Couldn’t you just put a magnet on the other side and use the magnets to lift it? That way there’d be no hole at the bottom tipping people off to a false bottom.
I think he is talking about glueing a magnet on the false bottom and using the magnet to grab the bottom and you can lift it up. Strong magnets of course
@@dontworryaboutit8127 A thief is not going to experiment with magnets and metal parts.. he will grab whatever is in sight and book it.. if he doesn't notice something is off he will just open the drawer, see nothing of value and look elsewhere..
I agree, the hole was completely unnecessary and makes it cumbersome to open. He could have mounted smaller magnets in each corner (inside the risers or next to them) to keep it in place and then using just 1 strong magnet over the locking hinge to release the lock and lift up the bottom at the same time.
You could use a support piece in the center of the drawer to prevent sagging. Without it if you tap the bottom of the drawer you can easily detect a false bottom
Very clever use of the hinge and magnet. I wish I could do something like this but most of my woodworking projects end up looking like they were done by Homer Simpson.
This is actually genius in a way , but then again someone will expect something to be there since it a a bottom drawer and that’s where I would hide my goodies 🤔
2 words Death. Note. so, with that being said when do we get taught how to make a self destruct mechanism so it burns down your nightstand when done wrong
Tea Burn ya its referencing death note and in death note there is a self destruct mechanism if done wrong he is not making a functional suggesting just making a reference to death note
Nice design. Personally I would put the lock closer to the dowel hole. If anyone inspected the drawer and saw the hole, they could assume it's a false bottom. When trying to open it, with the lock in the center it's obvious that the bottom moves. Putting the lock as close to the dowel hole would make the bottom a lot more stable and the hole might be disregarded as a bad design as the floor might not move when trying to lift it. Just my 2 cents :)
DeeJay VEVO DeeJay VEVO DeeJay VEVO DeeJay VEVO that’s not true I know buddy’s when where in high school the both mom and dad and they had everything you dream about and still my buddy did heroine now he’s all cleaned up.
Impossible is a bit extreme; it's difficult and there are some challenges to overcome. I want them to face these challenges first so I know what to look out for when I try building one myself.
If there are Multiple Drawers and you want them to match, you could just remove the Original bottom, replace it with the new piece. So you would use the New piece as the actual bottom and use the Original bottom as the lid. Or you could just replace all the bottoms so they all match.
I'm thinking of the look on firefighters faces when seeing someone running out a burning building with a nightstand!! Oh yeah, They watched that video. 🤣🤣🤣
What happens when burglars break in, they generally don't open drawers nicely and take a peak. They rip them out and toss the contents on the floor, not sure your design would hold up to that.
You've watched too many movies. Most burglars take about twenty minutes per job, and most won't even take out everything that's in a drawer, just feel around for solid objects. This won't keep out someone who can take their time and knows all of these tricks (professional thief and police come to mind).
i was more thinking of junkies and those that didn't even make it to junior high. I think professional thieves will be looking for high value items, which most people keep in safes or the fridge/freezer, but your input is valued. take it easy.
I'd really like to see one of those builds completely un-cut (within reason ofc, skip glue setting, and paint drying, but other than that, tool gathering and such...) I dunno, I just find myself curious to see how exactly how long it takes to record something like this. Gives an appreciation to the amount of work that goes into your videos.
You should get metal sheets, melt them to a high viscosity, weld it, and cut it to make a sword. I think this will be a great idea. You could also carve "The King of Random" into the blade or handle.
I know that the smoke powder is a far off video in the past, but can you please add aluminum foil and make a tiny opening? it will make the smoke come out slower and you can make it more grenade shaped :D
I have made secret compartments in the premade void UNDER such drawers. With a board cut to size and secured in place, it is utterly imperceptible. Whereas a thief or curious family member searching for booty MIGHT compare the slightly shallower DEPTH of the INSIDE of the drawer (as compared to the outside maximum depth possible), people seem to dismiss such secret cavities as being an integral part of the origional construction. I can not take credit for this idea, as it is but one of the cleverly disguised compartments in antique desks...the craftsmanship of Victorian antiques (which are brutally HEAVY and not easy to remove from the home) is exquisite, and some contain many secret compartments. No criticism intended...I thoroughly enjoyed the ideas (and execution thereof) in this videos.
With a chainsaw of course! Or maybe something that would turn it into a victom-binding... one minute, let me remind myself of the vocab, it escapes me at the moment. Edit: Napalm! That's the word! (Also the fact it escaped me mildly points to my being a responsible person who would never...)
Personally, adding a support piece somewhere towards the middle may reduce possible sag that may be shown on the sheet wood when items are on top of it.
Now i can hide my death note
i was guna post that lol GG
I just typed that lol
Alexa S i did to
DON’T FORGET THE PEN
.....
Couldn’t you just put a magnet on the other side and use the magnets to lift it? That way there’d be no hole at the bottom tipping people off to a false bottom.
I think he is talking about glueing a magnet on the false bottom and using the magnet to grab the bottom and you can lift it up. Strong magnets of course
@@dontworryaboutit8127 A thief is not going to experiment with magnets and metal parts.. he will grab whatever is in sight and book it.. if he doesn't notice something is off he will just open the drawer, see nothing of value and look elsewhere..
I agree, the hole was completely unnecessary and makes it cumbersome to open. He could have mounted smaller magnets in each corner (inside the risers or next to them) to keep it in place and then using just 1 strong magnet over the locking hinge to release the lock and lift up the bottom at the same time.
Who in there right mind would look under a drawer
@@techgeek_mcg1217
Um idk Toxic people that doesnt understand privacy
*90% of these comments are death note related*
I’m so proud of this community
True
I want it to hide condoms 😂😂
Actually i bought one and wanna hide it from my mom
Same
Insert meme 'i love democracy'
rip 😕 this dude made my whole childhood way more fun
What happened to him?
@@zachsimmons9 the other guy the owner of the channel
You could use a support piece in the center of the drawer to prevent sagging. Without it if you tap the bottom of the drawer you can easily detect a false bottom
Great job! Years ago I had a bathroom vanity that I made a very nice false bottom for. I had (18) 100oz silver bars hidden.
Fake
Lies
kan petyim He said he HAD a false bottom YEARS ago. He had it in the past, as in he no longer has it. It does not need to be a secret.
Where is your house
probably shouldn't blurt that out, now it's not secret.
Do
It
Yourself
Now grab your TABLE SAW
More secret things👌... Like a secret frame!
I love these secret compartment videos!!
They're so cool!
Please do more!
Very clever use of the hinge and magnet. I wish I could do something like this but most of my woodworking projects end up looking like they were done by Homer Simpson.
Love both the animations, and the stealth idea!!!!
I really love your solar scorcher model. I would really love to see how fast a kernel would pop under it. Keep up the great work.
This is actually genius in a way , but then again someone will expect something to be there since it a a bottom drawer and that’s where I would hide my goodies 🤔
Yeah in not checking
Doubt it
It's like death note false bottom
what kind of goodies are you talking about?
You can hide a deathnote in there
I love that graphic that gives an overview of the project. Neat stuff.
2 words Death. Note. so, with that being said when do we get taught how to make a self destruct mechanism so it burns down your nightstand when done wrong
mwalsher dude it’s literally EXACTLY taken from death note, the one thing that wasn’t added is the self destruct mechanism for obvious reasons
and burn the entire house along with it after the fire spreads?
mwalsher bro perfect /r/iamverysmart post
Tea Burn ya its referencing death note and in death note there is a self destruct mechanism if done wrong he is not making a functional suggesting just making a reference to death note
mwalsher. Is it not sad that your limit to the comments you make is only one? and you clearly copy and pasted it :D
Only me that just watches these videos but never do them?
I do too
Yeah, I can't quite make a life-sized "carbonite" statue of myself either.
But when I do it will go great behind the trick mirror in the bathroom.
YahYeeet-that is what I do
soo me
Will you respond to this? A whole year later.
Nice design. Personally I would put the lock closer to the dowel hole. If anyone inspected the drawer and saw the hole, they could assume it's a false bottom. When trying to open it, with the lock in the center it's obvious that the bottom moves. Putting the lock as close to the dowel hole would make the bottom a lot more stable and the hole might be disregarded as a bad design as the floor might not move when trying to lift it. Just my 2 cents :)
99% of comments: death note
Me: *Attack on Titan Basement*
Nicely done
Hi there
Pop up in recommended rest in peace king 😥
Wait wut
Hey it’s non fan
Death note anyone?
Yhaaa
It's a reference or something?
Right? I thought of the same thing
Death note introduced me to this
Steve I was looking for this exact comment. :)
Fking burn the drawer down if you did not open it correctly!😂
Thx I can hide my heroin from my mum now
I don't feel like that is intended☹️
@@SecretStashBrosBuilds He can also hide it from his dad....
@@raminatox he knows all the spots though 😅
DeeJay VEVO DeeJay VEVO DeeJay VEVO DeeJay VEVO that’s not true I know buddy’s when where in high school the both mom and dad and they had everything you dream about and still my buddy did heroine now he’s all cleaned up.
You don't hide heroin, you inject it.
Bloody amateurs LOL!
Can you try building a railgun?
You mean a line gun? A rail gun is borderline impossible
Impossible is a bit extreme; it's difficult and there are some challenges to overcome. I want them to face these challenges first so I know what to look out for when I try building one myself.
Someones done it before
WarlandWriter only railgun which exists belong to the military
WarlandWriter The Hacksmith made a miniature one.
Brilliant idea guys . Thanks for sharing this .👍👍👍
*cough* DEATH NOTE *cough*
yep
MAN I LOVE THESE NEW ANIMATIONS. I HAVENT BEEN WATCHING FOR SO LONG.
If there are Multiple Drawers and you want them to match, you could just remove the Original bottom, replace it with the new piece. So you would use the New piece as the actual bottom and use the Original bottom as the lid. Or you could just replace all the bottoms so they all match.
Has Jerry Wess battled Fonz yet? If not, I’d love to see them go at it.
These videos are why I subscribed to King of Random! Finally something that isn't dry ice, vaccuum chamber, sun scorcher, or blast furnace.
What happens if u boil glow stick liquid?
Darren Radcliff you ruin a beautiful shirt
So clever that even Lupine couldn't find it. Big !!!
Death note?????
Liam Ngata yup thought so too
exactly what I thought
Same man
Ikr
mwalsher nah bro the reason y this is so funny is because besides the flamethrower this is exactly how he explained and made it on death note
Amazingly done. Thanks for sharing 👍 I appreciate it very much.
That intro and animations tho!
How to be Light Yagami
@@a.y.s8631
If he's the Shinigami you got.
you're rotten , MHMM , whats your name ?
I have no idea who tf that is
Psychic Sandshrew so mediocre ot makes me sick to my stomach
@@supercomputer0448 Its from an anime called DeathNote
This idea is used in the anime Death Note.
Yeah, they clearly ripped it off. He even said that it could be opened with a pen lol
Dev Den it was a meh anine
Um
Thief says...""Hey, I'm taking this nice looking night stand".
Love the cartoon descriptions. My little bro can easily follow.
The new animations are a great addition to each video. Really professionally done, too!
Make a fake bottom on a shoe
I'm digging the little animations
A spin-off from the Stealth shelf
a-lpha of Zeldaforme Gaming so true
Spin off, by the same person...?
Pure Slow Motion spin off can be by the same person
The other one was made by the assistant....
Recycling, my friend.
I love the new intro and animated explanation 💚
Happy Father's Day!
I'm thinking of the look on firefighters faces when seeing someone running out a burning building with a nightstand!! Oh yeah, They watched that video. 🤣🤣🤣
This is the tkor vids I like
Nice animation love the new Tkor
If I see a drawer with king of random shirts in it i'm checking for a secret drawer.
The perfect follow up to the Stealth Shelf! Please do more like this!
What happens when burglars break in, they generally don't open drawers nicely and take a peak. They rip them out and toss the contents on the floor, not sure your design would hold up to that.
You've watched too many movies. Most burglars take about twenty minutes per job, and most won't even take out everything that's in a drawer, just feel around for solid objects. This won't keep out someone who can take their time and knows all of these tricks (professional thief and police come to mind).
i was more thinking of junkies and those that didn't even make it to junior high. I think professional thieves will be looking for high value items, which most people keep in safes or the fridge/freezer, but your input is valued. take it easy.
thats when they set them self on fire
Their intros are just getting better and better
All comment “now I can hide my death note”
*_-Now I can hide my death note-_*
This is the kind of TKOR project I love!
I love this video and I love even more how many people think about Death Note when reading it XD
mwalsher why are you telling us "facts" it's obvious. They're saying Death not has the same idea as them
mwalsher Oh look, I found the odd comment out from the sea of copy+pasted ones of yours! Can I get a prize?
i just love the new animation type to explain what u r gonna do in brief!!!!
This is like in Death Note 😁
The animation takes these videos to another level
now to be light yagami you need to have a bag of gasoline in there with a igniter
And you must also take a potato chip and eat it!
Intro gets better every video!!
But does it glow?
Nice animation
We’ll miss you buddy ❤️
Very creative with the magnets and sponge!!
You should make it so that it has hinges on the far side so that the false bottom doesn’t come all the way out
Then the gap would have to be bigger and you'd be more likely to see it.
jjohnston94 true Ig
I really like the TKOR team animating the plan.
This WOOD be the best place to hide valuables :)
If you have a valuable that's fragile & flammable it could be, I guess
very nice
RockingStar1011 haha XD
Great animations!!!
You should freeze your homemade rocket fuel with liquid nitrogen and see if it still lights.
This intro is the coolest. Nice distortion guitar.
can try and make rubber ice molds thanks
Those intros just get better and better!
Could you mix mercury with the glow fluid you have or with super glue? Please like so he can see this!!
Soldier9478 1. those materials vould only float on mercury
2. they don't have mercury
Never hurts to ask
Nice video 👍 . The thief …🤣🤣🤣
Mom: what is this
Me: not a false bottom... DON'T LIFT IT!!!
Mom opens it
Mom: what is this notebook?
Me: not my death note at all
I'd really like to see one of those builds completely un-cut (within reason ofc, skip glue setting, and paint drying, but other than that, tool gathering and such...) I dunno, I just find myself curious to see how exactly how long it takes to record something like this. Gives an appreciation to the amount of work that goes into your videos.
I have a question what will happen if you put Coke in water purifier
I like you making these secret hiding places!
Make pykrete please!
You should get metal sheets, melt them to a high viscosity, weld it, and cut it to make a sword. I think this will be a great idea. You could also carve "The King of Random" into the blade or handle.
light yagami did it better
7.8/10 needs more fire
that song goes hard 🔥🔥
agreed.
FACTS
I find it intriguing, but highly disturbing that you, specifically, a daedric prince, answered with THAT.
I know that the smoke powder is a far off video in the past, but can you please add aluminum foil and make a tiny opening? it will make the smoke come out slower and you can make it more grenade shaped :D
With this, I could keep stuff away from my nosy siblings...who use my room as a playground...
We want more of these!!!❤
L wants to know your location
Near*
Gabe ?
I have made secret compartments in the premade void UNDER such drawers. With a board cut to size and secured in place, it is utterly imperceptible. Whereas a thief or curious family member searching for booty MIGHT compare the slightly shallower DEPTH of the INSIDE of the drawer (as compared to the outside maximum depth possible), people seem to dismiss such secret cavities as being an integral part of the origional construction.
I can not take credit for this idea, as it is but one of the cleverly disguised compartments in antique desks...the craftsmanship of Victorian antiques (which are brutally HEAVY and not easy to remove from the home) is exquisite, and some contain many secret compartments.
No criticism intended...I thoroughly enjoyed the ideas (and execution thereof) in this videos.
YOU FOOL!
you forgot to add some kind of historical clue which leads to a National Treasure!
I love the animation❤
Can you blend super glue ?
Rafiquzzaman with?
With a chainsaw of course!
Or maybe something that would turn it into a victom-binding... one minute, let me remind myself of the vocab, it escapes me at the moment.
Edit: Napalm! That's the word!
(Also the fact it escaped me mildly points to my being a responsible person who would never...)
This is stuff I like to see thanks
Those gloves for this project ... cmon now
Gloves when using a table saw is a bad idea. If the blade touches that glove, it can pull your hand into the blade.
Makes him feel professional... like calling a table saw fence a gate...
False bottomed drawers you make the rockin world go round
Light yagami did it beter
I love the new animation
This system has been shown in the anime "Death Note" 😂👌🏾
Minus the incendiary safeguard
Personally, adding a support piece somewhere towards the middle may reduce possible sag that may be shown on the sheet wood when items are on top of it.
Super glue in a non stick pan.....what would win?
Many stashes were made that day
Imagine TKOR has a death note with him
Nice way of explaning i love it ☺☺😊😊😊😊❤❤❤
So that’s how Light from Death Note made his secret desk drawer
Light Yagami would be proud.