Audi Q5 Front Brake Rotor And Brake Pad Replacement DIY (Audi MLB Q5/SQ5 2013-2017)
Вставка
- Опубліковано 10 лип 2024
- ►Audi Q5 front brake replacement is one of those jobs that you will just have to do at some point during your ownership. The Audi Q5 on the MLB platform between 2013 and 2017 has a multitude of brake options depending on trim package and engine choice, but no matter the exact options, the process is nearly the same.
When shopping for new brakes for your Audi Q5, be sure to go to fcpeuro.com and enter your vehicle in the "My Garage" vehicle selection tool on the upper lefthand side of the screen. There, you can add your particular model to ensure that you get the front brake pads and rotors you need specifically for your Q5.
In this DIY, Aaron Davis, FCP Euro's Audi Catalog Manager, walks us through the step-by-step DIY on how to replace the front brakes on your Audi Q5 at home in your garage or even in your driveway.
Buy this Brake Kit Here: www.fcpeuro.com/products/audi...
To learn more about the Audi Q5, visit info.fcpeuro.com/audi-q5
#audiq5 #audi #fcpeuro
00:00 - Intro
01:19 - Tools Needed
01:46 - Job Start/Wheel Removal
02:03 - Pad Retaining Pins Removal
03:26 - Caliper Removal
03:58 - Rotor Removal & Install
05:48 - Caliper Install
06:10 - Pad & Retaining Pins Install
08:41 - Pad Wear Sensor Install
09:05 - Wheel Install
09:27 - Wrap-Up
SUBSCRIBE: ua-cam.com/users/fcpeuro?sub_c...
Get free parts from FCP Euro:
www.fcpeuro.com/page/lifetime...
Follow FCP Euro on:
/ fcpeuro
/ fcpeuro
/ fcpeuro
www.fcpeuro.com/ - Авто та транспорт
Great details and professional. No hacked steps. Really appreciate knowing the steps BEFORE doing the job. Thanks!
BEST detail video EVER! From every angle, well explained... thank you so much... More please😂
Extremely thorough video! I changed my own brake pads and rotors by myself. Helpful video
How can you not trust a guy with an Audi/VW tattoo? This gentleman is the real deal. Excellent video! Thank you.
Pretty awesome. Seems simple enough, "IF" steps are followed as shown. Thank You FCP Euro. In the future I'll look into upgrading my Front Brakes to this Brembo set.
Perhaps when I add a little more power to my B8.5 allroad.
I'm about to replace all for my 2015 Q5 discs and set of pads this weekend. This tutorial came out at just the right time. Very clear and excellent video, great job.
Hopefully it helps you while you're wrenching at home playid69!
@@fcpeuroI need a Information, if you can Help I apreciate much!!!
Was it the same process for the rear rotors and brakes?
@@erica3361well?
Thanks for the tutorial! I noticed my anti rattle clips were originally installed the other way round. I'm glad I caught this thanks!
Awesome - thank you guys for this! Dealership wanted way too much for new brakes and rotors all the way around. I bought the kit from you guys!
We love saving people money David, glad to hear it!
Great video, the trick to push the pads back. Spot on. Easy Peasey!
Explained quite well compared to other videos I've seen
Glad to hear it pstecle!
Fantastic tutorial!! Was super straightforward, except the Pins!!! All 4 were super seized.
Awesome tutorial guys! Love the DIY content!
Glad you enjoyed it Mario!
Great video. I really like how often you "Go ahead"
Glad you liked it!
Great video, very professional.
Appreciate the time and great video, thanks.
Quality demonstration. Thank you.
Glad you enjoyed it!
Good job thanks from France , best vidéo for change brakes
Glad you liked it!
Excellent videos
excellent video
Thank you ❤️
More videos on Q5s would be great.
Lots more coming out Chris!
@@fcpeuro for an sq5 2014 what disc I need
Thanks for this video! Does the wear sensor need to be changed even though the light indicator didn’t come on in the car?
Excellent. We'll done. I was wondering how to get those pins out!
Does this kit comes with zinc coating on rotors ? I cannot tell in the fc website description. How reliable and differences vs the oem original audi rotors and pads ?
nice work!
Thank you! Cheers!
Nice, now let's get a video on the rear with the electronic parking brake shenanigans. :)
just unplug the electric brake motor. Run leads from a 12v battery to the motor piston. This will bypass all the computer requirements. Reverse polarity to drive the piston open or closed.
Hi can you post how to change 2014 Audi Q5 oil pan thank you !
Can I reuse the brake hardware pins for the anti rattling? Because my new brakes only come with the big middle metal piece not the two long pins. So can I reuse them or order new ones?
Don’t you have to rewind the pistons back into the caliper or is doing it the way you have sufficient
Do you not need to disengage the electronic parking system before removing the pads? Ty
Thinking of doing this job on a 2018, any major differences to note?
Thanks for the demonstration. Super useful! The tool list at the beginning was useful too. Just curious, is replacing the rotors with the pads a "must do" or a nice to do. My rotors looks pretty smooth and hardly worn.
It is good practice but not required. The "must do" is replace all 4 of whatever you are replacing not sure 1 or 2 sides.
Anything about brake pistons or are those easily backed into caliper?
Sure NOW you post a step by step video. I did this last Summer on my Audi 3.2L Q5 with parts from FCP Euro. It all went together well but this project was the thing that got me to pull the trigger on a Milwaukee 3/8 Impact M18. Dealer wanted $900 for the same service. Uuummm nope.
We love our Milwaukee rigs, they make every project better :-) Glad you saved a bunch of money DIY'ing it Bill!
@@fcpeuro scored some points with the wife and my eight year old son didn’t learn any new swear words - double bonus.
I have a q5 hybrid, is the process the same.
It’s it the exact same for the sq5 2016 or is it slightly different
Also, no lube on the clip or guide pins?
A little antiseize on the hub before putting the rotor on doesn't hurt. Especially since you sanded the corrosion away.
Looks nothing like my 2015 SQ5 front rotors. I have the 380mm discs.
Is this the same process for Q5 2020? Front
What size pick do you need?
Is it possible for you to make 2015 Q5 rear brake pad replacement, thanks
We can certainly add it to our queue!
how about the 2019?
hopefully there is a similar video on how to do the rear rotor and pads with the electronic brake (release issue?) - ??? Audi Q5 TDI. 9:37 did the rear using 12 volt alarm battery with small alligator clips, and bingo, bango DONE!
So, this can be used the same way for a 2018 2.0 Q5?
Ever figure this out? Getting ready to do my 2018 2.0 soon
Any tips on removing those pins if they're stuck? Mine are seized, hit it with penetrating fluid but no luck.
A lot, and we mean a lot, of penetrating fluid, a small punch, and a hammer.
@@fcpeuro Thanks!
Any different steps for the rear brakes?
no
Is this the same process for a 2020 Q5 or are the front brakes different?
Hi Matt, the idea will remain similar, with hardware and parts varying in size.
Is this the same for 2018 (second gen) SQ5?
Removing the pins is the same, but need to remove the caliper off, which has 2x size 21mm bolts and then a clip holding brake hose/pipe to be able to get caliper off to install new brake pads.
I wonder why you have not used ceramic pads?
Do you have any tutorials for replacing the rear discs and pads on 2015 Q5? Thanks
Just done mine. It was fun as the piston is used for the handbrake. There’s a UA-cam video of a guy using a battery to move the piston back, watch it and follow it unless you have the device to plug in for retarding the piston
@@paulbeaumont7485 Why does the handbrake need to be on for the removal?
@@wbdharris He's talking about rear breaks (where you need to move the motor of the hand break back - better done through VCDS or obdeleven)
electronic break. little motor near caliper, can be moved back in with 12 volt battery with small alligator clips. video exists.
My man got the Audi tattoo on his left wrist!! He gotta know his shit!!!
Can you do SQ5 brake pads and rotors please?
Yeah this looks completely different from my 2016 SQ5 callipers
Should show it being done in the rears with EPB😌
What is EPB?
@@wbdharris electronic parking brake
Those pins are the hardest part
Great instructional video, only problem i'm having is when I went to change my brake pads on my 2018 Q5 the Brembo calipers looked different. These calipers prevent me from simply sliding out the pads from the backside of the caliper. The calipers I have are Brembo but are designed with a closed back preventing the pads from being removed through the rear of the caliper. Also the clips are a bit different. Ive searched several YT vids for a tutorial with no success. Does this particular caliper need to be removed completely? Are you planning on doing a tutorial on this style calipers? Thank you in advance.
Hi Raider, The 18' model will have a slightly different setup as you saw! Not all Brembo units allow you to service the pads with the calipers still in place, you will have to remove the two bolts that hold them to the knuckle and service them that way. As soon as we get to that model, we will be sure to do a DIY on it!
My Sensor Just Popped Up Today About My Brake Pads.. Change Them All Correct? & If So, Could I Just Order Them From Your Store? All Fairly New To Me To Be 100% Honest
Hi Pedro, the light can come on and be for either the front or the rear pads. You can do a visual inspection to see if you need to do the front or rears, or scan the car to see the code. From there we recommend you replace both the pads and discs on the worn-down end.
This info was not correct when I changed the brakes on my 2016 AUDI SQ5. The tools needed were completely different sizes and the process was different.
I mean, duh?
345mm
After telling my mechanic that I could change the brake pads on my 2018 Audi Q5…he said I couldn’t because I need a computer to do it….is this accurate?
Yes, but only when replacing the rear pads. You need a scan tool to disengage the rear electronic parking brake. If just replacing the front brakes, you don’t need a computer.
Nice, but I still have a squealing issue on my 2014. It not a small squeal it's load and disturbing.
I have the same problem. Even tried putting another new set of pads on and still squealing
SQ5 is a totally different style caliper.
Mus man nicht elektronische Parkbremse rückstellen bevor man die Bremsen wechselt.
Local Audi dealership quoted me $3,300 for front and rear brake pads (not even rotors) for my ‘13 Q5 😂 I walked straight out the door.
i think mine was close to $3k @ Audi dealer after $100 "coupon". front and back. vs $650 for parts and some grunt work. bonus was being able to brush off rust and repaint rear calipers with high heat rustoleam, and make sure parts were greased up properly. no squeaks!
Hub was not clean ;(
Guys please use brake cleaner on your rotors first.
Not when they are coated like these. Non coated rotors come with oil on them in the packaging to prevent rust which should be cleaned off prior to installation.