Це відео не доступне.
Перепрошуємо.
How to Replace/Install PCV valve on BMW 1 Series 116i,118i,120i,114i F20F21 N13 losing oil fix
Вставка
- Опубліковано 14 сер 2024
- LOSING OIL FIX! Step by step how to install new PCV valve on BMW 1 Series 116i,118i,120i,114i F20/F21 (engine N13) + POV drive + install / 1.6Turbo 4 cylinder | 4K 60FPS |
#car
#carmodification
#mechanics
#cartuning
00:00 Intro
00:07 Install PCV Valve
03:08 POV Drive
04:35 PCV
05:16 Outro
That solved my problem in brazil today, thanks for the video.
Cheers pal,
Thank you sooo much this video saved me lots and lots of money ❤️👊🏽
I have a 116i 136ps F20 and the problem is when the motor is warm, and i let him in idle 3-5 min then i press the acceleration it’s coming out white smoke (not too much) do you think is coming from this valve ? Recently i changed it the oil with Motul, maybe he dont like it ?
Mine wasn't smoking, some people do have smoke from the pcv failing. But usually the smoke is blue. And happens when decelerating.
You will be losing oil if its pcv, but white could be headgasket if its got water coming out the exhaust even after its warmed up. Hopefully it's not that.
Also if it was water/white smoke from headgasket you would lose coolant.
Also white smoke could be the turbo, is it high mileage?
@@lewisljr110.000km, actually im losing oil but not too too much, i seen on gauge
A little too late for mine. Started getting an oil weep on top of piston in cylinder 4 and now piston is dropping. Looks like a rebuild in the future now unfortunately 😕
What it sometimes runs on three cylinders? You tried changing the coil on the bad cylinder? And spark plugs?
Also wouldn't buy cheap chinese coils or spark plugs. Saw something where people selling fake ngk sparkplugs ebay/amazon. And the chinese coils fail quick.
It's dropping cylinder 4 intermittently now because of where the pcv lives directly over that cylinder and piston. The cross hatchings on that cylinder have worn off and an oil leak is occurring on top of number 4 piston. The only fix for that is a rebuild my friend.
I had a camera put down into each of my cylinders in order to diagnose this problem.