FOXWELL NT809 Bidirectional Scan Tool: bit.ly/3g335AA Code: F2UNC475 This scanner has like $30 off right now plus you get another percent off using the code above so I just put it in and it came out to like $416.33 with tax ..... normally the scanner is like a $500 scanner without tax This Is The Ancel s1000 smoke machine amzn.to/3hEKhIH
Great job. I had a similar issue with my F150. When I first got the truck, I replaced the EGR, the air filter and I removed and cleaned my MAS. Then it threw lean codes for both banks. I bought a scanner and and I did some research. My long term fuel trims were very high on both banks. I had to really think about what I did wrong so I retraced my steps. Turns out I didn’t have the air filter housing mated properly; it is similar to the one in your vid. It had a little bit of a gap in between both sides of the housing. So I carefully made sure both sides lined up properly then I clamped it together. Problem solved. Stay Blessed
Now obviously this was just part one normally I don't do part one part two but on this particular one I had to and I actually made an outro video to add to it but it didn't take in the editing app so tomorrow there will be a second part to this whenever the new EGR comes in and the new EGR tube
sharp eye on the egr.i didnt see it at first.between the two of them was enough to back up the data.thank god for smoke machines.wouldve been a bear without one.
The Econoline vans are the best they made and easy to work on too love my 98 Ford E250 remember you looked it up for me I been having higher Long term fuel trims lately though could it be the e15 u88 gas I'm using or possibly the manifold gasket isn't as tight as it should be I did the gasket job over a year ago now plus my coolant level is kinda down from where it was a smidgen above the max line on the reservoir bottle I'm dreading to have to go back in and redo everything especially being broke ASF too but I love my van and it's my only way to get around so I always take care of it
Nice video and explanations. We do so much work to make sure thay the P-codes and scan tools work for you guys. I am outside work at 6:00 A.M. to diagnose BCM issues that are messing up vehicles in the final hours before Christmas shutdown. I am shaking in my car in the parking lot with a decent panic attack. I am dealing with it. So many other engineers and suppliers messed up, and they are blaming it as "my fault". The issue has nothing to do with me. The lines are going down, and management is upset. The good engineers get dumped on so bad. I just want to quit, and I question why I am doing engineering work. It is awful. People like you that rely on us are the only reasons for me doing what I do. I am done throwing up, frozen puke in the parking lot. I have to go back to work, only to catch grief for others' mistakes over the last few years.
Well I'm at my wits end with OE new stuff lately, im about to give up on all new vehicle stuff. Lately it's been absolutely Terrible and im.just done with it. NOT your fault but the last 2 yrs and ruined my trust in new vehicle manufacturing
I had same issue replaced egr new egr dud the same thing replace valve cover pcv grommet ran great until covid didn't use van 2yrs. Used it twice last yr both banks lean again
Make sure you're exhausted up real good too if you have exhaust leaks on both manifolds that can cause lean conditions and that's a real bad thing with these vans
I do have the Foxwell NT809 as well, it is just awesome doing diagnosis and is very cheap for what it can do! I specialize in GM vehicles, but I did use the NT809 on several Renaults and even a Volvo S40. My only complaint is that it is slow reading Live Data on Fords that uses SAE 1850 PWM.
This was just part one I had an outro video saved but it didn't end up in the editing app and I will be putting in a part two tomorrow whenever the new part comes in even though I normally don't do that stuff I just do it all in one video but then this video would be too long
All those type of egr valves will leak a little during a smoke test. I guarantee that’s not the problem. Are the fuel trims high at idle and go down under throttle? If not it’s not a vacuum leak. It’s an Air metering or fuel delivery issue.
My 04 e350 idles but boggs down when I give it gas, I have to pump the pedal to raise the rpm. I don't have any fancy mechanical equipment, any help would be greatly appreciated, thank you
I had this same problem and when I did a fuel pressure test it ran 0 and started to start and die. Any ideas? I can still hear my fuel pump going in the tank when I start the car. Ive watched some of your other videos on the e350 and am trying everything. Great videos man
Good informar. Thank you for video. I have a 2011 e350 with code P0451 with a 5.4 I know not all cars are the same but if there anything commen with a for and this P0451 code? Inspected the FTPS and it is working as intended. Any help is much appreciated
@@FordBossMe thanks for the fast response. I did inspect the wiring and all is good with that. Going to perform a smoke test and see if I can spot a leak. Thanks again.
This issue I'm about to talk to you about it's off subject this one is dealing with a power drain on a 2004 Lincoln navigator for some strange reason before my battery dies I hear a faint click coming from the back passenger side. Please if you dealt with this issue before please enlighten me. Thank you very much!!! Happy holidays Merry Christmas and have a Happy New Year's may this year be prosperous for you and your family.
If you're hearing some kind of clicking sound that typically has something to do with the heating and air conditioning system inside the cab of the vehicle something like a blend door actuator or a fan I would think right
Also I forgot to mention my rear tailgate is not receiving power could that be related and the sound sound like it's coming from above the back passenger ceiling area kind of like the back door or ceiling run that area. Also I forgot to mention I don't have no freon in the system and I don't use the AC. Did this new information help my situation?
4:29 guys what is that piece called where the positive (RED) cable get terminated there ? does it come from the battery ? does it come from the alternator or starter ? why is it there in the middle ? also why no ground next to it ? i just bought a 95' v8 E350 and boy o boy am i missing a bunch of items under the hood...do you guys have like an online community where i can post a video and pics and ask you guys to help me repair it ? im mechanically inclined but more so shade tree than actual mechanic (i do all the maintenance and repair on my vehicles) thank you all for your time and consideration.
FOXWELL NT809 Bidirectional Scan Tool: bit.ly/3g335AA
Code: F2UNC475
This scanner has like $30 off right now plus you get another percent off using the code above so I just put it in and it came out to like $416.33 with tax ..... normally the scanner is like a $500 scanner without tax
This Is The Ancel s1000 smoke machine
amzn.to/3hEKhIH
Great job. I had a similar issue with my F150. When I first got the truck, I replaced the EGR, the air filter and I removed and cleaned my MAS. Then it threw lean codes for both banks. I bought a scanner and and I did some research. My long term fuel trims were very high on both banks. I had to really think about what I did wrong so I retraced my steps. Turns out I didn’t have the air filter housing mated properly; it is similar to the one in your vid. It had a little bit of a gap in between both sides of the housing. So I carefully made sure both sides lined up properly then I clamped it together. Problem solved. Stay Blessed
My heart dropped when you walked up to the locked door, been there done that
I saw that when Rich opened the door after the first scanning and thought, naw, that's not really locked!
Now obviously this was just part one normally I don't do part one part two but on this particular one I had to and I actually made an outro video to add to it but it didn't take in the editing app so tomorrow there will be a second part to this whenever the new EGR comes in and the new EGR tube
I replaced my whole EGR system a year ago
what year and liter of engine is this e350?
sharp eye on the egr.i didnt see it at first.between the two of them was enough to back up the data.thank god for smoke machines.wouldve been a bear without one.
I can't imagine finding that tiny leak at 13:00 without a smoke machine.
Nowadays you have to be part mechanic & part detective!
Indeed
Good catch. Having the right tools and experience really pays off.
The Econoline vans are the best they made and easy to work on too love my 98 Ford E250 remember you looked it up for me I been having higher Long term fuel trims lately though could it be the e15 u88 gas I'm using or possibly the manifold gasket isn't as tight as it should be I did the gasket job over a year ago now plus my coolant level is kinda down from where it was a smidgen above the max line on the reservoir bottle I'm dreading to have to go back in and redo everything especially being broke ASF too but I love my van and it's my only way to get around so I always take care of it
Nice video and explanations. We do so much work to make sure thay the P-codes and scan tools work for you guys. I am outside work at 6:00 A.M. to diagnose BCM issues that are messing up vehicles in the final hours before Christmas shutdown. I am shaking in my car in the parking lot with a decent panic attack. I am dealing with it. So many other engineers and suppliers messed up, and they are blaming it as "my fault". The issue has nothing to do with me. The lines are going down, and management is upset. The good engineers get dumped on so bad. I just want to quit, and I question why I am doing engineering work. It is awful.
People like you that rely on us are the only reasons for me doing what I do. I am done throwing up, frozen puke in the parking lot. I have to go back to work, only to catch grief for others' mistakes over the last few years.
Well I'm at my wits end with OE new stuff lately, im about to give up on all new vehicle stuff. Lately it's been absolutely Terrible and im.just done with it. NOT your fault but the last 2 yrs and ruined my trust in new vehicle manufacturing
nice find ,nothing like watching a Pro work
Sorry I shorted it
Eagle eyes, that's what you have, Rich. Nice catch.
I caught a glimpse and was like wait a second here I just seen that time to dive in
Wild great catch on that one!
Thanks!
I had same issue replaced egr new egr dud the same thing replace valve cover pcv grommet ran great until covid didn't use van 2yrs. Used it twice last yr both banks lean again
Make sure you're exhausted up real good too if you have exhaust leaks on both manifolds that can cause lean conditions and that's a real bad thing with these vans
I do have the Foxwell NT809 as well, it is just awesome doing diagnosis and is very cheap for what it can do!
I specialize in GM vehicles, but I did use the NT809 on several Renaults and even a Volvo S40. My only complaint is that it is slow reading Live Data on Fords that uses SAE 1850 PWM.
Wow. You got good eyes!
This was just part one I had an outro video saved but it didn't end up in the editing app and I will be putting in a part two tomorrow whenever the new part comes in even though I normally don't do that stuff I just do it all in one video but then this video would be too long
Hi, How can I get my 2019 F 150 transmission out of park with the push button start?
That engine bay is much more compact and that EGR valve is so rusted compared to mine
All those type of egr valves will leak a little during a smoke test. I guarantee that’s not the problem.
Are the fuel trims high at idle and go down under throttle? If not it’s not a vacuum leak. It’s an Air metering or fuel delivery issue.
Volts stays low off the hit
@@FordBossMe air metering, or fuel delivery. What the fuel trims do off idle will tell you if it’s got a vacuum leak.
My 04 e350 idles but boggs down when I give it gas, I have to pump the pedal to raise the rpm. I don't have any fancy mechanical equipment, any help would be greatly appreciated, thank you
I would like to see that tool ran through it's paces....
I took a blower and back blew my air filter coming back from MN try to get another several months out of it
I had this same problem and when I did a fuel pressure test it ran 0 and started to start and die. Any ideas? I can still hear my fuel pump going in the tank when I start the car.
Ive watched some of your other videos on the e350 and am trying everything. Great videos man
You got to verify fuel pressure
Good informar. Thank you for video. I have a 2011 e350 with code P0451 with a 5.4 I know not all cars are the same but if there anything commen with a for and this P0451 code? Inspected the FTPS and it is working as intended. Any help is much appreciated
So this was a dual problem this was an exhaust manifold leak issue and a EGR diaphragm issue
451 I have not encountered
I would suspect it could be a tank issue or wires or evap issue
@@FordBossMe thanks for the fast response. I did inspect the wiring and all is good with that. Going to perform a smoke test and see if I can spot a leak. Thanks again.
This issue I'm about to talk to you about it's off subject this one is dealing with a power drain on a 2004 Lincoln navigator for some strange reason before my battery dies I hear a faint click coming from the back passenger side. Please if you dealt with this issue before please enlighten me. Thank you very much!!! Happy holidays Merry Christmas and have a Happy New Year's may this year be prosperous for you and your family.
If you're hearing some kind of clicking sound that typically has something to do with the heating and air conditioning system inside the cab of the vehicle something like a blend door actuator or a fan I would think right
Also I forgot to mention my rear tailgate is not receiving power could that be related and the sound sound like it's coming from above the back passenger ceiling area kind of like the back door or ceiling run that area. Also I forgot to mention I don't have no freon in the system and I don't use the AC. Did this new information help my situation?
4:29 guys what is that piece called where the positive (RED) cable get terminated there ? does it come from the battery ? does it come from the alternator or starter ? why is it there in the middle ? also why no ground next to it ? i just bought a 95' v8 E350 and boy o boy am i missing a bunch of items under the hood...do you guys have like an online community where i can post a video and pics and ask you guys to help me repair it ? im mechanically inclined but more so shade tree than actual mechanic (i do all the maintenance and repair on my vehicles) thank you all for your time and consideration.
Face Book look FORD BOSS ME
What are those 2 holes for in the air filter housing ?
Unsure honestly
@@FordBossMe happy New Year Rich
Without starting the engine, sorry
Key on, hold brake and shift into neutral
It'll go just be careful or look in the owner's manual for the towing neutral procedure
Dang you working till late take it easy get you a drink bro
I was off by 430pm - I'm focusing on my health so no more staying late
Ok