Bmw 116i F20 N13 - How to fix the distinctive engine noise on cold start
Вставка
- Опубліковано 11 гру 2024
- Usually, during a cold start there is a distinctive noise at the engine bay of BMW 116i. This noise is normally produced by the vibration of a joint at the wastegate. In this video I am presenting a method to reduce that noise.
I am not responsible for any kind of modification that you may perform on your car watching this video.
Please like and subscribe to my channel and press the bell icon to get new video updates!! Thank you for watching!!
The music in my video was downloaded from UA-cam music gallery.
rack: E.P.O - Assasin
Music Provided By: Magic Records
Listen To The Original: • E.P.O - Assasin (Magic...
Fanlink: fanlink.to/bvxV
Infrared (Letter Box)
Mob Battle (Silent Partner)
Up Above (Letter Box)
I used the same part for my BMW 114i and it worked perfect. I also replaced my intercooler for the VALEO 818263, also a nice replacement part.
Have you used the 06J145220A oder which "same" part ? Thanks in advance :)
@@Sanreath The same VAG part.
@@Outpost1977 Thank you, in the Video it was mentioned that the VAG Clip it to big to fit underneath the turbo heat shield, is it actually not the case?
@@Sanreath No really not. My garage did the installation. It's a great fix. No noise anymore. Also the intercooler works fine. No need for the more expensive Wagner.
I would really appreciate some commentary rather than loud music during an educational video like this...
Can never understand why people need music which is distracting and annoying when trying to watch educational type videos.
What the name of the part that you disassemble at 2:52 please ?
Fixing clamp (part number 11787584380)
Wire clamp (part number 11657631112)
For the lambda probe...
Does it work with B38 (118i) f20?
how can it be wastegate when mine has no turbo
What is the oil consumption of your bmw?
I top mine up every 2 weeks or so
Not sure if this is normal or not, what about you?
@@joshjustin4145 i was about to buy the same BMW but i changed my mind. On the website I’ve read they “drink” a lot of so one time per 2 weeks I think it’s good result
@@oskaroskar9589 this is my first car so I'm blessed to have it despite it's unique characteristics
Do you mind sharing what engine oil you're using for N13B16a? Thank you
TWIN POWER TURBO SAE 5W-30 BMW Longlife-04
RAVENOL VST Motoröl
5W-40
is the best oil for the n13 engine
@@NIK7A only idemitsu zepro racing 5w40
Is it necessary to shorten the round side of the clip to prevent it from getting in touch with the heat shield?
Yes, you need to shorten the round side for the clip code 06J145220A
@@NIK7A where can I get this clip from please?
@@anthonycampbell9807 Check with code 06J145220A on aliexpress, ebay etc
Do you need to unscruw the bolt before you can set the clip ?
You don't need to unscrew something from the wastegate. Only the screws from the cover in order to gain access.
Excellent! Any suggestion to fix the Shield vibration sound? My shield vibrates at low RPM and the bolts are not loose.
Here is a solution
f20.1addicts.com/forums/showthread.php?t=1657132&fbclid=IwAR3vtHRJ0X6KghwHAEFO_6jnN2yrCue2SEejbL46Z_zJaOFg0ovKMkM5RFo
Did you resolve it I have same issue it makes an annoying noise I can see it vibrate
@@anthonycampbell9807 The shield vibration is largely due to engine vibration. My engine mount condition still reasonably good so I didn't change that. Instead, I started using Liquimoly ceretec additive and fuel injection cleaner. The engine became smoother and quieter and operated with less vibration .. so that kind of help. Hope it helps.
hello, can i have the dimensions and the drilling diameter of part, please
Hi! Sorry for the delay
Dimensions for the clip with code 06J145220A
The bigger side 42mm x 24mm
The smaller side 37mm x 24mm->12mm
Ηole 13 mm diameter
Thickness 17mm and the smaller 11 mm
Thank you very much
Did this and actually yeah, the vw turbo clip is too big and trying to fit it I lost it in the engine. Now the rattle continues and know there's a clip somewhere inside the engine bay haha
Same… This happened to me because I didn’t removed the heath shield. I have bought a 22mm socket to remove the lambda sensor and I will have a second round next week 😂
I found it very hard to get the clip on tbh
Nice job!
which intake have you installed
Pls send link ;)
Injen!
ua-cam.com/video/XYgRzXV3D8I/v-deo.html&ab_channel=eNTertainment
Как вы боритесь с расходом масла ?
Com o oleo 5w40
the noise is practically the same so in this case, the problem is another
The engine is bmw or psa...
No, the engine used in the BMW F20 N13 model is not made by the PSA Group. The N13 engine is a BMW-designed and manufactured engine.
@@NIK7A are you shure... it not a base psa -bmw rework by bmw....
...
greek patenta