MSD 2 Step on 5.3 TAHOE [PN 8733]
Вставка
- Опубліковано 22 сер 2024
- ROWDY msd 2 step on straight pipe
• MSD 2Step on 5.3 TAHOE...
Follow me on Instagram:
@gt__performance
/ gt__performance
Subscribe to my UA-cam:
/ gtsperformance
Want to send something?
GT
P.O. Box 1627
Rio Grande City, Tx. 78582
Contact Me:
Scyadaias06@gmail.com
#msd #texasspeed #knfilters
You sir just gained my trust but your Tahoe looks like a decepticon
Cool video, just a few facts for anyone else thats watching this. That's a police interceptor tahoe. Comes stock with reverse flow heads/water pump. It's also made to rev slightly higher and idle for longer (better oil pump and runs cooler hints the water pump and heads). Also is geared a little differently. They put down a little more power than your typical tahoe in stock form.
also comes with aluminum suspension compared to cast or boxed steel, Air ducts to cool down the front brakes, and is a few inches lower compared to stock. gives it a lower center of gravity for better cornering..
Everything combined makes this big & heavy Tahoe handle like you're driving a compact car
@@GTsPerformance I have a shift knob with a 12v momentary button in the side from speed dawg and it has a black wire coming out of the bottom not two connections like your switch how would I wire this up with the blue wire?
@Mason Wheatley it's just one wire, it's probably getting ground from the metal on the actual shifter.
You can use a test light to confirm.. Gator clip on power(+) and test light on the shift knob wire.. should light up.
If that's the case, simply connect that wire to the (blue) ground coming from the msd box (instead of the power like I used)
Royce speaks the truth. I have a 2013.
.. I have work to do.. but not much!
Holy shit this big pig hauls ars!
who asked 😅
That’s my favorite dancing move when listening to Cumbia music TEXAS 2 STEP
I love your vids bro. Hopefully one day you blow up. You are great at explaining everything and showing full details. I’ve been following for quite a while and the vids with v6 nation. Was looking for 2step and found yours!
Thanks for the small tutorial on the 2step for 07+ tahoe. 👍 definitely like to install this on our 07 tahoe and hear it when an exhaust 😁
Dang that tahoe is now a Texas 2 step! Watch out for you! Doing it Texas style, and I'm loving it. Seriously it's Beastly badassery! That turbo manifold cleaned up real nice. I know you had to trim some of it. It's gonna rock that lab rat!
What turbo manifold do you see here?
I'm getting ready to put this on , and a line lock for the front brakes .I have a few modifications myself . 2003 Silverado .040 over 5.3 LM7 stage 4 232/241 cam 243 heads 2.00 x 1.60 valves Holley 40lb/hr fuel injectors Harland Sharp 1:8 roller rockers . 2700 stall self tuned with HP Tuners .
This little gadget is fixing to make things more fun .
Nice build 🔥 what computer are you using?. I thought of getting hp tuners, but don't know squat about tuning
@@GTsPerformance get ahold of a phone app called LS droid,a computer program called Tuner Pro RT and something called OBDlink Lx.Will get you up and tuning for 60 bucks.Theres another computer program called PChammer that allows even more customization.Theres some awesome videos explaining it all in detail
Dang man thanks for showing this. I've been looking for instructions on one. I dont have one yet but its nice to have the info before hand.
Dude you can really explain your videos !! I subbed
Great explanation my g I usually don’t like to work on my car myself since I don’t wanna mess nothing up but you have a good ass explanation!
Awesome video man. Made my 2 step install for my turbo Silverado easy! Thanks ! Gained a sub!
I’m so brainwashed I can’t say 2 step without my brain going, ah 2 stepppp nah gone step hearing the song 😂😂😂😂😂
That's pretty simple set up... badass family vehicle
Perfect instructions. I’m gonna be doing this for my 69. Thank you sir 👍
I didn't know this was a thing but I am ordering mine for my 07 Tahoe right now from Summit Racing today!
It’s for racing 👍🏽
I figured that much 🤣🤣🤣
Lol 😂 "throttle the feather" that was funny. Good one bruh. 👍
That Tahoe needs some 373 gears higher stall converter and a lsd rear end. Maybe Holly intake manifold.
Ive seen the intakes.. thinking about it for later on.
And it comes stock with 373 posi rear diff.
Say goodbye to them cats😂
Depending on whether this is a fuel cut 2 step or spark cut. Most are fuel cuts, Sounds like one too. So his cats should be okay
@@MrPerfect409 spark
I don't have cats no more did a cat delete couple years ago😂
@@user-ix6le1ql8l lmao
I had it on my 2010 Tahoe with long tubes, catless y pipe, Carven TR exhaust and cutout and the thing was sick. Breaking necks all year long. Got tired of it so I just pulled the exhaust off and I’m about to sell my 2 step soon, same one in this video.
I have a 2012 ram 1500 Rt. I saw one guy that has a wot box on his to where you can do a rolling single pop and 2 step. His truck was able to do both but I don’t know how that would work on an auto
If you want single pops you need to get it tuned
My buddy wants 2 step in his tacoma told him I'd do it for him 😂
I know this is older. But I ran longtubes and a off road 3 inch y thru the stock muffler and tailpipe and it was quiet untill wide open.
I ended up dumping a 3 inch flow 40 before the axle and it's loud af
I wanted to put a cutoff and keep the magnaflow, but it's really tight on space.
Unless I move the magnaflow to where the spare tire goes..🤷🏻♂️
Yoyoyo just got one question the instrumental that's playn in the background is on point who is that from?
It's called Good Day
ua-cam.com/video/xqriOzkyZt4/v-deo.html
You should just add headers keep the exhaust setup you have and just add an electric cutout if you want it loud just open the valve it will sound sick
I'm looking at shorty headers. I know long tubes give more hp at higher speeds, but I prefer fitment. What I'm trying to figure out is either delete the cats or gut them out.. the 2step is something I want to keep messing with, but I need to get rid of the cats first.
I like the idea of the cutout also
@@GTsPerformance i say gut them out unless you know of someone that will pass you on inspection without cats
You can get rid of them but you’ll need a tune in order to pass inspection. I had long tubes and catless y pipe with a Carven exhaust and a quick time performance 3 inch cutout. Breaking necks all day every day!
Hey bro great video do you know if theirs a replacement for the blue wire
I noticed your low tire light was on, I had "problems" with that then figured out the computer was also reading the spare tire pressure =-/
Yea, I don't think the wheels have the sensors. I installed new tires not too long ago. CEL was there before, and still on now 🤷🏻♂️
@@GTsPerformance ask your tuner to turn that off
It's not a turning thing. The tpms system runs off of sensors in the wheel. You can get them for $100 a piece or less and almost every tire shop has a tool to calibrate tpms sensors. If you hold the lock and unlock button down on the key fob it will trigger the tpms learning system on those chevys and the horn will honk twice then once for every wheel that's calibrated, 2 more times when finished. You can only do it with a tpms tool.
@@roycewuzhere6544 or you can ask your tuner to turn it off
I know I can turn off the CEL with an ELM327 bluetooth scanner.. but tbh, I don't know about the TPMS. as far as I've heard, you Need the sensors or get used to having that light on.
Some ppl can't run those sensors on certain aftermarket wheels.. so the solution is to carry the sensors inside the car so that the computer can detect them nearby.
I could be wrong, but 🤷🏻♂️ I guess I just don't mind the light.
My launch control its neutral rpms @5500 then then drop it onto 1st gear tires at 20psi and bang diesel guys are like wtf just happend lol
Thats a sure fire way to fuck your shit if you somehow haven't already
@@CosmicGalaxyMC well he said "bang diesel guys are like wtf just happened" the bang was his transmission blowing up... Leaving the diesel guys wondering wtf just happened
@@extremepoweraddicts2978 gotcha gotcha, I read it weird I guess
ExtremePower Addicts 😂😂
I just put catless headers on my SS camaro im fully straight pipe im really thinking about buying this. What are some of the dangers of running a 2step at higher RPMs? Im wanting to run 4500/5000
Can this be added to a stock car without a turbo or supercharger
Hey bro u think u can help me i bought sane msd 2 step for my 5.3 but i already have it plugged i havent got the momentary switch installed or the blue white wire but the msd 2 is active its like its on any ideas i have checked the wires and dont have groubf wire install or blue white wire connected and still is on when i rev it its active any ideas thank you
What’s the purpose for the 2step launch controller ??
I recommend a thrush glasspack muffler
Nice vid bro. Ive been wanting to.do this to my 07 Avalanche built 5.3 txs spd stage 3 cam 3600 stall long tubes intake 243 heads ls7 lifters tune dod deleted.
Your truck is more than ready for one of these! 🔥🔥
@@GTsPerformance thats what im saying. I'm asking for one for Christmas gift lol
Need a vid imma do this to
Delete the maf, n the knock sensors
Do you have to buy a 2 step for your specific vehicle?
So blue in one side of the switch white to the other side???
I know this old video but can the engine or transmission fuck up?
This Tahoe would look seek drooped.
You should do a cut out
I did buy one, but came is smaller pipe diameter. Instead, I removed the magnaflow and straight piped it. Sounds better and louder. ua-cam.com/video/yp9j0W31qCI/v-deo.html
Also, I switched the 2 step from push button, down to the brake pedal and added an interrupter switch. I'll give it a go on another video
Will this part number work on a 09 yukon with the 6.2L?
What air filter and intake do you use
Whats the 2 step for if not for launches
Ok so I have a stock 2001 gmc Sierra 1500 SLE with a 5.3 what do I need
That is badass!
where did you get that roll of white wiring and what would it be called so I can look it up
you wont believe when i say this, but it's actually part of an old extension cord i ripped apart. the ends were damaged, but still have good feet of thick guage wire for stuff like this.
white, black & green :)
Can you use it in gear? I have a 07 ppv, hci and on a bottle and I think itd help a bit launching the truck
Yes, this 2step is meant for launch control. My truck is still running the original stall converter, so I can't put the launch so high.
Also, I wired mine to a push button switch so there's another (hold the launch button and release at the same time as my brake) step that I have to do, but.. having it connected to the brake pedal would make it easier. for launching. Just remember to put a toggle [on/off] switch to cancel the 2step in case you want to do a burnout, 🤷🏻♂️ or maybe so it wont engage 2step while in normal stop and go driving, every time you hit the brake.
Does this fit on a 2017 gmc yukon??
Can you activate this wile doing a burnout in a auto
What is the purpose for that part, what is it for?
What’s the small blue plastic with ends that’s screw off?
So did you buy it pretty much for show? I wanna get one for my Ram just to be funny and possibly obnoxious😂
Oh no, you can still use this with the stock stall converter, but you would get the most out of it if you had a higher stall .. something like 3200-3600
My stock stall is about 1700' so if I set the 2step anything after that , it will start spinning the wheels before it hits the 2step
God bless y’all
Dope but can I do it while driving
When you pushed the button on why did it sound like it was missing or is that sounds normal
To launch it
that's normal, holding on the 2step usually it pulls some ignition and makes it backfire like that
my truck has a fitech system, will this work with it?
Great vid! Subscribed 🤝
Thanks bro! 😎👍
Hey summit racing says thi won’t work with my truck says it’s for ls motors only. I know mines a derivative of an ls it has the LC9 5.3
It does work I have a lc9 5.3
Only difference I think is lc9 has 799 heads and is aluminum block.
What kinda v8 launches at 11k rpm
Could you provide a link for this?
so you got the tuned that cops get in their vehicles ?
is it posible that you lost the tune by unpluging your batery?
I added an aftermarket cam by Texas Speed, so there is a completely different tune now
Earned my sub can you leave a link to where you bought it
I got mine from Rich Desbian racing..
rdracinginc.com/shop/ols/search?keywords=Msd%208733&sortOption=descend_by_match
Man I have a 2001 Camry full bolt on with exhaust I wanna get the msd 2 step for it but not sure how to hook it up 😤someone help pls
Great video!
Where can I get a white wire and the switch
Will this work for a 1995 Nissan Altima?
"With the thing off" lol. Silly
Do you have the link for the part
Im subbing i fuck with this amazing
Audience, I was going to get the 2 step for my gt500, but changed my mind. I heard they can damage your engine after time of usage. I can 2 step by 60 footing any car on the street. I'm the tax collector all day everyday.
Technically everything can damage your engine if used in excess, but to each their own. I've had mine for years and still as fun since the first day.
You are about to let me make a bad decision right now
My name is clap king for a reason lol because I have 2-1/4" trua dual straight pipes but I want to 2 step
what is the radius of the disks?
What is the 2 step suppose to do? Never heard of one before
Nikola Tesla mostly meant for drag racing
So you can put the gas pedal to the floor to a set RPM and not over rev the engine also known as a rev limiter.
@@QQTrick1QQ that but it's meant for drag racing so you don't roast your tires off the launch lol
How much was it I wanna get it for our 06 chevy suburban it's got stock exhaust setup but hollow cats
Its about $250. Just search "msd 8733"
Can I do this on a 2010 Escalade ?
Would that work on my 2004 Silverado 5.3?
Yup, same one! 👍
Cool I mean I don't know that it is useful on a non turbocharged motor
Got the bread box to
Bro thanks foe the video... can this be add to an LT1? I have a Chevy Caprice Classic’96 with an LT1, will it work with that?
Yes, just look up "MSD 87331"
*for
Thanks brother my old car is in a million pieces ... I wish we could upload pictures here...
Where can I buy the 2 step and what's the price for one?
I got mine from rdracinginc.com/shop/ols/products/msd-ls-2-step-launch-control-2-step-rev-limiter-for-lsx-8733
with it being a automatic when u press the button do u hold the gas at the set rpm or do u put the gas to the floor
It'll 2step anything past the set limiter, so it doesn't matter if you're half or full throttle..
Yes set your 2step for say 2 thousand rpms and hold it to the floor and when the light turns green just push your 2step button and boom you'll launch
Man I know this video is a year old but that fuse or any fuse always goes closest to the battery. If your wire gets cut on the firewall you gonna roast it all the way to the battery. Just fyi
nice gauge style
Doesn't that thing have an ECU? Just software code it, get it mapped instead of some rotty box physically messing with your engine.
What’s the purpose of this when you are not running a turbocharger?
This works for both, turbocharged and na engines.
Is your truck stock
Yeah pretty much. Just a baby cam from Texas speed and k&n with moderate tune.
Can I install that on my 5.7 ram 1500 ?
This one is for Chevy LS engine, but I'm sure there is a 2 step for your truck.
I remember putting aluminum gum wrappers on my teeth too 😂😂😭 🙅🏻♂️
Sorry to hear that 💀
@@GTsPerformance you just did the outside? Was that cause ur teef were grinding down? Cause I’m thinking bout doing that cause sometimes I can feel sensitivity in my front teef tips
@La Violenta Yes, actually! My teeth are sensitive and delicate. I chipped a front tooth while sleeping and couldn't afford veneers, so resorted to gold. I've had these for about 8 years!
I know one day they'll wear out.. I just hope I can do something about it by then. 😕🤷🏻♂️
@@GTsPerformance looks like I’m 100% sure ima do it now, best to save what I can I don’t want to get rid of whole tooth and get fake shit drilled into my jaw lol
Do a launch 👀👀👀
Might sound really stupid but can you throw this on a bone stock lm7?
Yes.thats a factory harness In his Tahoe so the connections are plug and play for all 5.3
Yes
Whats the song?
How often should i change my coil pack man?? I have an 07 tahoe lt ??
Coil packs aren't part of a routine maintenance that you need to change out.
My truck is 13 yrs old, with 195k miles. Even if I replaced them now, they should be good for another 13+ yrs when the truck has 400k miles.
Okay thank you
What if u want to us rot for a launch how would u do that lol
In this video, I wired the 2 step to a momentary switch.
instead.. connect it to the brake pedal, just hold the brake and rev up your engine. When you are ready to launch, just release the brake.
how many miles were in the truck when you bought it
I think was around 180k
GT's Performance cool man I was wondering because I am trying to buy a Tahoe and do all the mods you done to yours and thanks bro great videos
I was wondering if I can 2 step my 4.8 engine for a 04 Silverado
Yea, its the same thing
@@GTsPerformance is the same one you have or a different #
Same one. MSD pn 8733
Why install it ir you can't use it?
Oh, I use it daily! Maybe not to its potential, but I definitely use it.
I'm still upgrading the Tahoe, and there's more parts to come. This was just one of those things on the list.
@@GTsPerformance why do you use it? What are you using it for?
@@GTsPerformance go turbo you will love it
If you are driving around on the street, you can 2 step next to someone you want to race (they'll know you want to race).. but for roll racing, it is pointless! It is meant for digs, and since I'm running a stock stall.. highest rpm I'll go is 2k, but a quick launch. I dont hold it too long either.
Like I said, more parts are coming and things will get better. You just have to know where you're at right now to really know where you're going!
Now that's an idea! But, this is still my daily! Ive been wanting to run a turbo, cam, big stall built trans. etc. But this Tahoe is heavy. I have a Silverado with a 6.0, but its 4 door and heavy too..
I would like to get a single cab and mod that one. Something short and light
Where can I find the 2 step ?
I got mine from rdracinginc.com
The plug n play for ls engines is "PN 8733", but you can do a Google search for your vehicle. rdracinginc.com/shop/ols/search?keywords=Msd%202step&sortOption=descend_by_match
🤘🤘
What is the porpoise of this device?
It cuts ignition at a certain rpm. Let's say, you set it at 3000rpm (example). You can push the throttle 100%, but this device will only allow your engine to rev to 3000, until you release your brake/ clutch..
It's a launch control used for race, but works even on stock engines.
@@GTsPerformance
You don't have install a transmission brake to make it works?
I might install it on my truck
No trans brake needed, but I will say.. if your car/ truck is automatic, the stock stall converter will be around 1600rpm so I'd advise if you are going to launch on a completely stock truck, not to set the launch higher than that! You can change to a higher stall (3000rpm etc.) for better launch.
@@GTsPerformance that is the plan swap my trans and satall to match my cam
Porpoise
How many of you people wanting to put this on your mom's Tahoe realize you're eventually gonna be spewing the guts of your catalytic converter out your exhaust by the 3rd day?
Haha, you have no idea! 😂😂
Even if that's so,.. hollowing the catalytic is better for the engine 💯👍
Sound like the motor is muffed up. I don't get it
Try listening to it with a louder exhaust
ua-cam.com/video/yp9j0W31qCI/v-deo.html
What’s the point of putting a two step on a vehicle with no supercharger are no turbo charger it doesn’t help your launch
Doesn't need to have forced induction to run a 2 step!