Removing the Engine from my *CRASH DAMAGED* Fiesta 1.0 Ecoboost | CoPart Salvage Car
Вставка
- Опубліковано 1 лис 2021
- In the last video you saw on my salvaged Fiesta MK7 1.0 Ecoboost that I got from CoPart, we found out that it had some pretty serious engine damage and I discussed a couple of options I had for repairing it. It turns out that in order ti do the head gasket replacement on these engines you need some very expensive tools and it is likely that I would find further damage ti the head or even the block. So I decided that it would be best to get the engine either professionally rebuilt or to just replace it. Either way, that means one thing need to happen, the engine needs to come out!
I hope you enjoy the video!
Music Credits
----------------------------
Fall With Me - Jim Yosef
Song: Jim Yosef - Fall With Me [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/FallWithMe
Watch: • Jim Yosef - Fall With ...
Make Me Move (feat. Karra) (Tobu Remix)
Song: Culture Code - Make Me Move (feat. Karra) [Tobu Remix] | NCS Release
Music provided by NoCopyrightSounds
Watch: • Culture Code - Make Me...
Download/Stream: ncs.io/TobuRemixCr
#Fiestamk7 #ecoboost #engineremoval - Авто та транспорт
Good video pal, really well done!
Love that, thank you mate 🙏🏻
Great effort lads! I would go for the engine rebuild, would be good to see the content on the channel
Hey from Florida. I bought a used 2015 Ford Fiesta with the 3 cylinder engine. 123hp 148 pounds of torque with the boost. Car has been good so far. Hopefully it will last, still paying on it. It seems that the 3 cylinder Fiesta's are not as common over here in the states. Great video, I learned a lot just from watching. Hopefully I'll never have to do what ya'll did.
Hey man, thank you 🙏🏻 hopefully you’ve got a good one there 👌🏻 and no hopefully not 🤞🏻
Ah wicked! And co hosted by Ash! Awesome guys. That car has alot of wiring Yuck! Step by step engine rebuild would be awesome content. But you have to play the numbers.👍
Thanks mate, at least I know what I’m doing with the wiring 😂
Nice picture at the end! Pulling out an modern engine really is a big accomplishment that deserves some celebration
I think health and safety is the biggest concern with doing this, how much does your average engine weigh quarter of a ton? That falls on you it ain't going to end well. I would have liked to see the guys use that engine lift brace bar they used when taking the gearbox out of the Mk6 just as an added precaution before the crane came in
It was honestly easier than I thought! Small engine though I guess. Engine weighs 97kg dry, crane on that setting was rated to 1T and the chains bought that day were good for 150kg. Granted it was a bit sketchy on the gravel 😂
@@MendItModIt Chains rated for 150kg?!
Were they made of Chinesium?
I mean a few strands of hemp twine holds more ^^
@@benghazi4216 I thought that, they were cheap 😂
If you look at the belt tensioner, there’s a slot for a 1/2 extension, you use a ratchet and extension in that slot to release the tension off the belt not the t30 bit
I didn’t notice, thanks for the tip 🙏🏻
14:31 You could use an offset socket :)
How you getting on with the engine? Just about to strip one down and rebuild it
Well done to you and ash, oil filter for ash now.
‘Ash changes the oil filter’ video coming once the engines fixed 😂
@@MendItModIt “ash changes oil filter with a shaft dangling in his face”🤣🤣🤣🤣
I had a 140 ecoboost black edition, from what ive learned is the 140 and 125 are identical, apart from the map.
I have been told this aswell.
our 2013 ,125 bhp ecoboost fiesta is sitting at 108'000 miles, original clutch etc
If we keep it long enough to need to timing belt changed (a big £££ job) I fancy a cheeky 140 remap 👍
Thanks guys, I’m sure there’s something in the gearbox too but if it’s just those 2 things then happy days
@@MendItModIt
I wonder what they did in the gearbox
Bit ridiculous, but would an ST150 engine fit in the Mk7, they are normally pretty similar generation to generation. It would certainly be one of the few if not only Mk7 with a 2 liter engine around. 😆
Looking at how they’re both mounted etc it’s quite possible but I’d essentially have the same car twice just in different clothes 😂
Repair if it's not silly money, also serves as a guide to people visiting your channel in the future with the same issue, Either way, what's a better advert when that day comes to saying to a potential buyer "oh here's my series on YT on all the things I've fixed". It'll sell itself. And lots more views for you with multiple vids. Everybody wins!
I get what you’re saying and that’s what I want to do but one of the tools to do it costs 80% of the cost of a rebuild/replacement 😫
12:02 🤣🤣
Break for parts or secondhand engine with guarantee.
Definitely worth repairing with what I paid vs how much they’re worth. But a rebuild would be more reliable than second hand replacement is my thinking 🤔
find the original air filter for this fiesta
You had a bad experience with cone filters on these?
Scrap the current lump …up grade to a 1.6 eco boost map it to 350 odd 😂😂…
I don’t need 2 ST’s 😂
@@MendItModIt
Yes you do this 1 be quicker ..😂😂😂
new engine or st180 engine, wouldn't bother getting it rebuilt
Definitely keeping it 1.0, and the cost of rebuild/replacement are similar, in my opinion the rebuild would be more reliable
I would go for a different engine but not another crap eco boom lol
Eco boost Engines are perfectly reliable and long lasting , but you really need to service them on time and use the correct oil , to many diyers or Non Ford service centres like Quivkfit use cheaper oil then you get problems
@@themadcoachman yea that's the thing the very high maintenance fussy heaps of crap we have had them come into work that have been serviced at ford and they still randomly shit them selves I hate the poxy things
I see where you’re coming from but I want to keep it 1.0 as a daily with my ST150 as the fun car. I’m also interested to compare the two with similar BHP figures out the box
Give some cheap sealer products ago 🤣🤣
Have to be damn good products to seal 80% leakage 😂😂
St 180 engine in it
Keeping it 1.0 I’m afraid. My MK6 will be the fun car 😏
Drop a 180 lump in it
Keeping it 1.0 I’m afraid, so I can push my MK6 ST performance wise
whenever i see this engine in a ford i just click and move on,i like what you are doing but personally i would just want to put an axe in it
Maybe not the best but supposedly with proper maintenance they aren’t so bad, plus this one failed because it was crashed 😫