2018 Honda HRX 217 21 Inch Lawn Mower Will Crank but NOT START
Вставка
- Опубліковано 13 сер 2022
- In this video, I go over the steps I will take to find out why the 2018 Honda HRX 217 21 Inch Lawn Mower Will Crank but NOT START.
Gwinnett Lawns performs these services and others such as lawn care, crepe myrtle pruning, light landscaping, spring and fall cleanups, leaf removal in Lawrenceville, Dacula, Grayson and surrounding areas. Take a look at my webpage gwinnettlawns.com/. Check out my new Truth Social GwinnettLawns
#hondahrx217
#hondalawnmower
#mowerwontstart
Here are the items I used in this video.
Comfort Trim▶ amzn.to/3Nw6EtL
Tough Shins▶ www.tuffshins.com/
Equipment I am currently using:
-------------------------------------------------------------
Hour Meter▶ amzn.to/31k2RuG
Echo PAS 2620 ▶ amzn.to/2WCS4qS
Articulating Hedge Trimmer ▶ amzn.to/2TBd8fq
Echo SRM 225 String Trimmer▶ amzn.to/2MRmLV6
Honda HRX 217 Mower▶ amzn.to/2D4t3Mj
Echo PB 8010T Blower▶ amzn.to/2D32bfO
Edger Blades▶ amzn.to/2WaIX0f
Jungle Jims Mower Lift▶ amzn.to/2WjoZR0
DynaplugTire Plug Kit▶ amzn.to/31FDql2
Powertye Ratchet Tie Downs▶ amzn.to/2MpNcSL
Etrack section▶ amzn.to/2s6LhLH
Etrack mount plate▶ amzn.to/35RYjLC
Longacre Oil Filter Cutter▶ amzn.to/2R6Jct4
BigBoyJapaneese Saw▶ amzn.to/2Jzh9Sa
gwinnettlawns.com/
Helped tremendously!
Almost gave up on this thing.
Thanks for your help
It’s very pretty there
You’re very helpful and I watch your videos often
Good mechanic skills and fixing things cheap
So about 4 years old....just prepping for my hrn216vka...I run that thing like a commercial mower, lol
Good job. Never seen something like that. Briggs & Stratton are totally different. I have had a Honda mower since 2012. Still use it. I had to order the spring bracket for the drive spring. I also hit a steel water pipe last summer. Bent the blade pretty good. I took it to my buddies shop and he noticed it was shaking pretty bad. He took the blade off and gave the shaft a few whacks. Good as new. I bought a used HRX with the blade brake this spring for a back up. One owner, 1 year old. Previous owner wanted to go eclectic. Thanks for the video.
Great vid. Thx
I had a starting problem on my HRX 217, I verified all the basics as well and I recall seeing a small piece fly out last year while moving over a bumpy terrain. I finally figured out that it was the governor rod that snapped and flew out. Now it’s all good.
Wow man good thing this hasn’t happened to mine and it’s on 7 years with me and I’ve used the heck out of that mower transmission needed to be replaced at 5 years Honda covered it thank God cause it would have been a $300 repair that hydro tranny ain’t cheap but other then that it’s been a great mower in my company.
Excellent video
Best video no doubt thank you so much
Great video!!
Excellent Sir !
Where did you get the part from?
Good video 💥💪🇺🇸
Interesting video. My neighbor owns two of these & they always have problems of some sort. One not starting ' again ' . Will be taking a look at it in the next few days. Thumbs up your vid
Hello from N lawrenceville
How did you know to go to the valves (ohc) & not the carburetor? By they way the compression felt?
No, you can spray starting fluid in the carburetor, and if it doesn’t even attempt to start, and you still have spark, then you know the timing is off.
@@GwinnettLawns I think my HRX 217 is out of time then. I've tried everything. I will be taking the valve cover and inspecting components like you did. Mystery how it happened though! Great Video!
I have one of these that I love and I've done some repairs on it in the past but would rather have someone that knows what they're doing. Mine won't start right now. I live in Peachtree Corners (Gwinnet Co). Do you do repairs for others or have someone nearby that you recommend?
What about adding a little 2cly oil to tank to lubricant the valve stem as PVM
Common for them to jump time when this happens
I just don’t like these engines but have to work on them
What would cause it to jump timing like that?
Is there a tensioner on the timing belt? Timing belt wear (although the one in the pic looked quite new)?
In this case, it was because the exhaust valve froze cost to jump time. I did no damage and yes, the timing belt look brand new. Mower still running perfectly like it always has.
What is the valve clearance ?
.006" for intake valve and .008" for exhaust valve (cold engine).
Has anybody been able to find the adjuster screw for the exhaust rocker arm? Mine is pretty mangled and stuck in the old cracked arm.
Or does anybody know the part number
Might want to go to Partstree.com and check.
What do you think caused the enging to jump it's timing?
Probably because the valve train had a bit of a bind in it from the rocker arms, and I didn’t realize it until everything was back together, and I tried to start it.
@@GwinnettLawns thanks for the update.