How to Replace a Car Battery
Вставка
- Опубліковано 10 січ 2018
- How to change, replace or install car battery on a Subaru Forester or principles for changing a battery on any car, Toyota and others
I show you how I do this job start to finish but like all mechanical work this may not be something you can safely do and this video is not a replacement for your owner's manual. Contact your dealer for an exact replacement battery.
This job will take an average of 15 minutes ad is something you need to decide if you are capable of doing.
I hope this video is helpful. I would appreciate the thumbs up if you like it and Subscribe for more videos.
Disclaimer:
Due to factors beyond the control of Silver Cymbal, I cannot guarantee against improper use or unauthorized modifications of this information. Silver Cymbal assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Silver Cymbal recommends safe practices when working on machines and or with tools seen or implied in this video. Due to factors beyond the control of Silver Cymbal, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Silver Cymbal. - Авто та транспорт
😀 If you enjoyed this video please SUBSCRIBE and LIKE . It really helps keep my channel going and bringing you great videos like these 😀
Straight to the point and clear instructions. 👍🏻
thanks mate, success from Australia
Thank you. The bracket is where I had trouble. I had to replace the battery at night and for the life of me couldn't find the bracket holes.
Thank you so much for this video. Just did this for the first time and everything is good. Appreciate you
Thank you!!! I just changed my first car battery and this helped so much
Thank you for letting me know, so glad it helped and saved you some money.
me too ! full agreement
He should have used a battery memory saver? That's as simple as 2 alligator clips a couple pieces of wire and a small 9 Volt battery; so it can hold a trickle charge on some of the electronics!
Michael DelRossi keep a memory
Big Help thanks
Thanks... your vid helped tons. You should note in the comments to use an extended 10mm driver... the drivers that came with the ratchet set is too short to reach the nut on top of the battery bracket
Thanks for the vid, but I thought that when you disconnect the battery the alarma goes off and all electrics can be messed up....?
I just changed mine on my 08 Impreza WRX. I was worried if I needed to keep a small amount of power for the ecu, like some newer cars where they recommend you connect an small power source to keep your ecu or other electronic parts that need constant power from either reseting or shutting off completely.
You don't need the supplemental power, at least you won't have any problems without it. In my experience the ECU, etc won't be affected. Most often the clock and radio stations may be lost but it's usually fairly minimal. Thank you for watching and please subscribe. Best wishes.
What if the original 550 cc battery is replaced by another 650 cc battery in the Subaru Impreza or Ascent from 2019 to 2021 ? thank you
Thank you so much for the tips on the window. It took a few tries but my 2017 Forester windows are back in sync.
My pleasure glad it helped. Please share with anyone else that can benefit from my video. Thank you kindly for the comment and for watching. Best wishes to you.
@kaisenji... For your 2017 Forester.. what else resetted besides the window and radio preset stations? I have to change the battery which is no problem but have no idea what else would reset... Did you have a battery management system? Where you had to program the battery settings into the car computer?
May I ask please what can I use if the clamp holding the battery in place is rusted? I am trying to help my mother with her car battery and the clamp and bolt is rusted and difficult to turn.
Thanks bro, i have a Forester XT 15 and my hazard light are clicking i think it should be a low battery problem...
Glad it was helpful. Thank for you for watching my videos.
Wait. I have a 2013 brz and my battery didn’t come with a sleeve like this one did ? Can I purchase a sleeve for it?
Not sure about that, you probab;ly can but it may not need it. Might depend on the battery.
mine is also 14, I'm curious, do you change it due to time interval or the battery needed to be replaced?
Mine actually died, gave me a couple of warnings first where it was suddenly hard to start but sadly it just failed. Should have lasted longer in my opinion but at least a factory battery was only $125 which is pretty low compared to other brands I have owned. Thank you for watching.
thank you.
Just changed my MY14 Forester battery, and now the automatic window doesnt work, can only imagine what other problems a simple thing can cause?
If it still goes up and down but its the auto fucntion that doesn't work. Put the window all the way up and hold the window UP button for 5 seconds. Then try the window again.
More details here for you: Initialization of power window
If the vehicle’s battery is disconnected due
to situations such as battery or fuse
replacement, the following functions are
deactivated.
. One-touch auto up/down function
. Anti-entrapment function
Initialize the power window in the following
procedure to reactivate such functions.
1. Close the driver’s door.
2. Turn the ignition switch to the “ON”
position.
3. Open the driver’s side window halfway
by pushing down the power window
switch.
4. Pull up the power window switch and
close the window completely. Continue
pulling up the switch for approximately 1
second after the window is closed completely.
Nunber Ampere?
What tools did you used to remove nuts and size?
Sorry I don't rememeber it was probably 10mm or 12mm deep socket
How much is a car battery for subarus?
Check it out at a dealer, I only paid $120. A non-subaru battery was quote at $160. Cheaper at the dealer this time.
Changed the battery on my sons 2012 Impeza. After installing new battery, several warning lights appeared including the check engine light. The car started but is undrivable due some kind of transmission sensor? Any suggestions?
I would try disconnecting the battery, wait 15 minutes and reconnect it. It may help reset it. Let me know how it goes.
Change plugs wires and ignition/ coil packs
My 2013 Forester did not start on the first try. It spun the motor but no spark.
Cranked it a second time after about five seconds, fired up after a longer crank.
Third time it starts normal.
I was told the electronic's need to re remind themselves that it is an engine! 😂
Let the car idle, vile you change the battery.