I had,6 polaris ranger,or razors!! Still have 2011 xp800, and a 2020xp1000, northstar,edition, it's got big, lift,32 inch tires, fog lights,roof light, front bumper grill light, horn, rear chase light, back up alarm,whips, radio, windshield wipers, fluid windshield washer, portals with 30% hear reduction,custom made inside cabin ceiling 3 switch toggle panel, look it up if you have time!!! Your videos our fantastic quality compared to mine, great job on the install, thanks for sharing with the polaris boys!!!!
@@automotivecustomlighting2555 Excellent. Thanks for the full step x step. A lot of people start then skip showing the most important steps. Thanks for keeping them coming. Nicely done.
Thanks for making such a detailed video. It's great to learn new things. I understood the first half of the video completely, but wasn't sure about what the auto+ switch/hunters edition wiring harness. Could you explain what this is for please. Thanks again.
Hello, The harness we make, you have the choice between 3 options. Auto ONLY, Auto + 2 Position Switch, and Auto + 3 Position(Hunters) Auto ONLy does exactly what it says. Auto + 2 position switch allows Auto lights to come on in reverse but also gives you the ability to turn the light on when NOT in gear via switch. Auto + 3 Position(Hunters) Gives you a three position switch which allows you to completely turn OFF the reverse lights even if its in Reverse gear. Middle position Automatic, third position is to turn the light on in any gear.
Do you guys happen to have a lightly used 10” sub and amp that fits under the passenger seat and has the wiring harness that is plug and play with ride command. Money is tight just shortly after buying this but cant use the radio without the sub and amp because it sounds terrible. Lol.
Just installed their "auto + switch" harness on our XP 1000; it was pretty easy thanks to this video and the light works great without "glow" when the engine is off. No relay t-mounting bracket is included, as in the video, so I fashioned one out of a small piece of perforated metal hanger strap. That took more time than the rest of the project.
Contact us, we can ship you one. We have a new person assisting with making these. A few orders slipped out the door without the metal piece before we caught it.
Excellent video and thank you. Hoping to purchase this product soon. Do you have any products for the other plug that is in the back next to that back up beeper plug that you used for this plug and play product? Thank you.
Hello, Black brackets is mainly for machines with rear exhaust while the silver brackets is mainly for if you have the side exhaust. You can purchase them separate automotivecustomlighting.com/store/rear-mount-brackets-for-diode-dynamics-light-bars/
@@automotivecustomlighting2555 where is the relay/light getting power from then? i dont see any other source in the video other than the beeper wires. Just trying to understand.
I had,6 polaris ranger,or razors!! Still have 2011 xp800, and a 2020xp1000, northstar,edition, it's got big, lift,32 inch tires, fog lights,roof light, front bumper grill light, horn, rear chase light, back up alarm,whips, radio, windshield wipers, fluid windshield washer, portals with 30% hear reduction,custom made inside cabin ceiling 3 switch toggle panel, look it up if you have time!!! Your videos our fantastic quality compared to mine, great job on the install, thanks for sharing with the polaris boys!!!!
Thank ya
Finally a in-depth, step x step video on how too. Thanks guys.
Your Welcome. Looking for to make tons more of these videos
@@automotivecustomlighting2555 Excellent. Thanks for the full step x step. A lot of people start then skip showing the most important steps. Thanks for keeping them coming. Nicely done.
will this work on my 2025 xp1000
Thanks for making such a detailed video. It's great to learn new things. I understood the first half of the video completely, but wasn't sure about what the auto+ switch/hunters edition wiring harness. Could you explain what this is for please. Thanks again.
Hello,
The harness we make, you have the choice between 3 options. Auto ONLY, Auto + 2 Position Switch, and Auto + 3 Position(Hunters) Auto ONLy does exactly what it says. Auto + 2 position switch allows Auto lights to come on in reverse but also gives you the ability to turn the light on when NOT in gear via switch. Auto + 3 Position(Hunters) Gives you a three position switch which allows you to completely turn OFF the reverse lights even if its in Reverse gear. Middle position Automatic, third position is to turn the light on in any gear.
Do you guys happen to have a lightly used 10” sub and amp that fits under the passenger seat and has the wiring harness that is plug and play with ride command. Money is tight just shortly after buying this but cant use the radio without the sub and amp because it sounds terrible. Lol.
Can’t find the link
Just installed their "auto + switch" harness on our XP 1000; it was pretty easy thanks to this video and the light works great without "glow" when the engine is off. No relay t-mounting bracket is included, as in the video, so I fashioned one out of a small piece of perforated metal hanger strap. That took more time than the rest of the project.
Contact us, we can ship you one. We have a new person assisting with making these. A few orders slipped out the door without the metal piece before we caught it.
Excellent video and thank you. Hoping to purchase this product soon. Do you have any products for the other plug that is in the back next to that back up beeper plug that you used for this plug and play product? Thank you.
Which plugs? We only do lighting accessories, so if it is lighting related im sure we do.
Where did you get the relay harness?
We make them in house. automotivecustomlighting.com/product-category/offroad/polaris/polaris-ranger/reverse-light-accessories/
@@automotivecustomlighting2555 thank you
Where can I get the black mounting bracket? Mine only came with the silver mounts. Thank you
Hello, Black brackets is mainly for machines with rear exhaust while the silver brackets is mainly for if you have the side exhaust. You can purchase them separate automotivecustomlighting.com/store/rear-mount-brackets-for-diode-dynamics-light-bars/
Where can I get me this same relay?
Visit the website or message us
Sorry I figured that out right after I sent the comment. Better question, how did you connect the toggle switch to the same light?
Is the separate and dedicated ground necessary, most relays don’t include this
Not sure what ya exact info you are needing. The relay setups we make is Plug and Play.
Isn't that plug only meant for a .05 Amp back up beeper?
Correct. That is why it's only used to trigger the relay.
@@automotivecustomlighting2555 where is the relay/light getting power from then? i dont see any other source in the video other than the beeper wires. Just trying to understand.
Can you do a video on those whip lights?
If we get another machine in soon, yes