Polaris Ranger XP 1000 | DaSen Backup Reverse LED Light Install
Вставка
- Опубліковано 9 лип 2024
- How to install a DaSen backup reverse/spotlight LED light kit on a Polaris Ranger XP 1000. DaSen 3 inch 18W backup reverse LED light w/wiring kit plus roll cage spotlight mount bracket fit Polaris Ranger full size. This is a educational video on a 2018 Polaris Ranger XP 1000. 2018 Ranger 1000 XP LED light
UTV DIRT Swag!!! It's finally here!!! Show your support and visit our Merch store to get your custom UTV DIRT swag today!!:
shop.spreadshirt.com/utv-dirt
Follow us on Instagram:
/ utv_dirt
#ad
amzn.to/2KZkwkp
I've got the same lights on my XP 1000 and love em. Nice job guys!
Nice! I was really surprised how bright they were and are well worth the money. Really nice addition to the build. Thanks for watching!
@@UTVDIRT how short were you guys on wire?
@@fistcover3831 I bought two little rolls one black and red. I believe they were 7ft.
Great job, very nice!👍
Thanks!
@UTV DIRT those back up lights are crazy bright, Zeus is lit 🔥
Thanks Joey!
@UTV DIRT your very welcome!
I have a 2020 Ranger Crew 1000 EPS. I did not see a reverse light connector on mine. The muffler is where you mounted your reverse light. We mounted lights up high on the back. I just bought two 6" wide LEDs and made my own wiring harness. We mounted them in screw holes that mount the roof. We also ran the wires under the floorboard in the channels and came up in the rear diagonal supports for the roll cage.
Nice! My muffler is not on the back so it worked out great for me. Also check out my video on the beacon light. Its one of my favorite mods. Thanks for watching!
yeah i need to work on the 4 inch light at the top back of the cab too, but i ordered wire today. i don't understand how you routed that wire. i already have mine mounted on the two outside holes. i don't need to do the back up lights as i bought the Thumper Fab winch ready rear bumper. the winch should be here by the end of the week.
Nice! It was a pain to run the wire through the Rangers frame but I used a chase wire and it helped.
Cool vid also have a bed light and a backup light on my 900
Nice! Thank you!
well i'm tired of fighting the weather. and as i have to take mine in for a service and a recall, i'm going to have them install the wiring harnesses and the winch. i did fined on amazon a harness extension. it say it's 60 inches but someone commented on it and said it was 30 inches. of course i found this after i bought the wire to extend that harness.
I am sure the dealer will take care of you.
Where did you come of of the dash to transition into the cage? Can you show a good pic of that please
I came out right at the edge of the dashboard. There is a little gap and fed it up the roll cage.
How did you run your wires inside the roll cage? I can't seem to get the wire to go through the tubing.
Yes I ran them inside the cage. You have to feed a chaser wire from the top of the cage down to the bottom. Then tape your wires to the chaser wire and pull them up.
I’m not getting key power on my pulse bar. I’m getting constant hot but no key hot. Do you have any I ideas why? Thanks.
Sounds like you blew a fuse. Check the fuse box by your battery.
Hey man! Love all the videos! Sad to see the ranger go! Just had a question..i purchased the same dasen back lights and pigtails for busbar! Wired the lights up and they work but the rocker switch stays on continuously! Then i wired key hot only and nothing works? Did you have to rewire anything when you wired key hot? Thanks
Thanks! Bigger things coming in the future! I wired them to key hot only and the light came on the rocker switch only when key was on.
@@UTVDIRT thanks for the reply! Ive got to do some searching because when i wire to key hot nothing works! Take care and cant wait for more videos!
Thanks!
@@Ironmikehen search wiring diagram for however many pin rocker switch u have. They sale the jumper wires for that too... but they are super easy to do yourself
@@Blownblackknight thanks! But I traced the wires back and found i had a loose connection! Got it all fixed! Thanks again!
Need a closer view of wire route how to get inside the tubing.
I just installed my reverse light an not getting any power any ideas what to check
Sounds like you might have a broken wire or a loose connection. If you have a meter you can check for continuity on the wires to see if you have a break in the wire. Hope this helps.
How did you wire the plug and play connector to your wire harness for the lights. I know black and black go together what about the blue wire from the plug and play connector?
The top wire on the plug is your ground. The middle wire is for key hot and the last wire on the plug is for constant hot. Hope this helps. Thanks for watching!
@@UTVDIRT I believe your talking about the rocker switch, I’m talking about the connector that goes to the bus bar
@@austinalvarez5308 No I am talking about the pulse plug that plugs into the bus bar. Check out my video on how I installed the front bumper LED bar. I explain how to wire the pulse plug up.
@@UTVDIRT ok thanks!
I’m going to get some looks bright
They are very bright. I was impressed especially with price of the kit at 65.00.
Where do you get your fuse box plugs?
I purchased them off of amazon. amzn.to/313rjhf
How did u get past the block in the frame?
I connected the wires to a tracer wire and pulled wires up the frame. Not sure what block you are talking about.
I'm assuming these would fit a Yamaha Wolverine??
They might work. I think these are universal and use a two hole bolt pattern.
Ok cool. Thanks bro
YW!
where did you get them arched a-arms? How much
I purchased them from Highlifter.com
What rocklight u using?
I am using 5150 rock lights. Check out the rock light install video I did on my UA-cam channel under the videos tab.
Got a link for those led pods?
Yes link is in the description of the video.
What roof is that? Thanks
EMP makes the roof. Thanks for watching!
Would you sell your old wheels and tires?
I thought about it but decided to keep them for spares. Never know if I get a flat or if I want to go back to stock I will have them in the garage.
I have mine for sale like brand new off 2018 ranger 1000
How much Lakey?
Why didn’t you just plug into the extra connector under the bed box on the drivers side? Seem like it would’ve been a lot easier and you wouldn’t need more wire.
Could of done it that way but went this route.
These are some high tech Mexicans
Ok not to mess with you. However 🤦♂️what back up lights on anything have light in the bed Mike🤔 👍🏼
Haha you never heard of a truck with a cargo light on the back. Best of both worlds cargo light and reverse backup LED. Lol