Removing Door Trim and Adding LED Reverse Lights
Вставка
- Опубліковано 26 сер 2024
- Removing Door Trim and Adding LED Reverse Lights
Parts Used
Reverse Lights amzn.to/2S6E08l
Tools Used
Rolling Chair amzn.to/2Zx8bt4
Impact and Drill amzn.to/32ro3zw
3M Eraser Wheel amzn.to/3gKGmnJ
Fishing Line amzn.to/30FMBUk
3M Adhesive Remover amzn.to/3a8BF4T
Griots Polisher amzn.to/31FvwJo
M105 Compound amzn.to/33M34bw
Nitrile Gloves amzn.to/3jUVUXe
After looking at the trim on the side of this thing peeling and discolored, I decided to remove it. I know when I removed the emblems I said I was going to keep it to cut down on door dings but its not worth repainting. In this video I show you how to remove the belt trim or door moldings and clean up the paint after. I also show you how to remove the bows in the roof rack. This process of removing the roof rack bows should be the same for yukon, tahoe, suburban, escalade, yukon xl and denali. Last be not least when I did all the lighting upgrades I didn't have bulbs to change the suburban reverse lights to led. We fix that today and I show you how to replace your suburban, yukon, tahoe and denali reverse lights with led bulbs.
Hit the comments and let me know what you think.....
Thanks For Watching!!!!
Other Parts Used on this Chevy Suburban
DROP PARTS
Spindles Used amzn.to/3hrDqw2
Spindles for 2" Drop amzn.to/3hnxGDh
Shocks(Front and Rear) amzn.to/33iPISk
Rear Springs amzn.to/3hkFV36
Rear Air Bags amzn.to/3bSHHaq
DJM Kit djmsuspension....
Bump Stops amzn.to/32qKdBC
LIGHTS
High Beams amzn.to/3gNHuak
Low Beams amzn.to/30GXKUO
Fog Lights amzn.to/3gJN2mg
Daytime Running Lights amzn.to/30HRM6g
LED Turn Signal Bulbs amzn.to/2PFt28s
Vinyl for Bowties amzn.to/3gNGpzi
Interior Light Kit amzn.to/3kPy8xh
Subscribe and Follow TWA Motorsports
UA-cam: / twamotorsports
Instagram: / twamotorsports
Email: twamotorsports@hotmail.com
Video Equipment used to make this video(Need to update)
Gopro Hero 6 Black amzn.to/2NGLPxT
Gopro Session amzn.to/2IZprAp
Video editing amzn.to/2NawHtz
Photo editing amzn.to/2NawHtz
As Always Thanks For Watching!!!!!!
Do this at your own risk. For entertainment purposes only
SUBSCRIBE FOR MORE VIDEOS!!!!
Disclaimer:This video and description contains affiliate links, which means if you click on a product link, I'll receive a small commission. - Авто та транспорт
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
This channel deserves more subscribers
Thank you
Without the molding it looks even longer 👍🏾👍🏾👍🏾👍🏾
I agree. It does look a little longer
@TWA Motorsports Here I was thinking I'd have to get the entire door repainted (all FOUR of them), but then I come across this vid & with one simple attachment, I'll be able to pull out the dremel & have the doors lookin like the trim was never there. THANK YOU, bro
Glad I could help
My 2 cents is that it looks awesome the height that it is currently at. The debadging looks great too. I have the rear LED'S on my 09 Silverado and you could actually drive backwards and use them as headlights they are so bright.
Thank you. Your right they could be used as headlights lol
Looks so much better and cleaner, makes washing the vehicle easier as well.
Thank you. It is less to dry around
I like it dude. That’s a clean simple SUV
Thank you
It looks way better I did the same to my Trailblazer and I took the racks out
I agree. I like both ways though
Looks great without the trim 👍
Looks clean with out the moldings but they do sure help a lot when you park in a crowded place
Every thought about replacing the taillight fixtures with the new Cadillac tall taillight. I really like mine. I used the smoked lens on my black Suburban. Turned out nice. Lots of compliments. I enjoy your channel, thanks for all the info. !
Thank you. I'm just not a huge fan of them.
Very nice! This was one of the first mods I did to my 2013 Sierra. Definitely cleans up the look of the truck. Makes it a whole lot easier to wax.
Thank you. It is easier to clean this way
I'd probably stay at that height and fix the rear end issue you mentioned. Without the trim, the wheel size is even more of a visually uneven proportion and in my opinion lowering more would further accentuate that. Either way, I appreciate that you make every attempt to keep your fleet maintained
Thank you. It isn't going to get dropped much more.
You have made me love lowered vehicles.
Lol. The dark side!!!
All ur vehicles look good after u finish I like the Texas edition wheels
Thank you
Hey man just got an 2010 and wanted to clean it up and make it my own. Started with the door trim and wanted to do it right and came across this video. Thanks, was very helpful! If you have any other ideas or tips to make it a touch more bad ass I'd appreciate hearing about it. Thanks .
Did several things to it
Maybe you should make the black parts of mirrors color-matched because it will make the Suburban look better
It is textured and imho I don't love that look
Suburban looks awesome!
Thank you Jeff
Looks awesome! I literally took my molding off my suburban today as well. Definitely gives it a cleaner look. With my truck being black is seemed to be a lot messier than your white one.
Thank you. Yeah black sucks to keep straight
@@TWAMotorsports it was all glass yesterday. Now today the outline haze is all visible again. I guess I need another clean, and buff. LOL.
Yeah sometimes it takes a few passes
Yes do the video on the dod deactivation! I’m moments away from camming my Sierra to eliminate that stupid dod afm crap. Thinking of getting the baby cam from summit. Lowest lift duration to keep mpg. 205/217 .500 lift
Will do
Keep trying to talk my wife into lowering our 08 Tahoe 🙄
Just do it while she is at work lol
Beautiful
Thank you
I need to remove my racks too. Like the look!!!
Thank you. I like those bows gone
I love the transformation..
Thank you
Plain old Gas works great removing glue....I've done it for years...
Yes but this does work better
Nice job
Thank you
The tires in the back look a bit weird u mentioned that already but looks real good
Man looks nice. I still haven't bought that buffer, my truck is super straight no dings nothing but needs a buff has some minor tree or bush scratches from previous owner. Gotta work on my front bumper gap. Sides are perfect but center in touching the grill cant figure out why
Thank you. Yeah the buffer is great for that stuff
I've had bad luck with white and removing emblem and trim. It's always yellow under neeth.
Paint correction is needed after
another good video! Ditch the dewalt stuff and go milwaukee though..lol Loving the 'burban.
Thank you. I need a Milwaukee impact for sure.
Anyone have any great recommendations on after market head lights, I’m wanting them to be brighter and to have a more 5000k look to them like the newer model Chevys. currently driving a 2013 Tahoe. Not sure if I need to look into replacing the entire housing assembly to achieve what I’m looking for? Also for the tail lights/ reverse lights just any plug and play LED Bulbs will
Work with the swap? Also what has anyone installed a back up camera on their Tahoe/suburban yet? I have one but have gotten mixed reviews on where to land it. Thank you for this video I am going to attempt the same project on removing the trim. Looks great!
I did a video on this with headlights
LOOKING GOOD BRO!
Thank you
Hi Travis I am writing to let you know that I am new to your channel. I admire the way you explain things. You do a very good job. I have changed out all of my interior lights and a few exterior ones. I have a 2005 Yukon Denali. I was wondering if you recommend these back up lights for it as well. In addition will you or have you done a video on replacing the bulbs in the steering wheel. I am sure this is a common problem when the vehicle begins to age.
Again thanks for the great job and keep them coming.
TW
Savannah, GA
Don't have a video of the steering wheel. Back up lights definitely make a difference.
Looks great without the door trim. Now I've got to put LED's on mine.
Lol. You do
Looks really good bro
Thank you
Hey do you think you're going to do a video of how to deactivate the AFM system? I for one would be extremely interested in seeing how you do it as I have the same motor in my truck.
I will but just going to disable in the computer
What can i use to get the rust from under carriage.
Por15
Easy way to check reverse lights if you're by yourself is to turn the key to the ACC position, apply your e brake and put in reverse.
Your right. Didn't think of that
What headlights are those? Oem with LEDs? Not projectors?
Yes oem replacements
Would have loved to see how much light the reverse lights actually throw behind the car and not just how bright they are looking at them. I've been trying to find good LED reverse bulbs for a few days now too and I can't decide which to get.
kemicala JDM ASTAR Extremely Bright... www.amazon.com/dp/B01GGK6QDW?ref=ppx_pop_mob_ap_share
These are great. My suburban is so dark tinted that the camera wouldn't pick up that view. Its worth the $20 for the ones I linked below.
Where u get the lights. I got a 2010 Tahoe Lt
Link to lights in video description
What are the number of the LED reverse bulbs?
Listed in video description
Would you ever put some bigger and newer Denali or LTZ wheels?
I might at some point
Looks good........been wanting to remove side trim from my 06 tundra xsp for quite awhile now......has been park inside all its life, has only 57,000 miles on it......how bad you think the paint will, if any, be darker under trim????? It's silver.....thx
It shouldn't be too bad. With being inside I doubt you will have much fading
@@TWAMotorsports👍 thx
You're welcome
PLEASE PLEASE PLEASE do a DOD AFM de activation video i dont have money for the delete but i am also worried about the system failing
Will do
Like
Thank you
For the license plate bulbs just get some LED ones from AutoZone better brand and you don’t have to wait to get shipped.
I have some Phillip's I'm putting in
What test weight is the fishing line?
Thinker the better. I listed the brand in description
Had to sub 👍👍
Thank you
You sounded like a kid when he gets a new toy and by that I mean that laugh after you see the reverse lights
Lol. It was so bright I was excited
@@TWAMotorsports yeah I got some on my Tahoe I just got to get the inside ones
@@andyacosta1985 inside is definitely worth it
👍
Thank you
Great tutorial my friend. Getting off the beaten path... I ordered Umi upper a arm brackets for my project 94 Pontiac Trans am. My stock upper a arm brackets are junk.. I looked up BMR but they don't make them..so I went Umi. And they are black. That's the only color they come in.... Are you going to be using your stock a arm brackets in your ws6??
No I have lca relocation Brackets
@@TWAMotorsports ica?? Never heard of them?? Your using relocation brackets on upper front?
@@TWAMotorsports send me link to ica. I want to check them out. Thanks
I meant in the back
@@TWAMotorsports yes my back one are BMR relocation brackets. But I was referring to the upper front a arm brackets. You should look into yours.. mine were shot...b
You should remove the running board too
I don't like that look
Plz do a video of how to disable the 5.3 v4 mode
I will do that.
TWA Motorsports thank you because it’s annoying when your driving
@@marceloesquivel5665 it requires hp tuners
How’s the ride with it lowered?
Rides great actually
Handles well? Thinking of trying to duplicate a PPV Tahoe, but with a Suburban. Thanks for the reply btw.
It probably handles better but I don't drive it hard in the corners.
thats why i'm glad my 5.3 is pre cylinder deactivation.
Yeah they are better
tim on the side are 125 each send them to me
Already trashed it
Look better but did you know that you need to do is turn the key to the on portion don't turn the motor on
You're right I could have done that
Just Rhino line it
Probably should have
Yea buddy
👍
TWA Motorsports i been saying that trim needed to come off haha and about the m105, i was using that forever until they guy at my paint shop told me to try this new compound, i kid you not 100 times better I’ll get you the name of it and you try it if you want, truck looks great
Yes let me know. Does it make less dust?
@@TWAMotorsports it cuts and smooths our paint effortlessly compared to the mother’s products
@@TWAMotorsports tommorow I’ll make sure to grab the name for you
You should put escalade taillights on your suburban would look 👌
I just don't love the looks
Perhaps he means the 07-14 Escalade O.E. led taillights assembly?
@@joeethereal2968 they are not bad
just pull them off
Suburbans are the best.
They are nice for the room
@@TWAMotorsports I love my 03. You've seen it. Lowered burbans are even better.
@@thatgreenrcsb truth
First
What up
If you remove those side moldings then you have no way of protecting your car from door dings
That's exactly what I said in the video
Yea you do, be careful where you park it lol
@@americanman911 exactly