Maverick 88 accesories

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 137

  • @bigwillakingkilla
    @bigwillakingkilla 13 років тому

    @jermz999 hey they odnt make foreends for the mavrick 88 dued to the action bars connecting it to the fore are grip rather than the cyliender to the action bars but get piccatinny rails and tap some holes on the right middle or whatever angle you would like the picatinny rails and then nut and bolt them and but a pstol grip forearmgrip , mavricks 88 only downfall no forearm assessories but if you see inside once taken apart the forearm you can see where you can place picatinnys screws n bolts

  • @FullmetaljacketJ
    @FullmetaljacketJ 13 років тому

    @jermz999 Any reason you didnt get the heat shield with ghost ring sights from ATI?

  • @FARMTRUCK01
    @FARMTRUCK01 13 років тому

    some of the maverick 88's were field models that came with a diffrent forened yours is the security model and dosnt cover the reciver at all mine was a field model that i made multi purpose security or hunting. i had to dremel a little out my forened to let the slide come all the way back

  • @ddujnitsud
    @ddujnitsud 12 років тому

    What brand side saddle is that. I just picked up a Maverick with the 8 round tube and want to put a good side saddle on her.

  • @anthonygerber8261
    @anthonygerber8261 2 роки тому

    Went to buy the Mav 88 at my local gun shop just this past Friday. They literally sold the last one the day before! Had to buy a bunch of Glock food instead. Gonna try again next week 🤞

  • @EastVan604
    @EastVan604 13 років тому

    Did the shield become lose after firing a while? looking into getting one, but the one with the iron sights attached, but if it gets lose i think ill avoid it.

  • @eag21tx1
    @eag21tx1 Рік тому

    The problem when you're the owner of a Maverick 88 is that most people like yourself won't change that pin forearm I changed it to a Mossberg 500 forend with a Magpul forend also I got it drilled and tap on the top professionally went ahead and painted and had a DuraCoat on it I added a heat shield but I put the plastic attachment which is a spacer the way you supposed to put it I added a ProMag sidesaddle archangel and an ATI folding

  • @jake51515
    @jake51515 13 років тому

    @gpsupersport Go to your local dunhams, they have em there you can buy them and they are very easy to put on, goes right into your stock!

  • @fredpope9325
    @fredpope9325 3 роки тому

    Hi, nice video. I just bought a maverick 88 cruiser. Do you know what differences there are between the cruiser and the security model except for the pistol grip, especially can i replace the grip on my cruiser with an aftermarket stock . Thank you. Fred

    • @jermz999
      @jermz999  3 роки тому

      I believe the cruise is just the pistol grip. You could purchase a stock for it if you want the full size. Should have no issues fitting a regular stock.

    • @fredpope9325
      @fredpope9325 3 роки тому

      @@jermz999 Thanks

  • @11bravo1789
    @11bravo1789 12 років тому

    Hey I have the Mav. 88 but its the field version. I have a 18.5 barrel / AR style buttstock on it but I want to put the side saddle on there. Your forend looks a bit different than the one on mine, I think mine is longer. So im a bit worried about it fitting on there. What do you know about this or should I get the 4 slug version vs the 6?

  • @pd2210
    @pd2210 12 років тому +1

    I bought this shotgun about a year ago. I didnt want to spend a bunch of money on a shotgun. It is an awesome gun at a great price.

  • @SuperPhatLip
    @SuperPhatLip 13 років тому

    What specific side saddle will fit on a Maverick 88? I want to buy one but I know not all will fit correctly I have the 7+1 Security model. Which Specific Side saddle and brand should i buy?

  • @MRALANCJACKSONJR
    @MRALANCJACKSONJR 12 років тому

    Hey bro, where did you get that heat shield? I have a Mav 88 and all the sites I go to wont/cant clarify if their specific heat shield will fit Mav 88. Help please. Thanks in advance.

  • @nokiddingobama
    @nokiddingobama 12 років тому

    I am getting this gun. But my local place has it "on sale" for $220. where did you get it for $156????

  • @mg43p18
    @mg43p18 12 років тому

    Does it hurt ur hand with a pistol grip and have u shot slugs out of ur shotty

  • @tmd11361
    @tmd11361 5 років тому +1

    I think the problem with the forend and the side saddle is because they offer two different style for ends. The one you have does not wrap around and go as far back so you shouldn't have a problem. The style I have is different then yours and probably wouldn't work. But it is good 4 Shooters with shorter arms because it does come back further so they don't have to reach as far.

  • @mexi_q_bbq430
    @mexi_q_bbq430 4 роки тому

    i know this is a old video im curious about that gun on the very top is that a western field shot gun?

    • @jermz999
      @jermz999  4 роки тому

      ONE HUNG LOWE it’s a Springfield 22lr bolt action. Super old.

  • @dakotaboysnomadicadventures
    @dakotaboysnomadicadventures 3 роки тому

    Anyone know where a guy can get a 12 inch heat shield.. all I see is 13 13.5 etc.. I'd like to have a heat shield and a particular flash light mount.. any info appreciated thanks

  • @RobertsLife
    @RobertsLife 13 років тому

    Don't waist the clowns time lmao!!!!! Do you know if you can use a choke tube on that model

  • @dasdew2
    @dasdew2 13 років тому

    @jermz999 better than a bb gun
    also is it a good idea to get knoxx recoil reducing pistol girp (no stock).

  • @bigdaddy6965
    @bigdaddy6965 5 років тому

    I hated the plastic pistol grip. Hurts your hand after 25 shots of birdshot

  • @jermz999
    @jermz999  12 років тому

    I actually put a couple gauze pads on the barrel when I put the heat sheild on. I havnt had any issues with the finish. Although the Maverick 88 is a blue finish. I could see it scratching a parkerized finish.

  • @jermz999
    @jermz999  12 років тому

    I say go for it. Not to pricey and worse case you don't like it, you can just take it off. Mine works great and actually works for me.

  • @jermz999
    @jermz999  13 років тому

    @TheMedievalMan The differences I am aware of are the saftey and the foreend. the saftey is on the trigger guard, as appose to the top tang saftey on the 500, and the forend on the 88 does not come off, The 500 forend comes off. Those are the only differences I am aware of.

    • @zacheckert4868
      @zacheckert4868 4 роки тому

      You can remove your forend😂🤦‍♂️

  • @dasdew2
    @dasdew2 13 років тому

    whats that above the mosin?

  • @Ramos2905
    @Ramos2905 14 років тому

    Its looking good jermz... what do you think of the ati folding stock? The one thats folds over.

  • @tristinhoughtaling3933
    @tristinhoughtaling3933 12 років тому

    hay man iv got a mavrick 88 too and my ati heat sheild will not stop sliding up while im shooting. Its getting very frustrating because iv tightend it so tight that iv broken screws and it still moves after only 8 or 9 shots. Im in love with my ghost ring sights that r mounted on the heat sheild and i really dont want to get rid of it. Can anyone help me out?

  • @jermz999
    @jermz999  12 років тому

    Yeah you may have the longer forened that wont allow it to be closed with the 6 shot holder. Some people just get the 6 shot and cut where it gets blocked, But if It were mine, I would just get the 4 shot holder.

  • @jermz999
    @jermz999  12 років тому

    I have shot slugs through it and its not to bad with a stock. With a pistol grip it does sting a little, But with some light loads its not to bad.

  • @thefirefenix7194
    @thefirefenix7194 2 роки тому +1

    $

  • @CrazyLegsBigOlHead
    @CrazyLegsBigOlHead 12 років тому

    Did you have any problems with the heat shield scratching the barrel during install? I was wanting to get one but most of the reviews for it say it messes up the finish.

  • @jermz999
    @jermz999  13 років тому

    @stallingbullet Sure you could. You could purchase the 28 inch barrel for it as well. Then when your done hunting, You put your short barrel back on for home deffense. At least thats what im planning on doing.

  • @nfa_Redd
    @nfa_Redd 4 роки тому

    Can u show me how to install the heat shield? Am i suppose to bend the end?

  • @darrenkim777
    @darrenkim777 12 років тому

    Do you have trouble with the ATI heatshield sliding forward when shooting? Because Ill fire 5 shots of birdshot and it will slide about 1/2 inch to the front of the barrel lug, Its not really a functionality problem but it does make the heat shield not fit flush with the reciever. I know the mossberg heat sheilds dont have this problem because there is a stop underneath it to prevent it from sliding forward.

  • @jermz999
    @jermz999  14 років тому

    @Riflemanm16a2 lol Yeah I frequent a few forms. The side saddle was 30 bucks. There are more expensive ones out there but this one has held up just fine. As long as you use some sort of Gun tight for the screws. I installed it in 10 minutes. Nice and easy mod for the money.

  • @mg43p18
    @mg43p18 12 років тому

    Have u tryed the houge pistol grip for it.? I think its a hard rubber grip ...for u know if they make a wooden grip for it

  • @robertyoungman3175
    @robertyoungman3175 Рік тому

    Too bad Mossberg refuses to support this shotgun. They will NOT supply any barrels.

  • @ViceAdmiralMcNugget
    @ViceAdmiralMcNugget 13 років тому

    thats cool, i also own a maverick 88 and a mosin nagant 91/30.

  • @jermz999
    @jermz999  13 років тому

    @boozeye66 The shell holder mounts by removing a couple screws that go through the receiver. Its very easy. It is a ATI shell holder. and the instructions that come with it are very easy to follow. I am not handy at all and don't own many tools, and I was able to put it on in about 10 minutes.

  • @JacksonShredder138
    @JacksonShredder138 13 років тому

    thats a nice 88 . I just bought one and put a hogue pistol grip in it....my 88 just has a single action rod so i couldnt attach the hogue forend, solid gun at a great price !!!

  • @riflemanm16a2
    @riflemanm16a2 14 років тому

    It's nice that shotguns are so affordable so you can use the money to accessorize. Maybe I missed it, but how much did you pay for the side saddle? I want to get one for the Mossberg 500.
    Oh yeah, funny thing: I was searching for something on a gun forum and I saw a post from you about your CZ 75B. I guess the internet is a small world. lol.

  • @mg43p18
    @mg43p18 12 років тому

    OK man thanks ....now its time for some upgrading ....ill send u some before and after when I'm done

  • @The4pears
    @The4pears 12 років тому

    Is the ATI buttpad thick enough or what was the thing you didn't like about it?

  • @Nick-Stewbreeze
    @Nick-Stewbreeze 5 років тому +1

    I think I just want mine stock for what I got it for.

    • @goatguns6910
      @goatguns6910 5 років тому

      Long barrel or short?

    • @Nick-Stewbreeze
      @Nick-Stewbreeze 5 років тому +1

      @@goatguns6910 mine is the 18.5 inch barrel. Wanted it for my home, on a budget raising a family.

    • @goatguns6910
      @goatguns6910 5 років тому +1

      @@Nick-Stewbreeze yeah it's a great gun for that. Theres a $25 heat shield on amazon that goes nice on that short barrel

  • @jermz999
    @jermz999  13 років тому

    @akadj1 Yes it is. Its my Mosin Nagant 91/30 7.62x54r. Good eye:)

  • @mg43p18
    @mg43p18 12 років тому

    I just bought one and I'm thinking of putting a heat shield.....what do u think

  • @jennysss50
    @jennysss50 8 років тому +1

    can a security Maverick 88 with a 20" barrel be replaced by a 26" or 28" barrel without changing the magazine tube?

    • @anassaultrifle3066
      @anassaultrifle3066 8 років тому

      yes there's one right next to me in the gun safe we live in. (he dont have an account yet)

    • @thelegalmexicanca9171
      @thelegalmexicanca9171 8 років тому

      you sure can

    • @jdsparks100
      @jdsparks100 8 років тому

      not if the magazine tube holds seven. Called Mossberg direct and the don't have a longer barrel for the mag tube of that size

  • @schizofrenzia1884
    @schizofrenzia1884 5 років тому

    I added so much useless crap to my gun just to make it heavier

    • @jermz999
      @jermz999  5 років тому

      Javier Evora just remove it. No shame if it’s too heavy for you.

    • @schizofrenzia1884
      @schizofrenzia1884 5 років тому +1

      @@jermz999 oh na i like it heavy i even added a makeshift bayonet

  • @Gumbie2009
    @Gumbie2009 12 років тому

    if anyone wants to go with a pistol grip go with houge tamer best one on the market hands down

  • @jermz999
    @jermz999  14 років тому

    @Highflyer2250 No extra drilling was needed. It seems like it might be a difficult install, But it was surprisingly easy. Involves taking out a screw here and there, But everything you need comes with the side saddle. Literally took me 10 minutes to install. Very easy to do.

  • @mikevicchiarelli2369
    @mikevicchiarelli2369 3 роки тому

    You, ummm, speak and hold the camera with all the confidence of someone who needs to own a couple cheap guns to feel secure

    • @jermz999
      @jermz999  3 роки тому

      My first videos, I was nervous. Thanks for the constructive feedback. LOL

    • @batfleckforever3594
      @batfleckforever3594 3 роки тому +3

      You, ummm, comment on UA-cam with all the confidence of someone who needs to sit behind a KY Jelly smeared keyboard to sound tough.

  • @jermz999
    @jermz999  12 років тому

    @wishaniggawould69 I dont think they have a tube extension for the Maverick 88. Or at least I have not seen one yet.

  • @NightOwl031978
    @NightOwl031978 12 років тому +1

    Thanks for the advice and tips. Just got my 88 today used for $156, I subscribed and thanks for the vids keep em coming.

  • @BonerWake
    @BonerWake 12 років тому

    how did you put the side saddle? did you drill some holes?

  • @tyler79durdan
    @tyler79durdan 12 років тому

    You can order an aftermarket forearm and once you get it you can measure to find out if it's 6 3/4 or 7 3/4 then order a mb 500 slide tube and nut of relative length. Inside tip ;)

  • @jermz999
    @jermz999  12 років тому +1

    @MRALANCJACKSONJR I got the heat sheild from cheaper then dirt. Its the ATI heat shield for the Mossberg 500. If it says its for the Mossberg 500, It will fit the Maverick 88.

  • @vtownhood
    @vtownhood 12 років тому

    Thank you so much. I have a maverick 88 with retractable butt stock, shotshell holder, camo cheek weld pad, sling, red dot and flashlight. I use it for police patrol and it is an excellent shotgun. The fact that is costs only 200 bucks is simply AMAZING.

  • @MrRocque
    @MrRocque 11 років тому

    the 'issue' with the fore end contacting the side saddle are caused by 'user error', not with the side saddle, by ppl installing it on a 'field' model that has an 'over lapping' fore end that, when cycled rearward, covers a portion of the reciever (like on hunting/fowl models). The problem its USERS trying to attach accessories NOT intended for their model. The onus is on the buyer to ensure the accessory fits/functions on their firearm.

    • @tmd11361
      @tmd11361 5 років тому

      I have that forend on my Maverick 88. I really don't care for the side saddle so it doesn't bother me that much. Plus the look and feel of my forend there's much more to my preference then the round corn cob Style. It also comes back a little further so it might make it more comfortable for smaller shooters or once with shorter arms.

  • @brachio1000
    @brachio1000 8 років тому +3

    I'm thinking about getting a Maverick 88. I'm a bit of a beginner, though, and I'm unsure about what barrel lengths are available and which one I should get. Any advice?

    • @jermz999
      @jermz999  8 років тому +1

      +brachio1000 depends On what you want to do with. If its strictly home defense go with which barrel length your comfortable with, Or you could spend a little more and get a Mossberg 500 and buy different barrel sizes to suit your needs. For home defense anything between 18 and 20 inch is a great length, But thats just my opinion. The 88 has been reliable and I've had no issues with it. I also have a 870 and 500 now. All great choices.

    • @brachio1000
      @brachio1000 8 років тому

      +jermz999: Thanks!

    • @Beltmaker09
      @Beltmaker09 8 років тому +2

      If you want it for home defense go with the 18 inch smooth lug berral if u r hunting like birds go with the 24 to 26 inch bird berral with removable chokes

    • @brachio1000
      @brachio1000 8 років тому

      Thanks!

    • @honestfirecaptain5262
      @honestfirecaptain5262 7 років тому

      brachio1000 Please find the video about the Mossberg drop problem. If you drop it from 8" or more a pin in the side drops out of the hole. Moving the forend slightly forward and back will reset it. Forcing a full stroke in this condition will jam the gun requiring disassembly.

  • @runhorun
    @runhorun 13 років тому

    @jermz999 how much for the pistol grip???

  • @jermz999
    @jermz999  12 років тому

    you shouldnt have to drill or tap anything, are you talking about what you need to install the side saddle?

  • @jermz999
    @jermz999  12 років тому

    Its a TacStar side saddle.

  • @MrRocque
    @MrRocque 11 років тому

    actually, the explanation is EASY. If you open the action then look inside you'll see the ejector. Its held in by a SCREW. THAT'S the screw he's talking about. Its replaced with a longer screw that will be proud of the reciever (on the left side) and allows for the saddle plate to be mounted to the left side of the reciever. See, EASY.

  • @jermz999
    @jermz999  13 років тому

    @dasdew2 Its an Sprinfield Model 15. Its an old single shot 22lr.

  • @jermz999
    @jermz999  13 років тому

    @dasdew2 I dont know much about their pistol grip, but I hear good things.

  • @jermz999
    @jermz999  13 років тому

    @billieveable It was 90 bucks plus shipping.

  • @damiion666
    @damiion666 11 років тому +2

    Why can't mossberg make their 18.5 inch barrels with a longer tube to be able to hold at least 6 shells? I don't really want to swap the barrel out with a 20 inch for the sake of adding more shells.

    • @calebroberts7067
      @calebroberts7067 5 років тому

      I think it's because of the 28" barrel model. The 28" barrel is interchangeable with the 18.5". So to Mossberg, making a model with a longer magazine tube would be a "loss of money". Kinda sucks. Wish they did have a longer magazine tube that would be ~18"

  • @wildbill1230
    @wildbill1230 6 років тому

    I would like to add a scope/lazer combination on my maverick 88. Any suggestions?

    • @1_Bunting
      @1_Bunting 5 років тому

      Optics planet has the war hammer rail to accommodate your needs

  • @jermz999
    @jermz999  12 років тому

    It mounts by removing the trigger housing pin. Also one screw is removed from inside the chamber. The side saddle attached though the replacement screws you are provided with in the kit. Its kind of hard to explain, But you should be able to find a youtube video of someone installing theirs. Good Luck.

  • @RaHeru1
    @RaHeru1 8 років тому

    will the deluxe halo heat sheild with ghost rimg for a 870 fit a maverick 88

  • @jermz999
    @jermz999  14 років тому

    @Ramos2905 Thanks. My buddy has the ATI folding stock. Although it looks cool when folded. Shooting it while the stock is extended kind of hurts. I still wouldn't mind getting one for myself. He really likes his. I probably would have gotten the folding stock if I hadn't had found this stock on sale.

  • @jermz999
    @jermz999  12 років тому

    The first time I put it on, It felt like it rubbed against the forend very lightly, But after racking it a few times it went away. It did not leave any marks on the forend.

  • @Eulicidcfinder1
    @Eulicidcfinder1 12 років тому

    i got mine at walmart for 183.85 after tax and it came with the 28 in barrel

  • @WVVan1
    @WVVan1 12 років тому

    Thanks for posting. Nicely informative.

  • @Salinas1al
    @Salinas1al 8 років тому

    quick question, have you had any issues with creep with the heat shield?

  • @Gumbie2009
    @Gumbie2009 12 років тому

    would you sell the shotforce?

  • @elliotshea2752
    @elliotshea2752 12 років тому

    nice mosin nagant beuatiful

  • @jermz999
    @jermz999  12 років тому

    I got it from their website. I am not sure where their store is located.

  • @vtownhood
    @vtownhood 12 років тому

    Does anyone know if you can still see the bead sight with that particular heat shield installed? Please answer back thanks

  • @jermz999
    @jermz999  11 років тому

    Hey, Sorry I dont have the original stock anymore. I would check midwayusa to get one.

  • @jermz999
    @jermz999  13 років тому

    @dirtyminded604 No It didnt. It stayed on through many shooting sessions.

  • @jermz999
    @jermz999  12 років тому

    I have tried the Hogue rubber pistol grip before on my friends shotgun and it felt great. i am not sure if they make a wood one, but hell. I've found weirder gun products before.

  • @darrenkim777
    @darrenkim777 12 років тому

    Yes you can

  • @jermz999
    @jermz999  12 років тому +1

    @Gumbie2009 You dont want mine, Its beat to hell, lol. I am actually putting it on my new shotgun and putting the KNOX stock on my 88 instead. It costs more, but its worth it in the end.

  • @paulamaro645
    @paulamaro645 7 років тому

    Do you know what kind of metal that heat shield is made of?

  • @TexasConcealedCarry
    @TexasConcealedCarry 12 років тому

    threaded choke ?

  • @KellyLynnNFM
    @KellyLynnNFM 11 років тому

    Hey sweet same model shotgun and a Nagant too. Nice. Looks fantastic.

  • @Joshmango86
    @Joshmango86 10 років тому +1

    I have a maverick 88 bought it brand new about 5 months ago then I went shooting one day it was cold. The forend broke right where it was pinned. No worries though I have a Mossberg 500 action tube slide coming

  • @jermz999
    @jermz999  13 років тому

    @gpsupersport Nope. Never gets in the way. I really like it.

  • @jermz999
    @jermz999  13 років тому

    @runhorun I got the pistol grip for 25 bucks.

  • @ShadowPlay1919
    @ShadowPlay1919 12 років тому

    I think he was commenting because the guy in the video should have said "Pre-Drilled holes" not pre holed drills

  • @jermz999
    @jermz999  13 років тому

    @FullmetaljacketJ No reason, I guess its just persoanl preference. I wasnt a fan of the way they look. Plus I had already had the regular heat sheild on it.

  • @704TACTICAL
    @704TACTICAL 9 років тому +5

    Good video just did a video with mine they are great guns

  • @jermz999
    @jermz999  12 років тому

    Nope, The side saddle went on my removing a few screws on the reciver. It was very simple to do and did not require any drilling.

  • @jermz999
    @jermz999  12 років тому

    I would check out the mossberg forums, some good info there and someone might have had the same issue as you. Wish I could be of more help, But my heat sheild has never moved when shooting.

  • @MustangGuy6501
    @MustangGuy6501 12 років тому

    buds here in lex ky?

  • @jermz999
    @jermz999  13 років тому

    @stallingbullet Your proabaly going to spend around 150-200 for a barrel. Check midwayusa . com

  • @sbisthname
    @sbisthname 12 років тому

    i just need a web cite that would have these products in stock,

  • @edccarry7340
    @edccarry7340 6 років тому

    Great vid love the 88 12

  • @kingphillipsarmy
    @kingphillipsarmy 11 років тому +1

    beautful mosin in the background