you
Thank you for watching 💙
Love the video!
Great video!!!
Best video!
Thank you for sharing this info…I am still having issues with print bleed not showing up. What could I be doing wrong?
Make sure is turned on
Sooooooo helpful thank uuu!!
Your welcome
Hey, loving your videos.
Thanks for all the help.
If you print in silhouette, will you be able to cut with Cricut?
No
Thank you so much 💞💞
Can you make a video showing how to calibrate the silhouette machine please...I'm frustrated
I have never calibrated mines..but there is great tutorials here on UA-cam 💙
Thank you so much.
I left this comment on a video you did 2 years ago so I thought I'd ask here if someone else is interested. Thank you for all you do for the crafting community. You are genuinely helping us and provide awesome content. You are so dope at this! Can you tell us more about the ecotank 16600 you use? Is it better than your older printers? I have a et 15000 but dont know if i should use it for regular printing or sublimation. I really want to print my own 12x12 cardstock to do these types of projects but not sure if it will be the best quality. Does it really depend on the paper used? All other videos about the newer ecotanks are all sublimation videos 🙄 Thanks in advance.
Hey thank you for being a subscriber..I honestly love my eco tank I got it in April 2021 and have only filled ink 2x saves money on ink ..and yes it depends on the quality of your paper
Do you have any videos of how to print and cut little words to put on little dog tags??
All print and cut will be the same? But if you have any pictures of what you mean plz post it in my fb craft group Andrina's Kreations crafting lounge