Samsung 32" UR59C - LU32R590CWNXZA - VESA adapter installation guide
Вставка
- Опубліковано 4 кві 2021
- This video shows how to install VESA mount adapter for Samsung LU32R590CWNXZA that I've developed.
Purchase link:
Etsy: www.etsy.com/listing/13461685... - Наука та технологія
you gave the exact information I was searching since 2019 ..... cant thank you enough....
Thanks for this video. I was finally able to mount my no-vesa Samsung screen using the adapter. I bought the adapter from the eBay link, nice and clean transaction.
Glad you liked it!
Dude your awesome and on point!!!
Thanks for the kind words buddy!
Thanks for the guide. The model I am using is LU32R590CWEXXS, which seems to be identical to LU32R590CWNXZA. I am guessing the same adapter should work as well?
Hello my friend, thanks for developing this! Are the different sizes you offer for different kinds of VESA mounts? Thanks :)
Hey, glad you like it! Yeah, smaller 75x75mm supports only VESA 75x75 standard while the bigger one supports both VESA 75x75 and VESA 100x100 standards :)
bought two and just installed them. One thing you might find difficult or unexpected, through no fault of this product, is that Samsung red Loctite's the four bolts into the mounting bracket. I stripped three and ultimately had to drill out all 8 (I did two monitors). Not a big deal, but a little more involved. A+ on this product though...
That's quite interesting, because on my monitor they used blue loctite and bolts came off quite easy. If anybody is having problems undoing the bolts, try heating them up with a lighter or something else before.
At 1:10 my screws are stripped and can’t remove them. Any cheap suggestions?
@@poltad drill them out. its easy and quick but do not mar the bracket or the threaded area of the insert. You'll need it. OP had an idea which is to apply heat although I have never done this. good luck - dont worry they will come up - go get twice as many drill bits as you need and have fun. go slow.
@@poltad Yeah, if you stripped head of the screw, your best bet would be to either cut a new head for a flat screwdriver or drill them out. But if you opt for drilling, drill them with a smaller driller bit than the screw. You don't want to drill out thread on the steel plate. If you do drill out the thread, you'll have to tap those holes again with M4 tap.
I got two of these. On one of the stands I was unable to remove the 4 bolts, heat didn't help. On the other stand, 3/4 of the bolts came out with zero fuss, no heat no special treatment, but I was unable to remove the fourth one. I'm in the process of moving and only brought basic hand tools, so I'll try drilling them out when I have access to my drill.
any idea if it'll fit Samsung LC27T550FDNXZA ?
Thanks for this video, my friends do u have a similar adapter for Samsung BX2350?
Hey, unfortunately I do not :( It's a pretty old model and almost impossible to find it on marketplace
Hi does this item work with Samsung U32R592
if i buy vesa for 32 ur59c i can buy any mount wall ? or
Is this bracket is designed to LC32G55TQWNXZA?
Hi! Where did you get the adaptor for C24RG50? Comments turned off on that video. Thanks!
Hey, please check out the description of the video, there is a link over there :)
I wish I Knew this before making my video 😅
Interesting seeing this monitor in Black, looks a bit more executive
Are you running it on Windows or Mac?
Hey, I'm running it on Windows
@@creat3dlab12 Interesting
I'm getting glitches on my monitor, I'm using it with an M1 Mac mini
@@Striker50_ Mine is working just fine...no problems whatsoever
@@creat3dlab12 Dang that's annoying, I might have to exchange it
Hi
where did you buy the black piece to adapt?
Thanks
Ugh, sorry I forgor to edit description: www.ebay.co.uk/itm/313482094670
Will the vivo monitor arm work well with this?
The adapter works with any arm that supports VESA 75x75 or VESA 100x100 standards :)
hey, awesome video! can you share the 3d model with me?
i can’t find this adapter anywhere, could you provide info on how to get one?
This one already comes with the metal plate, you do not have to disassemble your original stand: www.etsy.com/listing/1346168536/vesa-adapter-for-samsung-ur59c-u32r590
Hello i was wondering if you still had the leg/stand for the 24inch crg50 samsung monitor. if so i could potentially buy it from you
Hey, I do have the legs, but unfortunately they're not for sale since I do plan to sell complete monitor :/
@@creat3dlab12 alright, where can I get the vesa stand then
@@drandev457 You can buy it here: www.ebay.com/itm/VESA-ADAPTER-For-Samsung-CR24RG50-/313428338693?_trksid=p2349624.m46890.l49286
I installed the vesa adapter that I bought for my cr24rg50 and it went perfectly until I plugged the monitor into my pc. There appeared big black box that was like third of the screen and I have no idea why. Do you know why is that or is there a fix for it
Hey, I have no idea why that happened. There is no need to even touch electronics of the monitor in question. Did you maybe somehow hit the monitor accidentaly or broke the screen?
@@creat3dlab12 I dont think I hit it but It could be the case. i will open the monitor and check if something is wrong there then I will try to fix or replace it
Does this fit the U32R59X?
Yeah it should :)
Hello, i cant comment on the video i need to comment on bc comments are turned off. But i was needing to know if u have that 3d printer file for the Samsung curve monitor?? or if you have somewhere i can get that adapter??? thanks in advance
Hey, there is an Ebay link through which you can order the adapter :) Unfortunately I'm not selling STL files yet :)
One of the screws got stripped :( I tried using a screw extractor but have had no progress. Any ideas?
If they're using threadlocker, try heating up the screw before trying to undo it.
Where to buy the black adapter?
Ugh, sorry I forgot to edit description: www.ebay.co.uk/itm/313482094670
LOO fucking OL thx man you saved my day!
After 2 years, my monitor fall on the table yesterday midnight, one of the legs of this adapter was broken and no longer hold my 32" monitor anymore.
We are sorry to hear that, could you explain what actually happened? If one of the adapter legs broke, other 3 legs should have hold it without any problems. Your monitor could have fallen down only in case all 4 adapter legs broke or if the metal plate somehow got unscrewed from the monitor or from the adapter by itself. We can offer you a replacement adapter, just hit us up at support@creat3d.hr
Does anyone have the 3d model?
Sr mujhe ye sand chahiy
For the life of me I can’t unscrew the final metal bit off 😢 it’s like it’s glued on tight
Did you try to use any kind of heat? If you don't succeed, we do have a newer version of the adapter that comes with the metal bracket pre-installed, you can check it out here: www.etsy.com/listing/1346168536/vesa-adapter-for-samsung-ur59c-u32r590