Kayak Trolling Motor Mount - No Drilling - Portable
Вставка
- Опубліковано 2 жов 2024
- Looking for a light-weight and portable kayak trolling motor mount? Check out these options below. Also for very small boats, kayaks and canoes I recommend the WaterSnake trolling motor. The one in the video is only 5lbs!
Brooklyn Kayak Co, UH-TM315 Kayak Motor Mount (in video) - amzn.to/47Q0Lmr
RAILBLAZA Kayak Motor Mount - amzn.to/3PgM84b
Brocraft Fishing Kayak Trolling Motor Mount - amzn.to/3qKKJd1
Watersnake T24 ASP - 24 Pound Thrust 12v Electric Saltwater Trolling Motor - amzn.to/3syXTud
I may receive a small commission on sales from these links. I greatly appreciate your support!
Cool intro song. This set up is practical and on a budget. I like it. The way you have the motor mounted looks different than the pic on Amazon. Is there a reason? I left a like 👍🏽 you got a new sub
The water snake has two types of setups, one has a built-in type mount the other is a stand-alone trolling motor. That's the one I got and purchased a Brooklyn motor mount for it.
sweet set up. 1. this was posted 11 months ago, are you still using it? 2. what battery are you using ? 3. do you have to register in california? thx
Yes I still use it. I only take it when I am going longer distances. Otherwise I just peddle. I use a 28 or 50 ah battery depending on where I am going. That will get me around 1.5 hours or 3 hours of continuous use.
definitely like the low price and easy setup. Thanks for sharing
Thanks for watching!
Cool little setup on a budget!
What battery would you recomment to use with this? For reference, I fish a medium size lake and would only use the motor to cross the lake. My kayak has pedal propulsion and I would use that most of the time. Thank you!
Hi, I use an 18ah Lithium Ion battery. This will get you a little over an hour on high or 2.5 hrs on low. Sounds like that will work for what you want to do. 🙂
Does you kayak track straight? I am using a 4 stroke petrol motor and am tracking to the right. And is there any long term effects from thec flexing?
Nope runs pretty straight.
Glad I watched this before buying a Watersnake. That is a noisy motor!
I think that is mostly due to my setup. I am not able to get the motor as far down into the water as you might otherwise, so it makes a sloshing sound as it pulls in a little air. I think it would be much quieter if it was on a kayak with a little less free board.
Looks great
Where can i buy trolling mount ? Thanks
amzn.to/47Q0Lmr
Does it create more noise mounting it this way?
'more' noise is kind of vague :) More than what? If you mean being close beside me instead of up front or back on the stern, I would say yes. Its a bit noisie being right next to me especially as the shaft is not super long and does not allow the drive prop to be deep in the water. So you get a fair bit of prop noise. I just sing a little louder!
just wondering what would i do if the holes arent perfect for the bracket
the mount is flexible when you loosen the screws so as long as the holes are standard size and they are within the maximum distance you should be good.
@@thekayaklaunch cheers barra
How much amp hour does the trolling motor use?
7 or 9 ah depending on your speed per the documentation
@@thekayaklaunch nice! Can't wait to get one too