P0171 P0174 Lean Codes
Вставка
- Опубліковано 25 сер 2024
- Here we have 2 examples of unmetered air causing lean codes on a Ford and a Chevy. Be sure to check out this Fuel Trim Video: • Understanding the basi...
For more information on automotive training check out www.handsonaut...
Equipment that I use:
TopDon Battery Maintainer amzn.to/40mubUw
Cardaq Plus 3 amzn.to/3Z9F3V1
Astro Meter amzn.to/402cIkJ
Break out box OTC amzn.to/41f0x3Z
Break out box Go Daig amzn.to/3nWCqsK
Quality Test Leads www.aeswave.co...
amzn.to/3LH5Vsc Pico 2205
Camera equipment that I use in the field
amzn.to/40jzpR2 - Sony ZV-1 Camera
amzn.to/40hchCA - Tascam Audio Recorder
Studio Camera amzn.to/3Jz7A0p
Studio switcher amzn.to/3MDU52v
I see that starter code (P06E9) all the time, it's always accompanied by a failed starter. Late model Ford starters are dropping like flies. Great videos, thanks for taking the time to share.
Thanks for the info on the starter code
Great video, thank you for sharing!
a little trick I learned the other day with Live Data, if you enter "fuel trim" in the search box, you dont have to search for them in the long list.
Or even the word "trim" should work
Yes thats right!! I am so old scholl when using a non pc scanner, and even then i do it the hard way sometimes!!
Thanks brother for the video great information as always.
You rock buddy.. Good work.. Keep it coming.💪💪💪
For a Po171 lean code we are looking at battery voltage, transmission, ??
Had a 2008 f250 today multiple issues. Fuse 74 blown goes to maf all o2 sensors intake runner control. Found harness rubbing through on the runner rod. Thought it was fixed looked at fuel rail desired vs actual and actual went down to 25 psi wot
Wow that's nuts, all the problems with the rubbed wires and still a fuel delivery issue. I bet it just started running bad LOL
Well done, you mention that fuel trims go to zero when maf sensor was unplugged. Is that because engine go to open loop
I meant to say they add up to 0. Taking away the computers ability to calculate the air flow takes away that computation for fuel delivery. So readings going to good with maf disconnected means that there is either a vacuum leak or undetected air ..
Hi Brian,
Could you tell me is possible to flash/update ECU using drewtech cardaq plus3 on Chrysler 200 2016 with a Green C1 connector?
Is the tooblox3 software is able to flash/update that ECU?
You should have no problem doing that. I just updated a 16 200 yesterday with my C3 plus.
Thanks for sharing Brian. Go cool off Lol 😊
You bet, It was HUMID!
Hi brother, I’ve recently had some issues with my LR3 and don’t know what to do now. I passed this vehicle down to my son for school and work and after a couple years just recently we started smelling fuel and it would hesitate to start. He was about to start college so we took it into a european auto shop for repairs. They stated it was a bad fuel pump and the repairs were done. The smell went away but after a couple weeks when I went to drive it for the first time after said repairs, I noticed it still hesitated to start and now it would also completely stall when it comes to a stop. If I slowly coast to a stop it will stay on. Did not want to take it back in so I replaced some part’s hoping that would fix the issue. I did spark plugs, Coil Pack, MAF sensor, air filter and cleaned the throttle body. This did not help and the issue still continued. It did however have missfires on both banks per the scanner I purchased and it got rid of all that. The only codes left are Lean banks 1&2. I took it back in to the shop where they said it was a bad Camshaft position sensor and after they replaced that they said it was a bad Crank case module. They made bith repairs and they said it was my starter or ignition. I told them not to touch those and I picked my vehicle up crom them. Still I was out the cost for those repairs. I then replaced the PCV valve, EGR valve, throttle body and did a injector cleaning treatment. None of these have worked. I am out of ideas and would like some help.
did you figure it out? thanks!
Hey just seen your video and like the scanner tool your using, If you dont mine me asking whats the model and # for the scan tool TopDon your using thanks indavance, Good Job
It's the top don pheonix smart
@@BrianMann216
Do you have like model# specific, thanks
What would be your best guess as to the cause of an intermittent P0174 on my 2008 Silverado V6? Most suspects seem to more of a permanent nature. Loose connector on a sensor maybe?
I would not expect a loose connection, nothing is impossible thoug.,That would probably set a circuit code for the affected sensor...
injectors failing or intermittently spraying weak
only on youtube it's almost always a loose or cracked hose. if only it were this EZ in real life.
I borrowed a friends newer Silverado and of course the check engine light came on I watched this video and it turned out who ever changed out the filter left one screws from the intake filter box half way and one clamp slightly loose I’m hoping that’s it other than that I disconnected the battery light disappeared praying it stays off