Is anyone else old like me, and remember the early to mid 2000's when we could overclock CPU's like the Core 2 Duo E6300 from 1.8GHz to 3.8 - 4GHz? They were the best days to be a PC enthusiast and overclocker.
@@joanhernandezciriza3797 The 920 was an awesome CPU mate. I seem to remember people literally trying to fry them with o/c but it just kept going and going. No fancy fish tank cases, no RGB, no cable management... All that mattered was pushing everything to it's absolute limit and showing off your PC's o/c performance at LAN parties.
The athlon xp thoroughbred rev b 2700, the athlon XP 2500 Barton core, e6400, q6600, i2500k, phenom 2 that unlocked the extra core. Those are some of the CPUs I owned that were great oc'ers.
@@GlennsHardWired You mean 40MHz? HAHAHA.... I get what you mean mate. That's impressive. I remember attempting to overclock a 486DX4-100 to 133MHz, but couldn't get past 120MHz. But that was very late 90's (maybe even 2000?) so not exactly during the height of the 486. My first PC was a 386SX33 so respect to you for still having a working one.
It's good to see we can now O/C the X3D chips, but the good old days of overclocking are well and truly gone. And you are right when you say it's the companies. They simply don't make chips with high O/C margins in them. Going back to days of the Intel Core 2 Duo E6300 that could go from 1.8GHz to a crazy 4Ghz will never be seen again, unfortunately. The early to mid 2000's were by far the best days to be a PC enthusiast.
you need to go back and find the scalar and set it to 10x, it will give the cpu JUST A BIT more voltage and allow it to actually boost decently higher. scatter bencher was able to get over 5.7GHz on water.
@@Dante_S550_Turbo thats absolute nonsense, there are plenty of reviewers who got samples and they clocked like shit. not to mention his clocks are also ass because really he only did the bare minimum. if you work on the OC for a while and really tune the settings in the bios you can get 5.7GHz fairly easily.
@@thelasthallow pbo enabled and pbo advanced settings changes nothing it will always go up to 5.425-5.45ghz. if you use scaler and down volt a bit you only get slightly higher average clocks under heavy load, 5.2-5.35ghz. instead of 4.9-5.0ghz. Hitting 5.7ghz under load is going to take a heavily binned cpu.
@@thelasthallow i'm very busy but i am trying to work on breaking past the pbo barrier, while maintaining 1:1 mlck, uclk 2167/2200fclk stability. it's time consuming to say the least.
Man I've been on Intel for years, and now with Arrow lake out they've made it complicated lol.. Been reading up on the overclocker forums, and lots of people are a bit confused on what the best method to OCing is. Intel changed quite a bit of settings. As for AMD it seems like a lot of the PBO overclocking pretty much outta the gate works pretty good. Straight forward and fairly simple. I'm still waiting for CES and the RTX 5090 along with the 9950X3D release before I make any decisions for my new build. Kinda hoping for more options to show up for motherboards, CUDIMM, and maybe finally CAMM2 as well.
For my first pc build ima get this cpu instead of the 7800x3D one I saw a article about it like 9hrs ago saying it would even be cheaper then the last one so that’s a steal
Quick question from a new to the PC world builder…. I currently run a Ryzen 5 7600X CPU and a Radeon RX 7700 XT GPU. Would you say this is a good pairing? When I am running games it usually shows as GPU usage as around 90-100% but the CPU at around 2-7%. Is that a good ratio for the usiądę or should ideally it be a different percentage? Thanks in advance! 😊
Wow, 9800X3D makes the 7800X3D look like an Intel Celeron by comparision I didn't believe that was EVER possible. Thanks AMD Ryzen and Apple Silicon, for engineering the impossible regularly!
Also rather than +200mhz overclock. Simply do a -ve curve instead, this will give you even more lower temps and its not going to risk your cpu by overclocking degradation.
I have also -30 all core undervolt and in Cb R23 it draws ~120W (stock 140W) and temps are much lower and don`t hit the 95C limit with NH-D14 noctua cooler. Also seems to be stable as a rock now.
@@anttikoponen5040 I went from 145 watts in R23 down to 115 and temperature dropped from 85C down to 68C but my score increased by 500 as all 8 cores were locked at 5225 MHz. Gaming wattage and temperatures dropped quite drastically too!
Hey PC Centric, your guide on overclocking the Ryzen 9800X3D with the RTX 4090 was super detailed! You make complex setups easy to follow. I’d love to chat about how my agency can help you with brand partnerships, so you can keep focusing on these awesome PC builds!
i know its a fucking disgrace there is stock a few places awd has it for 490 and ccl for 520 but thats more than msrp which noone should do!!!!!!!!!!!!
sounds to me like overclocking is only good for those people who love getting benchmark scores. seems quite pointless since this chip and any 4000 series gpu and up is going to make gaming very very smooth.
everyone overclocks with positive boost clock, its far better to lock the cores and do an all core locked overclock. your lows will thank you. got mine running at 5525 all cores locked and its crazy
@@TheUltraMinebox I'm running a 360 mm lian li aio. Temps still stay under 80 max. Voltages max out at 1.225. I can most likely go higher and will try for more
You would be great even with a 7700x if value is all you're looking for, it's hard to bottleneck even that processor by itself. You could even try and squeeze more budget with a 7600x, but I don't think it's worth it. But if you want to "future-proof" your system a little more, then get the 7800X3D, especially if you can find it at under 400, at that price bracket it is a much better value than the 9800X3D
my old 9700k I just enabled asus mce and let it cook 😊 I tried overclocking it so many times but I’d always get instability from 4.8-5 even with avx offset But somehow with asus mce putting less voltage and pushing all cores to 4.9 under load it’s never crashed once on me. ai overclock also seemed to think that it could handle 5.4ghz no avx offset 😂
Could you please tell me what is the overlay software you are using to display the metrics? I've been using riva tunner with msi afterburner but yours looks different.
There is no blanket "nah" - depends on what framerate you get and what you play...I swapped out my 7700x for the 9800x3d yesterday. I did this because I also plan to swap out my 4080 for a 50 series when it arrives.
Don't limit yourself just because you see UA-camrs using a certain AIO. There are a lot of different AIO options these days at varying prices and even some of the cheaper ones are far superior than the H150i.
If you are playing games that require more cpu horsepower, then yes. I recommend nvida's frameview software, simple overlay, just run the program, open a game, and see if the games you are playing are getting 95-100% gpu utilization.
yes it is, 5700X3D is the best you can get without buying the 5800X3D that's a lot more expensive for kinda the same performance. So depends on what games you play your resolution and card you are running mate
Is it overkill or stupid move to upgrade my R5 5600x to r7 7800x3d if i get the mob and rams in a bundle for cheap? I have 3080 gpu and I have planned to upgrade it after the prosessor and mob etc..
@@onder6063 I mean im not going to upgrade like straight away but like in 1-2 year after the 5000 series are out.. So there is no bottleneck you think?
@@laflame.-tv I have not used x870e boards personally. But I am familiar with msi boards. And have good personal experience with. I like the bios menu.
why in every video soon as u put ur hand to a desk monitor shakes like crazy how would you even play games is that desk so weak you hitting desk on purpose or is every monitor stand in all the vides of bad quality what is happening there with every monitor shaking like ship on ocean, Id get annoyed if mine did that for sure
Am I missing something, I've got a 14900K and rtx3090. When I run the performance stats on black ops 6 (running at 4K on ultra settings) my CPU is running at about 20% to 30% and my GPU at 99% so how is this CPU going to make my machine faster if the CPU is not being pushed at all anyway?
PC building this is my first and please let me know for any suggestion. It would be much helpful for 1440p gaming Ryzen 7 9800X 3D Upto 5.2GHz- AMD Processor MAG B650 Tomahawk WiFi or Asus Rog Strix B650E-E Gaming Wifi Am5 Atx- MSI motehrboard Corsair iCUE H150i Elite LCD- Crosair CPU cooler Trident Z5 NEO RGB (AMD Expo) 32GB (2 x 16GB) DDR5 6000 CL30-38-38-96 - GSKILL RAM RTX 4070Ti SUPER Trinity Black Edition 16GB - ZOTAC GPU Western Digital Black SN850X-1TB - SSD RM850x (2023) 80+ Gold Modular - Corsair PSU Hyte Y60 or HY70 case MX-4 High Performance Thermal Paste (FOC)
Has the 7800x3d come up short yet? Do you need/want/must overclock beyond a some CO, slight and positive override on PBO? If yes to one or both- probably worth it. Otherwise youre set. 7800x3d is amazing. It wont overclock well. It will squeeze out on average 8-11% less fps across a sample of games. If thats worth the trouble of finding a good 9800x3d and sell the 7800x3d (plus the hassle of removing and installing components) is really up to you. I dont think so. Oh! Also maybe youre doing more editing or such- then yea the 9800x3d makes sense. But then it might make most sense to wait for 9950x3d if you want more “production value” out of an x3d chip.
No the 7800x3d has been perfect and i do nothing but play FPS games nothing else. Is more of I want it. Cause I get for the way a previously stated who knows if later in I can get and upgrade for basically 50$
That depends on different factors.... Do you play at 1080p (hopefully not)? What GPU do you have? What type of games do you play? Is $50 a lot of money to you? Depending on those factors, it could be could either way.
Plenty of stock. Could have gotten multiple at this point. People just don't know how/when to look. Got mine right on release and it was in stock for 30-40 minutes before the demand overtook supply and it's constantly coming back in.
Lol and he shows 1080p numbers ...1 % will buy that chip for 1080p so the fps is irrelevant....stable is something this chip is struggles with it's has bad dips in 1% lows just like the 7800x3d
'Ladies and gentlemen, unless you've been living under Varrock, chances are you have tried running Runescape 3 in 4k all ultra on 9800X3D'
OSRS at 4k 240fps
Is anyone else old like me, and remember the early to mid 2000's when we could overclock CPU's like the Core 2 Duo E6300 from 1.8GHz to 3.8 - 4GHz? They were the best days to be a PC enthusiast and overclocker.
oh yes great times. I remember i took my i7 920 bloomfield from 2.9 to 4.2 ghz. I was getting like 70% more performance playing left 4 dead.
@@joanhernandezciriza3797 The 920 was an awesome CPU mate. I seem to remember people literally trying to fry them with o/c but it just kept going and going. No fancy fish tank cases, no RGB, no cable management... All that mattered was pushing everything to it's absolute limit and showing off your PC's o/c performance at LAN parties.
The athlon xp thoroughbred rev b 2700, the athlon XP 2500 Barton core, e6400, q6600, i2500k, phenom 2 that unlocked the extra core. Those are some of the CPUs I owned that were great oc'ers.
Still got an e4300 at 4.2 ghz. ...beside my overclocked 40ghz 386dx.... im that old schooled. 😊
@@GlennsHardWired You mean 40MHz? HAHAHA.... I get what you mean mate. That's impressive. I remember attempting to overclock a 486DX4-100 to 133MHz, but couldn't get past 120MHz. But that was very late 90's (maybe even 2000?) so not exactly during the height of the 486. My first PC was a 386SX33 so respect to you for still having a working one.
Sad to see new generation almost fully forgot about overclocking or maybe companies make it the way people dont get onto it. Time to get it back
It's good to see we can now O/C the X3D chips, but the good old days of overclocking are well and truly gone. And you are right when you say it's the companies. They simply don't make chips with high O/C margins in them. Going back to days of the Intel Core 2 Duo E6300 that could go from 1.8GHz to a crazy 4Ghz will never be seen again, unfortunately. The early to mid 2000's were by far the best days to be a PC enthusiast.
It's like the 20th "o.c." video I've seen that is just enabling people, which most mobos already enable automatically.... 🥴
It's just tuned very well out of the box
you need to go back and find the scalar and set it to 10x, it will give the cpu JUST A BIT more voltage and allow it to actually boost decently higher. scatter bencher was able to get over 5.7GHz on water.
he got a reviewer cpu, so heavily binned.
@@Dante_S550_Turbo thats absolute nonsense, there are plenty of reviewers who got samples and they clocked like shit. not to mention his clocks are also ass because really he only did the bare minimum. if you work on the OC for a while and really tune the settings in the bios you can get 5.7GHz fairly easily.
@@thelasthallow pbo enabled and pbo advanced settings changes nothing it will always go up to 5.425-5.45ghz. if you use scaler and down volt a bit you only get slightly higher average clocks under heavy load, 5.2-5.35ghz. instead of 4.9-5.0ghz. Hitting 5.7ghz under load is going to take a heavily binned cpu.
@@thelasthallow i'm very busy but i am trying to work on breaking past the pbo barrier, while maintaining 1:1 mlck, uclk 2167/2200fclk stability. it's time consuming to say the least.
Yea but he used ECLK from mobo. Pbo allows a 200 mhz offset. Max oc with pbo yields around 5.4 if you dont have an eclk mobo.
-25 is where mine taps out and freezes 5 minutes into cinebench, but still a pretty nice boost with -20, and totally stable (x670e board, though)
Man I've been on Intel for years, and now with Arrow lake out they've made it complicated lol.. Been reading up on the overclocker forums, and lots of people are a bit confused on what the best method to OCing is. Intel changed quite a bit of settings.
As for AMD it seems like a lot of the PBO overclocking pretty much outta the gate works pretty good. Straight forward and fairly simple.
I'm still waiting for CES and the RTX 5090 along with the 9950X3D release before I make any decisions for my new build. Kinda hoping for more options to show up for motherboards, CUDIMM, and maybe finally CAMM2 as well.
that's a lovely machine you have
Thanks appreciate your videos
For my first pc build ima get this cpu instead of the 7800x3D one I saw a article about it like 9hrs ago saying it would even be cheaper then the last one so that’s a steal
Quick question from a new to the PC world builder….
I currently run a Ryzen 5 7600X CPU and a Radeon RX 7700 XT GPU. Would you say this is a good pairing?
When I am running games it usually shows as GPU usage as around 90-100% but the CPU at around 2-7%.
Is that a good ratio for the usiądę or should ideally it be a different percentage?
Thanks in advance! 😊
Wow, 9800X3D makes the 7800X3D look like an Intel Celeron by comparision I didn't believe that was EVER possible. Thanks AMD Ryzen and Apple Silicon, for engineering the impossible regularly!
Now buy a graphic card to play games… fly away!
What motherboard are you using?
Also rather than +200mhz overclock. Simply do a -ve curve instead, this will give you even more lower temps and its not going to risk your cpu by overclocking degradation.
rx 7900 xt good for this cpu? Bout to order one
im a rock that's living under it
-30 all core undervolt is all you need with the 9800X3D. It’s night and day different now!
You can now use asynchronous bclk and curve shaper. Why would you only do an undervolt? The chip is capable of really high boosts.
@ I’m trying to prioritize less wattage and efficiency.
So only touch that and nothing else he did in the video? I’m new to over clocking. I have the same cpu and mb he does in this video.
I have also -30 all core undervolt and in Cb R23 it draws ~120W (stock 140W) and temps are much lower and don`t hit the 95C limit with NH-D14 noctua cooler. Also seems to be stable as a rock now.
@@anttikoponen5040 I went from 145 watts in R23 down to 115 and temperature dropped from 85C down to 68C but my score increased by 500 as all 8 cores were locked at 5225 MHz. Gaming wattage and temperatures dropped quite drastically too!
Great video! Now if Bench Marcus and Bench Karl could do a collab! :D
With housing costs as they are a rock is the best tiny house available..
Awesome!
So in conclusion, if you are cpu bound the gains are better?
Yee
What motherboards would you recommend for overclocking the 9800x3d? I got a b650e-f but im a little worried about the power phase
Hey PC Centric, your guide on overclocking the Ryzen 9800X3D with the RTX 4090 was super detailed! You make complex setups easy to follow. I’d love to chat about how my agency can help you with brand partnerships, so you can keep focusing on these awesome PC builds!
please test warzone from now on 🙏🏼
He does test warzone quite a bit in his Build guides.
no stock on the 9800 anywhere in the UK been trying for the last week sold out in hours 🤬
You do not need this anyway you can buy more sensible options really your just paying a lot more for about 10 fps .🙁
@@Dave30867Unless you play tarkov. Its almost 30 lol
@@Dave30867 What would you recommend?
i know its a fucking disgrace there is stock a few places awd has it for 490 and ccl for 520 but thats more than msrp which noone should do!!!!!!!!!!!!
Luckily I had a microcenter nearby and walked right in and bought one. Just be patient and check frequently the chip is amazing!
sounds to me like overclocking is only good for those people who love getting benchmark scores. seems quite pointless since this chip and any 4000 series gpu and up is going to make gaming very very smooth.
A fun learning experience for enthusiasts. 😊
So, basically PBO didnt do anything other than substantially increasing power draw, right? That seems like not worth it to even enable.
mine crashed at -30 but is stable at -25, exact same result!
everyone overclocks with positive boost clock, its far better to lock the cores and do an all core locked overclock. your lows will thank you. got mine running at 5525 all cores locked and its crazy
1% lows you mean? Mind elaborating on this? Ty;)
5225 is stock all core boost clock no ?
Thats amazing. What cooler and voltage are you running at? 5.5 all core with this cpu sounds like gaming heaven
@@TheUltraMinebox I'm running a 360 mm lian li aio. Temps still stay under 80 max. Voltages max out at 1.225. I can most likely go higher and will try for more
@Isaacz3101 yes 5225 is stock, I got mine locked at 5525 now
Are you wearing your grandmas jumper?
No it’s your grandmothers
@@fatmike01 that would be hard she’s dead
Would I be better off getting the 7800x3d if my gpu is only a 4070 super or get the 9800x3d instead?
7800x3d 😊 better value
Depends if 7800x3d price drops enough
You would be great even with a 7700x if value is all you're looking for, it's hard to bottleneck even that processor by itself. You could even try and squeeze more budget with a 7600x, but I don't think it's worth it. But if you want to "future-proof" your system a little more, then get the 7800X3D, especially if you can find it at under 400, at that price bracket it is a much better value than the 9800X3D
I have an i7 9700k, and in my motherboard, it shows silicon quality at 97% bit I've never overlooked it as not sure how lol
I wonder how and exactly what is measured for "silicon quality".
my old 9700k I just enabled asus mce and let it cook 😊
I tried overclocking it so many times but I’d always get instability from 4.8-5 even with avx offset
But somehow with asus mce putting less voltage and pushing all cores to 4.9 under load it’s never crashed once on me.
ai overclock also seemed to think that it could handle 5.4ghz no avx offset 😂
Could you please tell me what is the overlay software you are using to display the metrics? I've been using riva tunner with msi afterburner but yours looks different.
I think that it's what he uses. Could just be a different layout.
Would you say its worth upgrading from a 5800X3D when using RTX 4080 and 1440P ?
nah plus you'd have to upgrade your motherboard and ram too
Upgrade from 3200 to 3600
There is no blanket "nah" - depends on what framerate you get and what you play...I swapped out my 7700x for the 9800x3d yesterday. I did this because I also plan to swap out my 4080 for a 50 series when it arrives.
@@LakerTrianglewhat's wrong with your 4080?
@joniqst too slow...I also have 3 other PCs in the family so it will replace a 3070 which will replace a 2080 which will replace a 2060S.
I actually got 5-12 fps LESS from doing this
Can you lock the Voltage on the 870 bords ? Like on the 570 bords ?
Please tell me about the AIO TITAN cooler, should i purchase it over the H150i? and why?
The H150i is a older cooler, their are far superior options.
Don't limit yourself just because you see UA-camrs using a certain AIO. There are a lot of different AIO options these days at varying prices and even some of the cheaper ones are far superior than the H150i.
i have a CPU
AMD Ryzen 5 5600X 6-Core Processor with a b450-hdv mother board is it worth upgrading to AMD Ryzen 7 5700x3d
If you are playing games that require more cpu horsepower, then yes. I recommend nvida's frameview software, simple overlay, just run the program, open a game, and see if the games you are playing are getting 95-100% gpu utilization.
Kind of, why not just get a 5800 though?
yes it is, 5700X3D is the best you can get without buying the 5800X3D that's a lot more expensive for kinda the same performance. So depends on what games you play your resolution and card you are running mate
I see in warzone it deeps, like the 1% they go to 131, how you feel in the game ? Like stutters or are not noticeable
If the stutter is above the monitor refresh rate, it's not that bad.
under 10 minutes gang
Worthy of a highlight comment
Poor wife.
Yall lasting minutes? Dang it….
Maybe with better cooling it could reach 5.45ghz em be stable at -30 co
Sorry for beginner question but how do I get to the extreme tweaker menu? All I see is AI Tweaker in my BIOS
Can anyone help with this?
Is it overkill or stupid move to upgrade my R5 5600x to r7 7800x3d if i get the mob and rams in a bundle for cheap? I have 3080 gpu and I have planned to upgrade it after the prosessor and mob etc..
Not at all, go for it
Not at all.
@@onder6063 I mean im not going to upgrade like straight away but like in 1-2 year after the 5000 series are out.. So there is no bottleneck you think?
Did you know your habit of hand gesture is actually doing real sign language? ...you said some offensive words by accident... 😂
the AMD dips is why intel will always win to a competitive player 93 at times is crazy smh
Userbenchmark 😂
Do I sense a bit of bias? Face it guy, AMD is the best right now, Intel is just sucking.
Bro is userbenchmark
Dips are usable caused by having Sam on
whats the best x870e board for this cpu? Not the expensive ones
This early on, there are too many great deals. From my searching, it's mainly just the top end boards with that chipset. 330 gbp or there abouts.
@daunted232 what do you think about the MSI MPG x870e carbon WiFi?
@@laflame.-tv I have not used x870e boards personally. But I am familiar with msi boards. And have good personal experience with. I like the bios menu.
X870E Nova has the best bang for the buck, it also doesnt half your GPU PCIE slot if you use a lot of M2 drives.
MSI? And then Asus bios...Shame.
how about all core oc ?
why in every video soon as u put ur hand to a desk monitor shakes like crazy how would you even play games is that desk so weak you hitting desk on purpose or is every monitor stand in all the vides of bad quality what is happening there with every monitor shaking like ship on ocean, Id get annoyed if mine did that for sure
standing desk, raised up high to be in view of the camera :D
Am I missing something, I've got a 14900K and rtx3090. When I run the performance stats on black ops 6 (running at 4K on ultra settings) my CPU is running at about 20% to 30% and my GPU at 99% so how is this CPU going to make my machine faster if the CPU is not being pushed at all anyway?
It won't for that role m title, but perhaps for others 😉
Most of your cores won't be used on intel, you want per core ultilsation for those p cores
whats wrong ith your screen? wobbling, not stable stand?
Standing desk plus lots of moving around.
Do you think this cpu would bottle neck on the NZXT N7 B650? I’m not even sure if it’s worth getting on that that motherboard.
Let me know :)
Motherboards don't bottleneck CPUs really, for motherboards it is about what it can and cannot support.
@@daunted232 true its only about the socket type, and u pay extra only for other features like more ports and later gen ssd and pcie ports
Stop using the word bottleneck. Also lolwut? no. Why would a CPU "bottleneck" on a motherboard your question makes no sense refer to first sentence.
@ thank you
@@insertnamehere4419 bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck bottleneck
PC building this is my first and please let me know for any suggestion. It would be much helpful for 1440p gaming
Ryzen 7 9800X 3D Upto 5.2GHz- AMD Processor
MAG B650 Tomahawk WiFi or Asus Rog Strix B650E-E Gaming Wifi Am5 Atx- MSI motehrboard
Corsair iCUE H150i Elite LCD- Crosair CPU cooler
Trident Z5 NEO RGB (AMD Expo) 32GB (2 x 16GB) DDR5 6000 CL30-38-38-96 - GSKILL RAM
RTX 4070Ti SUPER Trinity Black Edition 16GB - ZOTAC GPU
Western Digital Black SN850X-1TB - SSD
RM850x (2023) 80+ Gold Modular - Corsair PSU
Hyte Y60 or HY70 case
MX-4 High Performance Thermal Paste (FOC)
If I could switch the 7800x3d for 9800x3d and pay 50$ is it worth the switch and paying those 50$ to get the 9800x3d
Has the 7800x3d come up short yet?
Do you need/want/must overclock beyond a some CO, slight and positive override on PBO?
If yes to one or both- probably worth it.
Otherwise youre set. 7800x3d is amazing. It wont overclock well. It will squeeze out on average 8-11% less fps across a sample of games.
If thats worth the trouble of finding a good 9800x3d and sell the 7800x3d (plus the hassle of removing and installing components) is really up to you.
I dont think so.
Oh! Also maybe youre doing more editing or such- then yea the 9800x3d makes sense. But then it might make most sense to wait for 9950x3d if you want more “production value” out of an x3d chip.
Yes get it if u can afford it
No the 7800x3d has been perfect and i do nothing but play FPS games nothing else. Is more of I want it. Cause I get for the way a previously stated who knows if later in I can get and upgrade for basically 50$
That depends on different factors.... Do you play at 1080p (hopefully not)? What GPU do you have? What type of games do you play? Is $50 a lot of money to you? Depending on those factors, it could be could either way.
$50 for that increase and longevity is def worth it.
its a complete waste of time lets be honest..
Can be fun to tinker and learn.
@@daunted232 Until you blow the CPU
@@daunted232 agreed, that’s it though, just turn on the auto OC’s and call it a day
@@TartanLad if you are following a guide from someone reputable, that is unlikely to happen :D
@@franda777 sure, do what ever one wants
AMD YES!!
I’m
Getting stutters on dayz and some other games when turning the camera in games
you will frame time pacing problems with games its all about dev unoptimization
Only online games multiplayer? What mobo ?
@@russc5269 ASUS x870e hero
Will do stutter on sharp turns on last of us and dragons dogma and some times gta5
I had an issue with the latest realtek eithernet drivers causing packet loss. Had to roll back drivers and now it's fine. .. Asus Rog strix e870 wifi
Hi
I was waiting for you to stop talking and take a breath 😲
breaths are for amateurs :P
can't get the cpu unless you pay $600++ on ebay. Not worth the money and bad time to build a new pc until AMD solve the suplly problem.
I purchased mine at my closest Micro Center. They said so much stock available. The chip could only be purchased in person.
There is no supply issue they are restocking frequently
Stock is delivered daily, it's just a really really popular CPU
There’s bundles where you pay only $400 . I didn’t buy day one and still was able to get one. There’s always being stocked sent in
Plenty of stock. Could have gotten multiple at this point. People just don't know how/when to look. Got mine right on release and it was in stock for 30-40 minutes before the demand overtook supply and it's constantly coming back in.
Does anybody know a affordable motherboard i can pair with the 9800 i am not spending 700$ on a motherboard....
MSI
B650M GAMING PLUS WIFI Motherboard, mATX - Supports AMD Ryzen 9000 / 8000 / 7000 Series Processors, AM5 - DDR5 Memory Boost 7800+ MHz/OC, PCIe 4.0 x16, M.2 Gen4, Wi-Fi 6E 140 gbp on amazon :)
@daunted232 God bless you sir....whoever you are I appreciate it😭😭👍
@@immortal_cactus4706you will need a bios update for the new chip tho unless you get an x870 board
I use it with the asus tuf 670e plus it runs just perfect
LMAO WHY OVERCLOCK THERE IS NO GAME THAT NEEDS THAT
If you can get more frames, why not?
@@daunted232no real point as nobody will ever notice that difference. Better to just undervolt and use less power.
@@BluD Sure, this video is educational, letting people know one of the options :P no harm done
You seriously don't need a 9800X3D if you are playing at 4k, it's just stupid idea on every front.
:]
Can i have a pc
no
@@florence-x1mIndian spotted
no
@@dr.derekrobinson1920wa
22
Lol and he shows 1080p numbers ...1 % will buy that chip for 1080p so the fps is irrelevant....stable is something this chip is struggles with it's has bad dips in 1% lows just like the 7800x3d
u have 2k grapic card 700 dollars cpu and u play at 1080p or 1440p ?? seriously ????????? ftw amd go and bench with 4k
Fool
You don't understand how benchmarking a CPU works do you? No, you do not.
@ yes I play combo with 3k and I play at 480x156 😂😂😂😂😂😂 20 hearts
@@mits00009 whatever that meant.
@@SwingArmCity bro you have one combo
4090 cards CPU $700 and why you need to play at so low resolution tell me ??????
Let me oil you up
INTEL IS STILL BETTER OVERALL
amd is just slightly better in gaming...
COPE COPE COOOOOOOPE
Facts or nobody will listen to you, my friend.
"Slightly better"💀
What Intel CPU do you recommend?
@@joniqst Depends, for gaming or productivity?
Always fun to see stuff like this. It's a copy paste of obsessive AMD fanboys during the FX days.