I got the Ozer printer, it's a bit more expensive but a lot better than the brother ones, it is also designed for printing graphical designs and not just text/document which is why the brother printers fail. This thing is a beast, works with spirit. Fineline has to be really black/dark otherwise the machine wont pick it up but copying my designs in procreate a few times makes a solid very thin fine line. 9/10 machine.
Great video once again , wish I saw it four days ago I literally just bought a Phomemo m08f thermal printer . As far as the Phomemo is concerned, my experience, prints a great stencil so far . Lots of features to play around with as far as darkness is concerned but not enough . It does grab the end of spirit paper so I found cutting the end of the clear plastic carbon sheet off at the bottom reduces the grab and if your quick enough , opening the cover . I’ve printed lined stencils, and a couple made on the Ghostline Stencil app which isn’t that great so if know a better be please tell me lmao . My Phomemo came in at 250 Canadian so like 200 I guess American . I’m going to try Prime stencil paper I think it’s called which apparently doesn’t grab. Thanks for the great review !!!
Since the stencil ink on my eco tank multipurpose color printer is almost out of ink, i opted for the Peripage wireless bluetooth tattoo stencil without the carbon cartridge(that's the way i want it anyway), thermal printer, it prints great, the dark black stencil i put the volume to low, normal stencils, adjusted to middle, the high strictly for realistic portraits, worked out great, inkless thermal printing is the craze of future stencil printing, great video🤘🏻
I just got mine and my spirit paper gets jammed every time. Open the printer, put paper in evenly blue side down, close printer, press feed, paper feeds correctly, press print… paper sticks and gets crunched up half way through print. Any ideas?
Hi, is there any update to fix the inaccurate size or measurements on the app? The measurements on the app when you make adjustments is not correct when it prints out. The print outs come smaller. An inch at the app would come out 0.75 or less when it prints. So the measuring guide needs to get recalibrated or re adjust…. Its very annoying when you want to print accurately to your reference…
Hello, the thing is that from the cell phone app it tells me to close the cover and on the printer I press the feed button and it only makes a sound and it doesn't print and in the app it only tells me, close the cover and I'm done. all.
Thats strange… have tou tried to disconnect and reconnect the printer? Otherwise just contact yilong and explain the situation. I am pretty site they can help you out
Hello, I have seen that the design is oriented to the right, and when printed, its orientation is to the left, which means that the image has to be inverted every time it is printed?
Hi does it need to have special stencil paper or does it work with spirit paper classic thermal ? I tried but the app says please close the flip even if it is flipped ???
You can set the darkness of your stencil so i think for a fineline you might need to set it a bit darker. But it takes a bit of playing around with settings to find what works for you. Also if you have trouble printing something fineline with any of the setting, it helps sometime to duplicate the design a couple of times (if you use a digital drawing app) to get the stencil out clearer
I got the printer, it shows me that everything is connected but when I’m trying to print it’s just printing me an empty paper, do you know why this isn’t working?
I got this printer but I want to be able to use it on other printer apps is that possible? Also when I print it’s always dark in areas and then it fades out. Not sure what’s wrong with it but sometimes it’s good and sometimes it just don’t transfer the ink and I make it as dark as I can in the app
I bought the same one. It doesnt open with the button idk what's wrong with it. I also tried to print something and it didn't print anything and tore the sides of my paper
Yeah if you cant load the paper correct it will tore of sides and make a mess. If i were you i would contact the customer service of yilong to get things straight…. Because i am sure that id it works correct you will love it
I had to push the button very hard to open, also it's very finicky to get the paper not to catch on the sides when printing, and the quality of the print was garbage light for me even after all the editing/darkening effects 😭
He bart , ik heb naast mijn inkjet stencil printer nu deze printer aangeschaft . ik heb alleen problemen met spirit papier en grotere stencils a4 size . met de bijgeleverde stencil geen probleem alleen met spirit . Aangezien jij deze al langer heb ben jij bekend met dit probleem ? Hij print stukken niet of komt vast te zitten echt heel frustrerend en zonde van het papier .
Hey, met deze printer heb ik geen problemen met spirit papier. Met het nieuwere modeleaar het lint in zit wel. Welke versie heb jij? Het is wel vervelend dat je dit probleem ervaart. Kijk even of je de klanten service kunt bereiken. Misschien dat die iets voor je kunnen betekenen
Sometimes it's just easier then trying to force it pluses with my pantex thermal once the flap is closed it will grip the paper and retract a few mill and that way you can be sure that the stencil is prepared ready for a clean print
I ordered one a month ago and got nothing.. waiting on a refund yet, they won't answer me back, i paid, and then they ignore me.. there website shows a number yet its not active, emails they ignore.. When they refund my money, i will delete this comment, but until then, NOBODY ORDER FROM YILONG
Do you have a tracking number or anything? Only thing i can imagine is that maybe its held by customs. Ive had that with some package coming from china and it sometimes can take forever. Ofcourse i do not know if that could be the case…
I have an order number and payment on my card, so my bank will fight it I guess. I did a dispute.. i don't know why they ignore me. I even tried calling a number they have listed on there site but it
I got the Ozer printer, it's a bit more expensive but a lot better than the brother ones, it is also designed for printing graphical designs and not just text/document which is why the brother printers fail. This thing is a beast, works with spirit. Fineline has to be really black/dark otherwise the machine wont pick it up but copying my designs in procreate a few times makes a solid very thin fine line. 9/10 machine.
should i stop looking and get the ozer? is this the sign i was looking for?
@eliudperez6918 this may be your sign😋
How’s your opinion of the Ozer printer 9 months in. Looking for reliable printer for a close friend who lives in Costa Rica, to bring next trip🙏🤔
Great video once again , wish I saw it four days ago I literally just bought a Phomemo m08f thermal printer . As far as the Phomemo is concerned, my experience, prints a great stencil so far . Lots of features to play around with as far as darkness is concerned but not enough . It does grab the end of spirit paper so I found cutting the end of the clear plastic carbon sheet off at the bottom reduces the grab and if your quick enough , opening the cover . I’ve printed lined stencils, and a couple made on the Ghostline Stencil app which isn’t that great so if know a better be please tell me lmao . My Phomemo came in at 250 Canadian so like 200 I guess American . I’m going to try Prime stencil paper I think it’s called which apparently doesn’t grab. Thanks for the great review !!!
Thanks brother 🙏
Since the stencil ink on my eco tank multipurpose color printer is almost out of ink, i opted for the Peripage wireless bluetooth tattoo stencil without the carbon cartridge(that's the way i want it anyway), thermal printer, it prints great, the dark black stencil i put the volume to low, normal stencils, adjusted to middle, the high strictly for realistic portraits, worked out great, inkless thermal printing is the craze of future stencil printing, great video🤘🏻
I just got mine and my spirit paper gets jammed every time. Open the printer, put paper in evenly blue side down, close printer, press feed, paper feeds correctly, press print… paper sticks and gets crunched up half way through print. Any ideas?
Hi, is there any update to fix the inaccurate size or measurements on the app? The measurements on the app when you make adjustments is not correct when it prints out. The print outs come smaller. An inch at the app would come out 0.75 or less when it prints. So the measuring guide needs to get recalibrated or re adjust…. Its very annoying when you want to print accurately to your reference…
I have not really encountered that problem or really payed attention to the measuring guide in the app.
Hello, the thing is that from the cell phone app it tells me to close the cover and on the printer I press the feed button and it only makes a sound and it doesn't print and in the app it only tells me, close the cover and I'm done. all.
Thats strange… have tou tried to disconnect and reconnect the printer? Otherwise just contact yilong and explain the situation. I am pretty site they can help you out
Hey, did you manage to solve the problem, because I have the same problem with mine..
I have the same issue as well I’m shopping for a new one as we speak
Hello, I have seen that the design is oriented to the right, and when printed, its orientation is to the left, which means that the image has to be inverted every time it is printed?
You can choose to mirror the image in the all itself. It does not have to be inverted.
That's correct I have the same printer and I have to invert the images befor I print but other than that the printer is amazing 👏
Tengo una pregunta
No me imprime si meto la hoja así pero si imprimo con la hoja boca abajo si imprime pero no me gusta la calidad de la impresión
Play around with the setting in the app. Also depends what kind of stencil you’re trying to print
Can you adjust the size and location of the image on the stencil paper??
Yes you can, i am pretty sure i show how in the video
probably would help if i didnt pause and comment after your first print @@Tattoobart147
@@SkUmBa9 hahaha its all good 👍 hope you enjoyed the video🙏
I got this same printer and it's phenomenal
Does it work with spirit paper?
Yes it does
@@jorgebarriagallardo6699 sure dose
Hi does it need to have special stencil paper or does it work with spirit paper classic thermal ? I tried but the app says please close the flip even if it is flipped ???
I believe it works with any stencil paper. Did you take of the yellow paper of your stencilpaper?
Cool video!!
what setting did you use for fineline??
You can set the darkness of your stencil so i think for a fineline you might need to set it a bit darker. But it takes a bit of playing around with settings to find what works for you. Also if you have trouble printing something fineline with any of the setting, it helps sometime to duplicate the design a couple of times (if you use a digital drawing app) to get the stencil out clearer
I got the printer, it shows me that everything is connected but when I’m trying to print it’s just printing me an empty paper, do you know why this isn’t working?
What kind of paper are you using? And are you placing it the right way?
The app says “close de cover” but de cover is close ¿?
Thats strange… also if you have no paper in the printer?
@@Tattoobart147 The paper also says that
I got this printer but I want to be able to use it on other printer apps is that possible? Also when I print it’s always dark in areas and then it fades out. Not sure what’s wrong with it but sometimes it’s good and sometimes it just don’t transfer the ink and I make it as dark as I can in the app
Try to play around with the bla settings, you got 1 -5 i think. That might do the trick
It’s same Than the thermo m08 model seems
Could be possible, i have t tried that one to be honest
Hey thanks for the video :) I checked on the app store from my mac and didn't find it. Do you know if it's possible to print for a mac pro?
I honestly dont know. I have only connected it to my ipad. I could be that on a laptop you have to connect it with the wire. But i am not 100% sure
I just checked. It doesnt work with mac. It works with ios and android for mobile devices and laptops it only support windows
Please sir I shop it but that is feed error
Did you contact yilong?
can i use photoshop to make desings and prints with ats886 printer or only the ats886 app???
Only with the app
thank you
@@Tattoobart147
I bought the same one. It doesnt open with the button idk what's wrong with it. I also tried to print something and it didn't print anything and tore the sides of my paper
Yeah if you cant load the paper correct it will tore of sides and make a mess. If i were you i would contact the customer service of yilong to get things straight…. Because i am sure that id it works correct you will love it
I had to push the button very hard to open, also it's very finicky to get the paper not to catch on the sides when printing, and the quality of the print was garbage light for me even after all the editing/darkening effects 😭
Mine won’t open. Do I have to wait until fully charged?
No it should also open with the printer turned off or without a battery. It is spring loaded. Please contact the customer service.
@@Tattoobart147 I figured it out. Thank you for responding. Have a wonderful week.
@teliciabenson7935 you too😇
What paper is the best for this printer?? Help please
I always use spirit paper
He bart , ik heb naast mijn inkjet stencil printer nu deze printer aangeschaft . ik heb alleen problemen met spirit papier en grotere stencils a4 size . met de bijgeleverde stencil geen probleem alleen met spirit . Aangezien jij deze al langer heb ben jij bekend met dit probleem ? Hij print stukken niet of komt vast te zitten echt heel frustrerend en zonde van het papier .
Hey, met deze printer heb ik geen problemen met spirit papier. Met het nieuwere modeleaar het lint in zit wel. Welke versie heb jij?
Het is wel vervelend dat je dit probleem ervaart. Kijk even of je de klanten service kunt bereiken. Misschien dat die iets voor je kunnen betekenen
I cant open it and my papel is stock
How did that happen?
@@Tattoobart147 i dont know one of paper is stock inside y dont know how is the metod for open Just one botón? Sory for my english im from argentina
@ignaciohuguenet9108 and when you press the button it doesnt open?
You don't have to open it every time you put a paper in.
Mine wont feed the paper right if i dont
Sometimes it's just easier then trying to force it pluses with my pantex thermal once the flap is closed it will grip the paper and retract a few mill and that way you can be sure that the stencil is prepared ready for a clean print
Tanks
No problem 😌
I ordered one a month ago and got nothing.. waiting on a refund yet, they won't answer me back, i paid, and then they ignore me.. there website shows a number yet its not active, emails they ignore..
When they refund my money, i will delete this comment, but until then, NOBODY ORDER FROM YILONG
Do you have a tracking number or anything? Only thing i can imagine is that maybe its held by customs. Ive had that with some package coming from china and it sometimes can take forever. Ofcourse i do not know if that could be the case…
I have an order number and payment on my card, so my bank will fight it I guess. I did a dispute..
i don't know why they ignore me. I even tried calling a number they have listed on there site but it
Please sir I shop it but that is feed error
That sucks…. Did you contact yilong?