Painting my Garage Floor with 1 Part Epoxy
Вставка
- Опубліковано 9 жов 2023
- Today I'm showing you How to apply 1 Part Epoxy on my Garage floor.
Hi, I'm Matt along with my wife, Sara and our 4 kids we are fulfilling our dreams of becoming more self-reliant. We support our dream by working from home running our laser engraving business.
Join our Private Group for
1 On 1 Phone calls with Matt & a Monthly Group Chat:
/ laserengravingwithmatt
Etsy shop with SVG & PDF files for sale, EngravingwithMatt: www.etsy.com/shop/Engravingwi...
Join us Fridays for new videos!🌻
Check out our vlog channel, @Matt & Sara (New videos weekly): / @mattsara2802
Don't forget to LIKE, COMMENT & SUBSCRIBE!
Click that 🔔 to be notified when our next video comes out!
Matt & Sara
Shop our favorites:
Laser Dark: www.laserdark.com/order
Transfer Tape: amzn.to/3TjUHKo
Brilliance Spray: amzn.to/3LVTp84
Ruler: amzn.to/443IkIN
Caliper: amzn.to/436a3ap
Business Cards: amzn.to/3pgtuzr
JDS Patches: shop.jdsindustries.com
Item #PTHSET3A
Awesome Hats: amzn.to/3qLluGX
Cermark Black Spray: amzn.to/3qqndkM
Blue Tape: amzn.to/3qASP7z
Mactron Laser: mactron.aliexpress.us/store/g...
Desk: Use my code【YTB15】for an extra 15% OFF over $500!
For CAN buyers, use my code to get $50 OFF over $500!
US site: bit.ly/3LhfYUC
CAN site: bit.ly/3JA6BOQ
Keyboard: amzn.to/3FB1MCm
Etsy Search Engine tool: salesamurai.io/.
Use Coupon Code: MATT20 for 20% off
Sanding Disks for glass: amzn.to/2JCm9W4
Laser Clamp Pins: www.etsy.com/listing/13720156...
New Laser: www.thunderlaserusa.com/machines
xTool (Diode Starter Laser): www.xtool.com/?ref=w86Oew0Jk4...
Best book for beginning your business (Hard copy or audio): amzn.to/3ehpGZ1
3D Printer: s.zbanx.com/r/bjgWdKwKDDxY
ref=w86Oew0Jk4nD&
Powder Paint: amzn.to/3Nhq5qS
Gasket Making Material: amzn.to/3ls4C2h
Blue Tape: amzn.to/3FNzS3a
My favorite LA's Totally Awesome Degreaser: amzn.to/3tGhmaT
Super Clean Degreaser: amzn.to/3oIvBt5
M8 Fan: amzn.to/2Z08qQr
External Hard Drive: amzn.to/32OVoqy
Cermark: amzn.to/3EKxbAj
Bottle Openers: amzn.to/3i1xsoS
Dusting Spray: amzn.to/3znltIM
Rubbing Alcohol: amzn.to/3Bv3OQb
Q-tips: amzn.to/3BihFZK
💡 Lightbox : amzn.to/31h1GLC
Corel Draw Software: amzn.to/3pG3wzW
Sandpaper Blocks: amzn.to/3pVQVrV
Clear Coat: amzn.to/2LOM3qr
🖨️ Our favorite label printer the Rollo: amzn.to/2IVCVyV
🏷️ Flat 4x6 labels compatible with the Rollo printer: amzn.to/3pMawvO
📸 Camera: amzn.to/3iuYsLE
🔺 Tripod: amzn.to/2QgipJM
Scale: amzn.to/37IE2L7
Drop us a line ...
Matt & Sara
PO Box 9
Carver, MN 55315
Send Business Inquiries to: homesteadingyt@gmail.com
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that we provide we may receive a small commission. There is no additional charge to you! Thank you for supporting us so we can continue to provide you with free content each week!
Music: Courtesy of Epidemic Sound
#laserengravingbusiness #laserengraving #laserengravingforbeginners - Навчання та стиль
I'm a contractor that's going to do a basement floor today I'm very impressed with the way you were in prepping the floor for paint 🎨 made a huge difference on the quality of your job you took the time to do an awesome job .. and you're right the end result looks amazing.. 🤩 he felt like a rockstar at the end of that job😂😊
Well done. We did this for my Dad for Father's Day years ago. He loved it.
Thanks. That’s awesome
Perfect 👍! Thank you Matt .
You made it look easy. I may have to do this at some point with my garage
Would love to see a 6month, 1 year update on this. My biggest deterrent for doing it myself is all the flack that pros give on how weak the DIY system is.
I will so far it has been great.
Looks good thanks for sharing it with us
You should be proud of that outcome! Looks amazing.
Is definitely am 😃 thanks.
A man and his garage, love it!
Absolutely awesome. NOW, I have a mission. Great job brother Thanks for sharing...
👍😃
Looks great! And you are correct, the prep is the key. When I did mine I did not intend on putting the cars back in so I went with a rubber floor. Keeps the cold of the concrete out. You may want to make sure your garage doors are insulated.
Thanks 😃. Yup did that 13 years ago. All good
Matt you ROCK!!! Your garage looks awesome. I plan to do my basement/walkout and this video was very helpful!!
Thanks 😊
Dude. Thank you so much. I'm building an elevated home and will have about 1500 sqft of area in the garage. I was looking at some professiobal options and they were between $7 and $9 per sqft. I just didn't want to spend 15K on the floor. This seems to be a great option and I thank you for your step by step tutorial. Your finished product looks great!
Thanks. It still looks good as of today.
Flakes are good for hiding that shiny star washer that drops under the car from the bolt you can barely reach.
That looks so great!!
Thanks 😊
I used this coating twice, my biggest complaint is over time (3-6 months) the epoxy breaks down from warm tires and that section peels up. My next plan is industrial epoxy 2 part system this summer. I am glad this one benefited you 👍
Looks pretty good🙏
It looks hella good brother
Great Job. Tons of bad reviews out there about this and similar one part epoxy paints. The products work but most of the failures are die to bad prep. Any stains need a degreaser product and solid cleaning. Then when dry a good etching. Then make sure it is very dry before bonding coat and then make sure that’s dry. Most people skip, cheat or are impatient causing the failures.
AMEN BROTHER
That look's really nice Good Job love the grey and white
Thanks 😃
Turned out really nice
Thanks 😃
Looks real nice Matt !! congrats
Thanks
Have an “Open Garage” party to celebrate. Gifts ok.
Phew!!! You wore me out watching this! I was able to polish off a cold one while I watched though, so all is not lost!😂
😂
Damn, that looks great - well done!
Thanks
LOOKS GREAT I need to redo my floors in my garage, weather has finally cooled down in Cypress, Tx
Yeah it is worth it
Beautiful job Matt, you’re rockin. Can’t wait to see how it progresses. I’m stuck in a zoning and building dept loop for my shop build and looking like it’s not be done and up before snow comes 🤦♂️
Thanks. That stinks
Yeah that Home Depot guy USED to do this for a living. I’d say there’s a reason he works at Home Depot now 😂
Good job!
Thanks
A Wednesday bonus! Cool. It is looking sooo good. My muscles hurt for you 🤪
Thanks 😄
Nice job👍
Thanks
Sorry but i find most of the home depot guys are clueless
HD training: don’t learn anything, don’t bring any knowledge or experience. If a customer asks a question, just open the same app they have and read to them.
Nice job
😃 thanks
🔥🔥🔥
Would you recommend using flakes or not?????
You should have rented a floor buffing machine with red or brown Scotch Brite pads to scuff the floor. That's what I did in my basement in 1996 and the paint is still on the floor to this day.
Wow that’s awesome. So far it’s been great 👍
Would love to know how it’s holding up today Matt. I just put it on my shop floor. I have my doubts but I still used it.
Still looks great
Great video. Enjoyed it.
How has this been holing up to car tire wear? I have a 32x40 that I use as my wood shop but also park cars in there, thinking about doing this in my space.
It’s been holding up great. But I don’t park cars in it. It’s only used for my business so lots of foot traffic.
Great job, Matt. I've just put down plyboard sheets with 5mm penny style rubber matting my space is much smaller than yours. I've just seen you have uploaded a video on ventilation. This is my next project for the Thunder. The outlet of the machine is 6" & the inlet on my purification cabinet is 4" the outlet from the purification cabinet is also 4" to then run outside. I'm not sure if 6" dropping to 4" would choke the system any advice would be greatly appreciated.
Going from 6 to 4 I would think you won’t have enough pull
@laserengravingwithmatt7833 That's what I thought. Back to the drawing board, at least I got an external air compressor sorted it showed up today. There's just not enough hours in a day. Thanks for the reply it's much appreciated. I know you guys have a bit on your plate it'll all be worth it in the end. Sending positive vibes from over the pond 🇬🇧
Great video!! Did you think about not using glitter? I'm trying to decide glitter or not. I like just the clean look - don't get me wrong it still looks awesome! Thanks for the video!
I did but I am so glade I did.
Looks really good 👍🏼 did you put a clear top coat?
Thanks. No I didn’t
How is it holding up after 8 months????
Great vid. I’m thinking about doing my basement workshop. Can I use paint in an are with little ventilation?
That all depends on you
Looks great. Did the epoxy have strong fumes?
Thanks. No they didn’t but I had lots of fans going also
Amazing job! Questions: Do you have to apply the epoxy paint within a certain time period? Can you put the lid back on the can and use the paint later or is it once it's open you must apply all of it?
Good question. I don’t know. I would think you can use it again.
Wondering just throwing the flakes on top, I’ve seen videos where they scrape off the loose flakes after and put clear coat over it. Are your flakes coming off when sweeping? Is the floor smooth or rough with flakes? Thanks this looks easier for sure!
The first time you sweep, there is loose flakes, but only a little bit and I feel like the flakes give it a grip. I never did a clearcoat after I was done because I don’t want it slippery.
I really want to see what this area looks like after you have updated it
I plan on doing a one year
I just had two coats of one part epoxy applied to my garage floor after the typical prepping, etc. it came out great but it is cold by me, and I’d like to add one or two more coats so I can add the flakes (that wasn’t done the first time). In a few months, can I simply go right over the epoxy we just applied? Second- did you apply the primer to the concrete walls or just the paint? Thanks and great video!
You need to read the back of the can I don’t think you can wait that long and yes I primed the side walls
@@laserengravingwithmatt Thanks brother!!!
Hey Matt! Getting ready to do this in my garage. Hows it holding up?
It’s been great so far. I love it. Make sure to clean the floor really good.
Hey! How is it holding up? Any peeling or damage after a couple of months? Thanks !
It’s been great! No peeling and or damage. 😃
Hey, Matt
What do you think about using this in a basement with a concrete floor. I'm a first time homeowner. Thanks!
It would be great. It’s still doing great in my shop.
can you do update 4 mon later? I did mine with behr and few weeks later looked like shit. soon I start parking cars (after week of waiting ) - all paint underneath the tires was gone. Its good for basement maybe...
I will do a one year. So far nothing is wrong with it. It has been great
I need to do this to. Thanks. How's it holding up
It’s doing great
what is the ideal mix for acid to water? Also should I bite the bullet and get a rental grinder or will the acid do the trick?
That’s what the directions say
i saw another 1 part guy said that that the tires will destroy the 1 part paint
Thanks for posting my man. Quick question: Could I put down some clear coat for more of a shine?
I don’t know 🤷♂️
You can add a clear coat and also I would add slip resistant additive so I won’t be too slick and slippery.
Thanks
Updates? Diamond blades or acid edger?
Still looks great and acid edger
Did you use the one that comes with the kit?@@laserengravingwithmatt
How’s it holding up 2 months later? Any damage from cars being parked on it?
It’s doing great. I don’t park in it because I run my business out of it.
Great job!! You have a list of materials?
I thought I put it all in the description
@@laserengravingwithmatt sorry, oversight, was at work and was not paying attention!! Thanks
Do the flakes add friction? Looking to do this at my dog training facility if there's enough traction
Yes not a ton but more than a painted floor
Can you list the Materials I need ( cleaning supplies and paint Epoxy etc. ) please.
It should all be in the description
Could you share the products you used.
Everything was in the video and in the description 😃
That looks great Matt. . So now when I have a project similar, you can just come to Ohio? LOL
Thanks. 😆 that would be fun
Any peeling now thats its been a few months? There are some bad reviews on Home Depots site. Maybe the bad reviews are from people that cut corners. Thanks
It’s is awesome so far. I will do a one year review this summer. I think you are absolutely right. I don’t think they did it right. I have lots of heavy stuff moving around in here and it still looks amazing
What primer did you use?
BEHR PREMIUM® CONCRETE & MASONRY BONDING PRIMER
Can you clear coat the floor? I see people doing that after the chips. Looks great though
I am sure you can. I just don’t want it slippery.
You can also add the non slip additive, there is a cheaper 50$ buck clear gallon one or the 160$ clear coat one … I’ve read better reviews on the more expensive one but I don’t think you can mix the single epoxy paint with then the 2 part epoxy clear coat
what are the name of the items you used in this video. Sites i can get them
They are in the description
Don’t see materials (primer, type of epoxy, etch, etc. in the description
What was total cost I apologize if I missed it.
I am sorry if memory serves me right it was a little over 300
The “cracks” in the floor are there for a reason. Probably should have never filled them in. Other than that it looks pretty good.
I know they are relief cracks is just fine to fill in with cock. You do not want to fill in with anything hard.
What is the square footage of your floor?
27’x27’
I didn't even mix it with water for my floors
How about a four month review? Does it still look good?
I plan on doing a one year review. But so far nothing wrong yet 😃
Thanks I put recoat on today epoxyshield tomorrow then rock solid clearcoat
Nice 😃
Nice job. So how much money would you say you spent to get it done?
It was 275
You we’re smart not to do the side walls with epoxy you need every drop you have for the floor in most cases, you can always do the side walls with a color matched porcelain and deck paint cause nobody’s gonna walk or drive on your walls (Pro tip)
😃
No gloss?
Nope
You seem like a guy I could drink a beer with lol
😃
Great Job Man 👋👋💪👍 . Now you hot yourself a Man Cave. 75in Tv Fridge and Some 🍺🍺🍺 😆 but You Deserve it .
😃
Look good, congrats.. but you need to use GOOD mask , because those chemical isn't good buddy .! 🤔🤪😵😎👏
You have to grind that nasty concrete for good results otherwise it’s just a gamble
It worked good on my end
You Canadian?
Nope Minnesota 😃
You should have ground the surface slightly with a floor sander with a80 grit sanding pad 🤣
No need because I used an acid.
Should I put the c*** in filled the cracks before you paint?But it still looks good
I didn’t because I think the paint will peel
Sweeet!
My brother is a professional water proofer the stuff from Homedepot will not last. There’s better.
Well it’s on there now no time to take it off. You should’ve said something sooner.
lol
Pointless comment. What's better?
I have a business doing polyurea/polyaspartic one day floors in Indiana. From our experience acid just does not do enough of a prep to maintain a good bond. We grind, and use complete flake system and it will last 10-20 years with no issues. Proper prep is key and using good materials. Yes it costs more money to do it right, I think we all understand that.
Also, we would use about 130 pounds of flake on that size floor for comparison. There really is no way to do it cheap and make it last. As soon as you park a car in there that epoxy will pop off. I know you said you are not parking cars in so maybe it will last a bit. Good luck and thanks for the video.
The accent is hell
🤣🤙😂
If I was you I would find a good cardiologist because you sound always out of breath.
I was sick as heck doing this