High Bypass Turbofan Engine Assembly - Educational Model
Вставка
- Опубліковано 6 вер 2024
- Awesome stationary Turbofan engine found in A320neo, B737max, C918 @stirlingkit
For educational purposes.
Check it here:
►DM119 Turbofan Engine Kits : bit.ly/3TJxRy6
►Stirlingkit Must-have Jet Engine: bit.ly/3vJkFkK
---------------------------------------------------------------------------------------
►Subscribe! bit.ly/2m1d1y7
►Instagram: johnnyq_90
►Support my videos!: / johnnyq90
Sounded like a bag of bolts being shook.
Jet engines usually do at low speed.
That are the blades of the compressor. There are several reasons for that:
1. Easy Installation and removal
2. As the engine spins faster the centrifugal forces will push them outwards with hundreds of G's, reducing the vibrations
3. It leaves space for thermal expansion
For the model you dont need any of that obviously, but in a commercial airliner thats another story
Ha. Bag of bolts would be more useful ,to me. Good but of fun tho'😅
Boeing built it.
@@RyshusMojo1 or that, true
Man that thing was not machined well. Main shaft not in balance fins moving and scrapping housing. Johnny needs to make a high quality one
There is a guy on YT that made a running one. And tbh it’s much better than what this guy would end up with. No glazing here.
@@superskullmaster name of channel?
@@Sasquatchadventures1 AgentJayZ :p
@@Sasquatchadventures1 ua-cam.com/video/1g_HzBGhqIE/v-deo.htmlsi=JI4KElE3TxvVTRlK
@@Sasquatchadventures1 channel is called “DST - Engines”
I could see Johnny machine one that actually works. 😂😂😂
With the right metals and a lubrication system, it would probably run.
@@Petriefied0246 nah, high-bypass doesnt scale well unfortunately...fluid-dynamics and all that.. but single-stage low-bypass is very doable, I built one as a teen 20+ years ago.
@@njones420 DST-Engine yt channel is worth a look, High Bypass RC sized.
The sectional pieces and parts gave it away🙄🙄🙄🙄. I like JohnyQ's Functional classes better
@@PiDsPagePrototypes oooh, I stand corrected...I'll check that out!
Cool, that's exactly how the engines of a Ryanair jet sound like. What an astonishing level of detail!
Are you grmen
Glad you didn't have to lock wire all the nuts and bolts.
This won't be ETOPS tho😂
sad the tolerances are so bad could have been a really nice model rotating silently
you should hear what it sounds like when an actual jet is windmilling on the ramp
@Noman1000 i know they make some noise but it's not necessary with a model or they could have tightened the tolerance and had an explanation on a plaque with the rest of the information
@@Billskins4dayz The noise is the individual blades moving when it's not spinning fast...the real ones do the exact same thing.
@njones420 I know this but it ruined a nice model on this I'd choose functionality over accuracy when it's never actually going to see heat to shrink tolerance
Hands down awful .I'm actually disappointed
Come on Johnny!!! It only takes a sparkplug and some nitro hahahaha. Nice build!
alright, now recreate the video of the guy dropping a screw down it
Awesome!
I'm a former Turbofan Test Engineer for Lockheed and Rolls-Royce at Stennis Space Center, from 2007-2012, testing the Trent 900, 1000, and XWB engines for the Airbus A380, Boeing 787, and Airbus A350.
I've got to get me one of these!
God the Trent XWB is beautiful.
Btw, can I ask you one thing I couldn't find the answer online?
I've seen the inside surface of the air intake/nose cowl to be perforated with small holes.
Is it actually blown to remove the boundary layer? Or is it just a texture to reduce the viscous friction?
@@salmiakki5638why can’t it be both? 🧠
@@superskullmaster but maybe it be neither, those were just my hypothesis, and I couldn't find mention of these holes online or even technical documentation I used to have access to
Would you settle for such poor quality and inaccurate design ? I'm an aero engineer and never get this cheap as Chinese junk
@@simplefact4u, I just want something similar. This one does sound like shit. I definitely didn't mean "I want to get that exact one!"
For $999 it should be way better quality. That's insane
6:48 I can't stop laughing. Marble machine.
For the cost i would expect that to be machined better. Cool table piece though.
Says the clown that has zero machining and engineering knowledge or experience.
For that cost id expect it to be fully functional
You should shim up the blades with paper so it doesn't sound like someone threw a bag of pennies inside that thing. :))
Why? Real turbofan engines sound like that when they rotate slowly. The fan blades are loose on purpose.
models are cool and all but u know what could be even cooler one of these that actually operates like a real one
3:00 if you wonder what these tubes are for: This is called Low Pressure Turbine Active/Passive Clearance Control (LPTACC/LPTPCC). All these tubes have small holes on the inside and they blow cool air at the LPT Case. This is done to ensure a small tip clearance between the turbine blades and the case to achieve a higher efficiency. The difference between active and passive is the presence of a dedicated valve (active: there is a LPTACC Valve - passive: no valve).
This is a nice model for educational purpose however I'd prefer a two shaft model (obviously more complex but also more accurate).
Thank you for sharing!
I'm watching the assembly of this turbofan engine and having one continuous thought while seeing all of these parts coming together......." I am never boarding a commercial airliner again!"
I was looking at it thinking the tolerances were lousy and wondering if it would be rectified on tightening all the fixings, now I know why it’s not a working model..
My dreams are shattered! lol 😅
Sounds like a Boeing lol
There are actual jet engine models like this that actually work, but they are very expensive to buy and maintain.
Beautiful piece of engineering. Be great to see one that actually runs with fuel.
This toy sounds like a 1982 Ford Escort with carburetor trouble. 😂
Thanks for sharing. I'll make sure not to buy one.
After seeing all the trouble and design that went into this gorgeous thing I sure didn't expect it to sound like that!!
😍приветствуем любителей реактивной тяги
It should be real model and functional with fuel.
Hi. With your knowledge and skill it would be no problem to fire this engine up !😊
Now fit a 12S brushless system on there and lets see some thrust😂
From what I’m reading in the comments it’s sounds like it would explode 😂
@@daylightdies7194 exactly. That would be spectacular😁
I think were all thinking the same thing. If Johnny just machined a few parts for this.. Itd probably work 👀
I've had quieter shopping carts at the dollar store😊
Run some fog through that thing. That would look pretty cool 👍
Wahoo, a New upload with JohnnyQ90 !!
It's my favorite channel, with the mad Engineer, Machinist. 👍🏻😎👍🏻
Thank you JohnnyQ90. 🙂
I already see your vision for this one...
Do it,it will be perfect!!!
Johnny! We need you to build one!
Next step, fuel and igniters. 😊
love these engine builds....
Make it functional
I have been thinking of making one and this came up. Makes me want to print one today.
Sounds like a genuine China Airlines domestic jet.
True when you fly in Boeing planes, which is about 41% in China.
With the runout of the turbine visible when looking in from the rear of the turbine , if you spun that up it would scatter extremely destructively. Something doesn't seem right because it sounds like a washing machine filled with bolts and nuts
It’s an educational model, it is not intended to achieve the strength, tolerances and frictionless operation of a real jet engine! If it did it would be much more expensive!
@@crashwelder5337, at low rpm, the front stages of the engine have their blades pinned and are able to move 5 to 10 degrees about the pin, the noise is something else at 20 to 80 RPM. It does sound exactly as you describe.
That’s sooooo freakin awesome
Omg those tolerances lol Cool build.
Top sound of working 😂😂😂
It is a very good teaching aid but it would self-detonate at those tolerances in heartbeat. Very cool.
IT'S WORKING!!! IT'S WORKING!!!
아무리 바빠도 일단 영상 시작 누르면 멈출 수가 없네요..
" I Like how small and complex it is, It is a work of Art."👍
This looks good! I dont know any of this but my dad who was a jet engineer knows.
Oh wow. All of that just to see that small ass motor powering everything. I honestly that flames from hell would be coming out of that thing when completely assembled.
Holy Crap!! That is the same jet engine off my last flight!
What really grinds my gears....... But awesome piece to have on a desk :)
wow your channel is so different sir
I'd love to see you machine your own working model of a jet engine!
This'll go perfect on my podracer!
Friggin Sweet dude!
1000 USD and not even double shaft. Johnny can make it better
It does look cool and educational. It most certainly does not sound like it.
I was waiting for metal fatigue to set in and jam everything, but it does show a lot for educational purposes. Nice build!
Sounds good
Tolerances look ok
Right
Let’s get some fuel in there and get it screaming 😂❤
As a gas turbine engineer I feel like a failure for not having one of these on my desk 😂. May just have to get one…and know what it feels like to be on the other side of assembly instructions 😅
Johnny build a real one.
Man Add A Little Oil In Places!!!
Totally Assembled Dry!!!
Can you convert it to a working jet engine? That would a fun project.
I bet you could get that rotating assembly to run quieter, would require loosening off all the housing bolts and shimming the fan to centralise it then tightening up again.
That sounds sound like an old Traktor is running in idle 😂
Где-то в Ростове покрылся мурашками один Игорь Негода 😁
All I have to say is that I am teasing and amazing!
Must be from a Russian plane.
I dare you to use something like this as a turbocharger for one of your RC cars. 😂
Can't wait to see you turn it into a desk fan =)
You can read the user manual very quickly and backwards, that's what talent looks like 😂👍
I love it😂. But part of me wants to see that spin faster and faster till failure 🤔
They should integrate some jet sounds into that speed controller. Maybe a fine kerosine mist too.
That sound 😂 looks cool anyways 👍
That’s a cool kit
Johnny I'm gonna need an age restriction on this video, I work with gas turbines and this is NSFW. Great stuff!
i was waiting for Johnny to put in the kerosine until I realized its not a real turbofan model
Very cool model!
Nice model.
always a pleasure and a surprise to watch you put things together
Must be Christmas everyday but that sounded like you got clothes
Pretty cool, and then you powered it up.
You could build it from Lego blocks and be 100 times smoother than that.
It would be fun to vacuform clear covers for some of the sections.
Now give it to Kevin Talbot to try to destroy 😂
Add a higher rpm motor in it
it's barely holding on at the RPM it's going at.... i can't imagine it running any faster and not just exploding.
If you properly lubricate it and give it an overpowered motor it'd make a really cool desk fan
Hi there 🎉 I have the same box ordered. I want to start in some weeks to start the build!
For the cancelling: what do i need to build model WITHOUT NOISES ? an NEWTONMETER TOOL ? or a ALIGNMENT TOOL for the fan blades ? THANK YOU !!!❤
I thought it was a real miniature one. Oh well. Time to make one I think, Johnny Q90!
Well, now you just have to build the rest of the Batmobile.
The problem with this models is that they usually cost arround the same as a real RC type jet engine. And the RC type one can be expose, can be dissasembled and reassembled, and can be turned on and used on a RC aircraft.
More turbo fan videos please!
If a country can, and have a market large enough to produce this kind of toy, and inspire its children to have interest in aerospace propulsion technology, that country is probably not too far from the real thing...
I wonder how long we have to wait until this one get's rebuilt to be a fully functional tubrofan.
You have a very good life. Thank you for sharing. Watching you put together all the coolest toys is great. Thanks again.. ive watched every video of yours.. love every single one of them.. 🙂
Jesus christ! A 1,000 ball bearings in a tumble dryer wouldn't sound as bad as that thing!!
Nice video, thank you :)
I'm glad the Chinese are still living up to their standards.
Love your videos man!
Now, put 8 carbs, add 4 fuel pumps, re-machine the main shaft and supercharge it!
Oh boy...is johnny gonna make an airplane after finishing the v8 rc?
As a retired aircraft tech, I approve.
Приветствую всех любителей турбореактивной тяги!
Поддать бы жидкого в нём!
Looking forward to the videos where you improve this to actually look and sound good, and maybe even run. 3D printed inconel is an option for the hot parts...
Why was the main shaft bent? Was it like that out of the box?!?
Replace the highpressure side with a hobby grade 50kg jet engine and see how much thrust that front fan assembly can make 👀
might need to balance and find a way to feed it oil it a bit first tho