4 Sundown Audio X 12 inch Subwoofers on 8000 Watts!
Вставка
- Опубліковано 29 жов 2022
- 4:00 is when demo starts!
4 Sundown Audio X12 v2 Subwoofers on a Taramp 8000 MD.1 Amplifer with a 400 amp Mechman Alternator powering 2 D4S LTO 6.0 lithiums for my electrical
•
•
•
Amps:
(Taramp Md 8000.1 v2) www.amazon.com/Taramps-MD8000...
(Taramp ds 1200x4) www.amazon.com/Taramps-Channe...
Subwoofers and Speakers:
(Sundown Audio X12 v.2) www.down4soundshop.com/sundow...
Electrical:
(Rockford Fosgate T2 Compent Speakers) www.crutchfield.com/S-w2NLnHB...
(Mechman 400 amp) www.down4soundshop.com/amp/40...
(D4S LTO 6.0) 2x www.down4soundshop.com/2-down...
Demo is at 4:00
What size battery I
Do u have and charging system?
Best setup I’ve heard and felt! Hits real clean!
That is a very clean setup, nothing over blown nice wiring. 👍
Nice as hell bruh i really love that setup u did an amazing job on that bro nice
Great presentation on your equipment. Very nice.
Great Job! Its nice to see a clean car for a change.
i appreciate it man!
Clean looking rig with a sweet system. Jealous. Awesome job bud.
thank you man for real!
Very nice ! 👌 everything is perfectly done ✔️ and BOOMING 💥 💥 💥 💥
Setup is super smart, nice
One clean setup man! Hope to see more brotha 🚗🔊🔊🔊🔊🤘🏽😎🤘🏽
i appreciate it bro fr, will be keepin updated❗️
I love your set up bro!
Thank you man!
Phenomenal job bro!
Thanks man!
Bad ass set up bro!!
Thanks man!
That roof flex is a thing of beauty
Nice set up ,thank for the heads up an the shorter belt from ac delco i have a mechman 390 for my chyrsler 300 limited . Ready to install for my 3 lithium bat.s looks lile your hits good dude.
Clean setup, really nice. GREAT JOB BUD!! 👍 👌
Thanks man!
@@brentsounds SPL?
Clean! Great work
Thank you!
Nice setup! Got my box from gp tuned to 35 hz hits more notes but my 43 hz hits harder! Keep it coming brother 💯 💪
Thank you man!
With a tuning of 35hz do you ever have low notes that you are sad because they arent loud? Or does that not really happen? Im debating whether i should tune my box to 30hz or 33hz idk if 33hz will be too high or not. I wanna be able to hit hard down to 28hz.
@@bailey2517 my box i believe is between 32-35 the guy i got it off said 35 but i'm doubting it a lil, but I can play down to 26hz no problem and 26hz is still violent, as long as you got good subs and enough power 30 or 33hz would be nice, 33hz will probably play some higher notes a little better but if you want those lows go lower, your highs will still be audible but not crazy and the lows will just hit. It' depends on what kind of set up you have ofc, vehicle type, box placement, all make a difference, but should be like that
@@ryzenpeak Thanks for the response G 💪
I love the rebasses from EXCLUSIV Channel.
Clean setup bro
This video is amazing.
Thank you mason
Super clean bro
Appreciate it man!
Sweet set up bro
Thanks man!
Nice set up
appreciate it!
Sick build homie
Appreciate it man!
All around tight. Like the whole video bro. I haven't done a video but I have a 06 Yukon not the XL, 8 PRV 8's , 6 prv super tweeter,'s 4 Sundown X15's V2's, 80ah xs power bank, 1 270 mechman for the vehicle, & 1 400 for the bank alone, 2/0 runs from front to under vehicle, All SounDigital amps around 4 of them, but 1 SounDigital Evo-X 12k on bass, alot of stuff I didn't name but your system is on point as well.
I know that thing is loud
Yo. That set up is sick
Thank you man!
Amazing bro 🔥
Clean setup
much appreciated❗️
Right on dude!
Damn I only have one X12 in my car and it's loud AF. Cant imagine having 4 of them. Looks sweet, those bad boys are flexing hard.
Great job bro!
Thanks man!
Yeah buddie! I bet that's naughty! This has always been a fun and rewarding hobby, 32 years and running - I can't seem to escape it!
It’s is a fun hobby!
Clean setup man that thing really moves some air you should put a aftermarket radio in there maybe a pioneer or a Kenwood. Well keep up the good work and God bless you and your family 🙏 out and keep bassing on.
Planning on it soon, Thank you brother🙏
Looks good homie
Thank you bro!
Very clean setup show the flex on the outside
I appreciate it! Will be making a more in depth demo soon.
Badass setup, man !
Just slide a 3/4 board along the outer port wall to lower the tuning quick and easy .
Or you could do a nice rounded edge peice of wood on the inner port wall 💪😎🙏
Just trying to help out. Totally not complaining- Thats a way bigger sub system than I've ever had 😇👌
Those Sundown subs beating harder than a sundown town!
Those taramps are good
Bro yo subs slammin 💯💪🔥🔥🔥🔥🔥 damn you have nothing else to do & change yo shih sound good do more vids
Pressure 🔥🔥🔥🔥
It’s windy thanks bro!
Love yo system bro!!!!! Trying to get mine loud like dat one day 👍👍
Look at those woofers dance!!!😮😮
resilient sounds, small comp shop whose subs are top quality at awesome price points.
Thank you man!
resilent sounds okay very very very good. I’m a big fan of them there not known like sundown or deadbonce yet but they will be!
@@brentsounds I been checking them out myself. Next year I'm going to build a crazy system.
Looks good
Appreciate it!
300th like, 100th sub yw. God bless bro 🔥
Means a lot man I just saw it . God bless❗️
@@brentsounds ❤
Play - Quad Force Bass Challenge, the bass drop test . Old stuff but always never disappointed!
"bass from hell" - quad force
Do you have a line converter from the stock radio or you just running the high levels at the amp. Because damn, that sounds clean AF. 👌🏻😎
New sub! Very clean build bro.
We have similar set ups,I have the lto 6.0 to. If possible explain how how you hard wire to the charger to the batteries I have the same charger too,I'd like to do that too. Thanks bro ,keep up the good work I'll be keeping up with you every notification 💪
I really do appreciate it man, and i will make a more in detail video of how I did it soon, but basically just plugged charger onto the battery brackets (positive, negative) and have the power cord ram under my carpet to my under my rear seat to give them a charge just got to plug it into extension cord whenever. It does help maintain the batteries!
nice work
Thank you man!
Very nice. Great work. I like everything. Maybe not the RF tweeters. Very nice 👍
Yessir thank you! I’m with you on those tweeters they sound okay but they just look off.
@@brentsounds Remember though it's your system and if you it that's all that matters.👍🤛🤛
Get some skare super tweeters you will thank me later I'm running them now
high mids sound aswfull! bass hits hard
Sounds great all you need to do is get rid of that mechman and get an auto tech engineering alternator and your volts will hold. I have the same amp in my bronco and marvels hold at 14.8 and does not drop. I also have the voltage control that goes all the way up to 15.8 check it out.
Add 2 d4s super caps. Nice build 👍🏻
I appreciate it man, have some future upgrades. I will be posting updates!
Nice!!
That shit hitting 🔊
I have a similar setup but 4 - Xv3s and bass 8k. Same tune 29 HZ and that mid bass is dangerously loud with that song and rebassed Tennessee Whiskey
I love them man that’s a nice setup pretty much the same, and the rebassed tennessee whiskey is in my saved videos your not lying!
@@brentsounds it slams but I'm not satisfied honestly. I'm putting U 18's in my other truck for more of a louder build. I also rebass music. My channel is Rebass Junkie.
@@jahbeats5257 i’ll have to check it out!
dope
Thanks for sharing
Good video audio commentary demo editing tutorial of system
Pretty clean build, system, sound
It gets down 🚙🔊🔊💨B💨a💨ss
Thank you!
Awesome! With the factory head unit, I'm guessing you used speaker level inputs on the amp.
Yes, regular remote start and RCA’s then did all the LOC and step downs behind head unit
Nice I like it.
Thank you man!
Nice!
Thank you man!
Awesome setup. I'm confused why you'd have all of that in there just to keep the factory stereo?
Didn’t care to much about it before speakers wanted to do subs first. I will be doing one eventually
nice setup it all starts under the hood
It really starts at the radio, then go from there. Radio makes a huge difference
@@LeonD519 I’m talking about voltage wise
@@chamhadcoler5079 I agree with that 100 percent, sorry about that
Sounds good, but it definitely looks like you need to add at least a stripper pole for bracing or out right do Viber flex and/or wood on the roof before it starts to rip and getting rain leaks
100% agreed
muito bom! qual litragem da caixa ? esta sintonizada em quantos hertz ?
Get an after market radio it will be very mind blowing
For how much those d4s batteries cost you'd expect more than 3k watts a piece
You can give those subs way more power! You can slap two of those 8ks on there and run em at half ohm bro.
i’ve been wanting to throw some more power thinking about putting a 12k on for a little and see how i like it!!
I’d add another 8k
U could put an 8k on each of those subs lol
I have a Taramps bass 8 k on 2 sa 12 V3 dual 4s wired down to 1 ohm it slams 🤣😂
@@brentsounds honestly from the 8K to the 12K it's not going to hit as harder and louder as you would like I guarantee it. Honestly go straight to the 15K or get another 8K it'll be a decision you won't regret
Nice bro 💪💪🔊🔊💯💯
Thanks man!
That's beautiful bro! I got the Xv3 12's on a Smart Bass 5k. Gonna upgrade to Korean 8k soon tho.
your not gonna regret it, i love em for real i think i’m gonna eventually run 4k on each, they could defined take it!
@@brentsounds do you use a DSP? It made me get everything out of my amp that I could! I got a PRV one for only $100.
@@1ohmwrecker I do not use a DSP I do plan on running one, does it help the amp much more?
@@brentsounds yeah it helped me get so much more out of it. I've got a few videos. But probably cuz I use a Lc2i and taramps has terrible crossovers. So it gives me all the tuning I need.
@@1ohmwrecker the crossovers aren’t the best ima probably go with that prv i will make a video updating it
You just run that lto in-line with the agm? I have one just haven’t installed it yet. With 2 xspower d3400s. Clean setup btw!
Yessir as long as it’s a AGM under hood you can run any lithiums in Parallel with AGM no problem!
Have you clamped it? Also I have 4 x8s on a JP83 at one ohm. You need another amp
those things can take 10-12k watts those coils are beasts!
How did you wire your charger to the ltos
Nice to see a system done right! And not a plywood peach crate thrown in back with a rats nest of wires running on stock electrical. Awsome bro👍👍👍
😂😂 I feel ya on that got to do it right the first time
How come some videos i see of the x series subs say like "2 X-subs on an 8k" and in the video the subs don't move as much as they do in this video, even though you have 4 of them?? Those seem to be Really moving considering each one is only getting around 2,000 watts. Do you think an 8k would be more than enough for 2 Xv3-18s?
Why not make your angle of your port curve with no straight lines?
Nice ass build but bro I’m sure the x 15s might out do those four 12s.. correct box and amp on them 15s are just a different breed at .5ohm. Absolutely slap
SPL?
Do you have sound deadening ?
I have the x15 and I am planning on upgrading my amp and door speakers and wiring what is the best set up for a 2013 buick lacrosse
Find you a set of 8” midranges put em in each door with tweeters in each door. Get all OFC wiring and see what your voltage is like!
So I have a 12” sub with a 1800w audiopipe amp and I was thinking about getting a second battery how do I know which one to get ?
I would start if you need one, check to see if voltage is dropping bad and lights are dimming. If they are I would just get one d4s LTO lithium battery if you have a agm battery under your hood. If you have a regular lead acid battery probably would get a agm for your system. Probably a XS Power d3400 they are both good battery’s for holding power but not crazy amounts!
all 3 in coils?
Thanks for showing me this my voltage in park at full tilt is 14.6 to 14.5 only drops when I'm stopped at a red light probably because of the load on the engine?
my tahoe idles at about 600 RPM so i can stay above 13.3 at idle. but when i’m driving and my RPM’s go up it charges my batteries really fast never takes more then 3-4 seconds to get back to 14.8 V
@@brentsounds Working just fine then you have a lot of power compared to me I only have one bass 8k taramps on two 15 fi hc series?
Turn it down at stop lights.
Don't be that guy. No one wants to hear your setup.
@@mephInc That means everyone with a radio needs to turn it down because I can hear a factory system blasting at a red light and those are the worst ones full tilt nothing but distortion? Every day all day long
@@ceciljones1248
Yes. It's called being a decent human being.
What's it tuned to?
👍👍
You're running some high voltage for those LTO's and AGM. It's recommended to be ran at 14.4 for them both, and max for the LTO's at 14.8. I have 4 of the LTO's... and I'm running 14.8. Thinking about swapping them out for a cased LTO that can handle more voltage. Or getting a pcm controller for my alternator.
I don't suffer much voltage drop. Have never been below 14.6 and at the amplifier it shows 15. I'm running a deaf bonce aak 6000k to two avatar 12 inch subs.
Keep us posted. I wanna know if you run into any problems. Other than that, man. That thing is serious.
So far haven’t had 1 problem. At all. This system has done me perfect and the LTO’s recommend not being charged over 15 Volts so I haven’t ran into a problem
Badass system bro wat r u actually clamping I understand that amp does 9200 at 1ohm but the minute u start playing you get impedance rise so I know the subs aren't getting 9200 u should see what you rise too and how much power the subs r seeing love your build tho bro nice n clean
I appreciate it for real man, on my most recent video i made an update clamping around 4k👍
hi. can you do a hair trick with those 4?
1 more 8k and you'll be good man
some more power will be seeing the subs eventually!
Hello Brent, nice!!! One question, how the 4 soundowns are configured? The only 4 ohm bonina? Or dual coil? How are they connected to each other? Thanks for the information... best
they are dual 2 ohm each wired down to a 1 ohm load!
Wire the positive from one voice coil to opposite negative on each one, then all the remaining positives together straight to the positive on amp and all the remaining negatives together to the negative on the amp to get a 1 ohm load from 4 dual 2 ohm subs.
Change the box go low Like you want. Loud lows shits on high numbers Sounds good tho
Great set up do u think the amps u are runing are better than the audio pipe brand ?
I do, just because they make way more options, 2 channels, monoblocks, 4 channels. The price for them is really good I will be making a more in detail video on the amps!
@@brentsounds kool thanks for the input thanks a lot
I’m going to run 2 15inch bdc4 audio pipes on a 3k Smart Bass taramps amp what u think about that ?
@@708harveyworld3 I love audiopipe subs they sound really good when done right. Ive got video im posting tonight on taramps amplifiers!
Hey bro, question! How is that amp holding up? Considering on getting it!
Yessir as of month it’s doing perfect!
@@brentsounds Hey brotha, do you got a IG or Facebook? I would like to PM some questions I got on the amp and what ohm I can run it etc
How much did all that cost
What's your dimension's on your box? I like the set up!
I’ll get some better measurements, i know it’s 11.5 Cu
@@brentsounds awesome man I appreciate it! I got a 2007 Tahoe gonna and I'm looking to do a similar set up and I've been looking and looking and your box is one that definitely caught my eye! So just let me know when you get a chance homie, much appreciated!! 💪🏼💯👍🏼
Bro I have the new dual input md8k but mine looks different a lil newer I think mine on just 2 u15s though at half ohm…
Our voltage drops is about the same and I only have brandx 250a and a super bank 400a I’m surprised you drop down less than 14
sick mane, you should show a tape of you like 30 feet or more away so you can feel like the repercussion i guess ??
Yessir I appreciate it! I will be making a video for distance very soon.
@@brentsounds i love to hear systems from a far all the time in my area, like the best part of having one !!
Whats the dimensions of your box and port pls i have the same set up well almost i got 2 aak 6000.1s on mine.i just feel like my box is just alittle two small.just need a reference.thank.
I have my box right at 10.5 - 11 cubic feet after displacement, and tuned too 34-35, definitely would tune lower to like 30 tho. box is about 44 inch wide
Can someone please help me with my battery situation
Have you thought about doing a 4th order box?
I have, just haven’t decided what i wanna do for next box. I need to hear a powerful one in person!