You gotta love that crossplane engine sound! Went to watch a SBK race last September, the Ducati V4 sounds gorgeous, they do, but this Japanese piece of art on wheels it's the real thing.
Unless you’re racing competitively and chasing lap times or just want the clout of saying it’s a full system; honestly you cannot really tell the difference..
Love the R1Ms. I had a problem with the tune from BT Moto myself. Would stall when blipping the throttle @ idle. We tried everything shy of taking the bike into his shop. I ended up going with another tuner. Glad everything sounds good on your end!
Awesome stuff!! You need lacomoto mark2 carbon belly pan. I got mine last week and man not sure how we are riding this beast without one. The whole bike comes together once you install one. L
@@primitiveflier taking the MSF next week. Maybe I’ll get this bike in a few years down the road lol. That is if they don’t make all bikes electric just like those damn EVs!
@@jiajianhou426 recommend you sit on a few bikes. You can start on a liter but it’s not advisable. Very unforgiving power. I started on a 636 ninja and it was stupid fun ! I miss it ! Good luck and always ride safe man wear your gear always no matter the weather trust me.
This isn’t a show bike. It’s a bike that’s ridden every day. I’m not the rider who cleans his bike every day. I ride that shit till the wheels fall off. But thanks 😊
Correct; and yes it’s the perfect loud. Not obnoxious; it a deep rumble when you’re riding the bike and won’t blow out your eardrums when you’re getting on the throttle. You still definitely need earplugs for sure though.
The cops can’t see the plate when it’s bolted into the tail tidy; so you may run into some law harassing you about it. So I moved mine closer to the tire with some double sided gorilla tape so it’s “visible”
Hate to tell you bro I just got the 23 R1M and did some digging bro called Yamaha directly stayed on phone for 25 minutes for the rep to reach out to the tech department and she confirmed that the heat wrap and the muffler are the only titanium the headers are not they are stainless I’m being deadass bro I ain’t tryna catch no fame. Just passing the info.
Pretty certain headers are titanium , at least for mine. You can tell the difference if they’re not blue like mine then they’re stainless but most of the r1 are TI . They may have changed it to stainless to cut cost ..
Correct that’s why I moved it slightly closer to the tire so it’s easier to see. I got stopped but they let me off with a verbal warning. It’s really impossible to see the plate I’d it’s bolted on to the NRC tail tidy
@@primitiveflier in Sweden we have really big and ugly license plates i would like to Bolt mine like yours but further down the tyre. Unfortunately that comes with a fine.
@@primitiveflier its also illegal to modify your helmet by any means whatsoever, for example I'd like to wear one of these cool helmet covers that some riders do here on youtube. The DOT certified helmets are also illegal in my country
Let me make sure I’m understanding you correctly by taking your license plate and hiding it under the bike that’s supposed to keep police away. It’s tucked under.
Nobody is stealing 4 gallons of gas from a bike. The lock was put there as a gimmick. Just make sure when you install it, it doesn't leak when off throttle from a pull. Too many idiots forgot a gasket to prevent that!
Not worried about people stealing gas; worried about the haters putting random stuff in the tank that could mess up your engine bad… ie sand. Unfortunately there are some fkd up people out there.
You gotta love that crossplane engine sound! Went to watch a SBK race last September, the Ducati V4 sounds gorgeous, they do, but this Japanese piece of art on wheels it's the real thing.
Crossplane sounds siiick !
That thing is SWEET. R1’s have come a long way in 20 years. Enjoy every second!
I did. Unfortunately I wrecked the bike recently and it’s been totaled. Fml 🤦♂️
@@primitiveflier 😭😭
Beauty of this bike is so underrated. Great vid.
It definitely is! Thanks glad you enjoyed it!
Bro you got my heartbeat there. R1-R1M
Thing is the akro headers are lighter, larger in diameter, and have less bends. It does make a difference in comparison from oem headers
Unless you’re racing competitively and chasing lap times or just want the clout of saying it’s a full system; honestly you cannot really tell the difference..
Beautifully specced bike. This is my dream bike but I am not yet at the level to ride it (I ride R3). The R1's sound is my favourite.
Thanks for sharing, this is my dream bike 😎 drive save
beautiful bike, very tastefully modified.
great looking bike and good mods.
Thanks I appreciate that ! 🙏
Love the R1Ms. I had a problem with the tune from BT Moto myself. Would stall when blipping the throttle @ idle. We tried everything shy of taking the bike into his shop. I ended up going with another tuner. Glad everything sounds good on your end!
Who did you end up going with?
I had the same issue. Who did you go with in the end
If only we could get an answer......
Xplane r1 Custom Tuning. Bike is a new animal with his tune.
Wow, outstanding bike.
Amazing mate! Good Job!
tHANKS !!!
Awesome stuff!! You need lacomoto mark2 carbon belly pan. I got mine last week and man not sure how we are riding this beast without one. The whole bike comes together once you install one. L
That sounds tempting! We shall see; thanks ! ✌️😎
Man i wanted those tank grips but i went with the tech spec snakeskin since unfortunately Yamaha was out of stock for the grips, love the bike
ABSOLUTELY FIREEEEEE
Thanks my friend 🔥💯
dream bike. sounds and looks so good.
It’s amazing . A ton of Fun, and also the scariest liter bike you can own. Raw power. Definitely not a beginner bike.
@@primitiveflier taking the MSF next week. Maybe I’ll get this bike in a few years down the road lol. That is if they don’t make all bikes electric just like those damn EVs!
@@jiajianhou426 recommend you sit on a few bikes. You can start on a liter but it’s not advisable. Very unforgiving power. I started on a 636 ninja and it was stupid fun ! I miss it ! Good luck and always ride safe man wear your gear always no matter the weather trust me.
Dream bike 🙏
My dream bike
CROSSPLANE 🤤
Crossplane sex
very cool👍
Super osm my dream bike 😍
Perfect
Dammm,,,it so cool this is my favorite
So cool I like its
Fresh af
thank you !!
Would've been great to see those chain and sprockets clean.. Wheels too. Good choices on the accessories tho 🤙
This isn’t a show bike. It’s a bike that’s ridden every day. I’m not the rider who cleans his bike every day. I ride that shit till the wheels fall off. But thanks 😊
@@primitiveflier sure 🤭
I need one so bad man Omg
Yes you do. You’ll feel like Valentino
6:37
Thing went kaboom!!!
❤️🤜
so its the mid-pipe and the end can which is aftermarket ..? !... The sound is so good !!
Correct; and yes it’s the perfect loud. Not obnoxious; it a deep rumble when you’re riding the bike and won’t blow out your eardrums when you’re getting on the throttle. You still definitely need earplugs for sure though.
Bro how do you get such great cinematic shots?
Magic (Mr bean voice) hahaha 😂
😍😍
Sounds mint, that with baffle in?
There’s no baffle for this particular exhaust. I believe you have to purchase separate. At least I didn’t get one.
are those indicator lights on the back stock from the factory? They look very cool
No they’re NRC tail tidy. Purchased from motomillion!
The cops can’t see the plate when it’s bolted into the tail tidy; so you may run into some law harassing you about it. So I moved mine closer to the tire with some double sided gorilla tape so it’s “visible”
i also own one r1 2018.. ur bike is awesome sir. may i know how much this cost in ur area? mine about USD40grand for R1M brand new
$26K USD
@@primitiveflier hell much cheaper. Time to migrate 😂
wow.
There’s definitely only 4 power modes bro. - From a fellow R1M owner 😇
Any more Yamaha R1M content coming?
Not anytime soon bro I wiped out on the bike and gave up riding for now.
What license plate mod is that?
New Rage Cycle (NRC) tail tidy
dammm! that"s cute
Do a "how i clean my r1m" pls thx boss
Good idea I definitely will !
👌🏻👌🏻👌🏻👌🏻👌🏻❤️❤️❤️❤️
🙏🔥🔥
Got a link to this exhaust?
I got the exhaust from moto million. Check them out !
My dream bike🥺🫶🏼
You’ll get it brother just work hard and find what makes you happy. Everything will fall into place.
Piacevole da guardare grande moto una volta adesso vecchio e ammalato
Grazie amico mio; prego che tu ti senta meglio!
What make are your tank grips?
Looks to be a company called wodpice. Found them on Amazon
@@primitiveflier 🤣
@@primitiveflier how are they holding up? been thinking of the techspec ones
@@huetj39 no issues and it’s only like $30 give or take
Is it true that this bike does not have cruise control?
No cruise control on the R1/R1M
@@primitiveflier , Thank you!
Why just the right light works
Lowbeams
Цвет очень красивый!
After 2020, the r1 did not come with titanium headers.
Bismillah bisa beli kek gini
Crossplane sound like r15
I just want to come and live with u
Hate to tell you bro I just got the 23 R1M and did some digging bro called Yamaha directly stayed on phone for 25 minutes for the rep to reach out to the tech department and she confirmed that the heat wrap and the muffler are the only titanium the headers are not they are stainless I’m being deadass bro I ain’t tryna catch no fame. Just passing the info.
Pretty certain headers are titanium , at least for mine. You can tell the difference if they’re not blue like mine then they’re stainless but most of the r1 are TI . They may have changed it to stainless to cut cost ..
แต่งซะเยอะกระจกมองหลังนี่แหละทีไม่สวย
Can I have that bro 😀
Gotta work for it! You can do it.
@@primitiveflier thanks bro, it's an awesome bike 👍😍😀
@@manuelroman4758 you got it bro! Be good, be safe.
There's absolutely no way they see your license plate from behind.
Correct that’s why I moved it slightly closer to the tire so it’s easier to see. I got stopped but they let me off with a verbal warning. It’s really impossible to see the plate I’d it’s bolted on to the NRC tail tidy
@@primitiveflier in Sweden we have really big and ugly license plates i would like to Bolt mine like yours but further down the tyre. Unfortunately that comes with a fine.
@@primitiveflier its also illegal to modify your helmet by any means whatsoever, for example I'd like to wear one of these cool helmet covers that some riders do here on youtube. The DOT certified helmets are also illegal in my country
Would be cool if you had a list of all the mods with links to where to purchase. Next time!
that's my dream bike ❤️😛😸🙂😔🙆👽🦜
Let me make sure I’m understanding you correctly by taking your license plate and hiding it under the bike that’s supposed to keep police away. It’s tucked under.
It is foldable plate
Nobody is stealing 4 gallons of gas from a bike. The lock was put there as a gimmick. Just make sure when you install it, it doesn't leak when off throttle from a pull. Too many idiots forgot a gasket to prevent that!
Not worried about people stealing gas; worried about the haters putting random stuff in the tank that could mess up your engine bad… ie sand. Unfortunately there are some fkd up people out there.