New subscriber. U guys make it easy to follow and install the required parts, even a non-mechanically-inclined person like myself could do it. Also, just saw your web page, looks amazing! Do you guys have installation shop?
Thanks for the sub! We do not have an installation shop sadly but we do pair with shops local to you for installs! You can find more information on our site about the program. -Zach
Why didn’t you just drop the lower control arm ? You can slide the strut out without undoing anything else. All the extra work is completely unnecessary 😂
@@kevinoconnor2202 For what it's worth, I have a 23 with KDSS and have a 2" front 1" rear spacer kit similar to this and was dealer installed. No issues since.
Those are the Method Race MR703 Wheels in Gloss Titanium. You can check out a set here --> www.extremeterrain.com/method-race-wheels-104runner-mr703-bead-grip-gloss-titanium-wheel-17x9-12mm-offset-mr70379060812n.html
I just don’t understand the “concept” of leveling your 4Runner or truck. As soon as you load up with people and cargo, your front end is riding higher. Looks stupid and you’re killing the truck in terms of long term component reliability.
So just 2” lift in the front? What about rear? Does this cause reverse Rake? I heard people say ratio is 2:1 which means if you are lifting 2” in front the rear has to raise 1 inch. I’m confused or I needed only t1.5 in the front and keep the factory rear height..
That's not always the case. After we installed this on our 4Runner there was no squat to the rear. The shots of it in this video is with the kit installed and it sits very level.
Shop These Mammoth 2-Inch Front Leveling Kit ! : terrain.jp/3YYPdJI
I'm so amazed by the affordability of this kit. A SOLID deal on these two well made CNCed parts, properly chamfered and anodized.
Thanks for watching! -Zach
New subscriber. U guys make it easy to follow and install the required parts, even a non-mechanically-inclined person like myself could do it. Also, just saw your web page, looks amazing! Do you guys have installation shop?
Thanks for the sub! We do not have an installation shop sadly but we do pair with shops local to you for installs! You can find more information on our site about the program. -Zach
With 2” Are the differential spacers not necessary?
It bugs me that nothing was torqued to spec😅
Why didn’t you just drop the lower control arm ? You can slide the strut out without undoing anything else. All the extra work is completely unnecessary 😂
Does this rake also apply to an sr5 with 3rd row seats? It might lower the rear because of the heavy weight of the 3rd row seats?
Do these work with an after-market lift kit such as Old man emu kit with by pass reservoir
Is the 2024 factory take the same? I'm looking into leveling mine!
It is the same! -Zach
Do you need upper control arms? Seems like half the people say yes the other half no
I would recommend them if you have room in your budget! They'll help keep your ride quality smooth and get your ball joints to a better angle. -Zach
Does this work with KDSS? Does it have any affect on the KDSS system?
Wondering the same thing. My 23 has KDSS
Wondering this as well
@@kevinoconnor2202 For what it's worth, I have a 23 with KDSS and have a 2" front 1" rear spacer kit similar to this and was dealer installed. No issues since.
Do you need alignment for this much lift ?
We always recommend it after any sort of suspension modification! -Zach
With 2” Are the differential spacers not necessary?
What’s the wheels specs and does it have oem suspension?
It does have OEM suspension! Tires are a set of 265/70R17 BFG KO2s, wheels are Method Race Wheels MR703 17x8.5 with 0mm offset. -Zach
Too bad they don't have em' in stock
Does this compensate for driver side lean?
lol
The spacers are the same size so this may not eliminate the lean.
Kdss?
what size tires on the method wheels?
265/70R17 -Zach
What wheels are those? (The grey ones)
Those are the Method Race MR703 Wheels in Gloss Titanium. You can check out a set here --> www.extremeterrain.com/method-race-wheels-104runner-mr703-bead-grip-gloss-titanium-wheel-17x9-12mm-offset-mr70379060812n.html
I have the same exact wheels... love them and haven't stopped loving them since I put them on. Best looking wheels I've seen for the truck in my view.
I just don’t understand the “concept” of leveling your 4Runner or truck. As soon as you load up with people and cargo, your front end is riding higher. Looks stupid and you’re killing the truck in terms of long term component reliability.
So just 2” lift in the front? What about rear? Does this cause reverse Rake? I heard people say ratio is 2:1 which means if you are lifting 2” in front the rear has to raise 1 inch. I’m confused or I needed only t1.5 in the front and keep the factory rear height..
That's not always the case. After we installed this on our 4Runner there was no squat to the rear. The shots of it in this video is with the kit installed and it sits very level.