I fill my small funnel which is 3oz. That amount seems to work the best for my water quality and equipment. Start out with 2oz. and give it a try. if the foam is weak add another oz. to the bottle one at a time until you figure out the measurement that uses the least possible shampoo but still gets the foam quantity you want. After you figure out the measurement get a small funnel and mark it with the correct measurement so that from there on you have consistent results. The adam's shampoo is so thick that you can use the funnel as the measuring device. Some of this trial and error method is because everyone's local water quality is different. Thanks for watching.
I just painted my Karcher gray to match my garage theme. Looks so much better now. Thanks for the idea. I even took off the Karcher sticker and replaced it with my business logo.
Thanks alot. I want the channel to focus on good bang for your buck products that I personally enjoy using. I have more good stuff coming soon. Thanks for subscribing and commenting.
Love your videos man straight to the point and honesty 👌🏻, quick question, I have a Craftsman Gas Pressure Washer 3100-PSI, 2.5GPM I’m planning on getting the MTM PF22 foam cannon do you think I should stick with the 1.4mm orifice or switch it to the 1.1mm orifice ? Thanks
I have a question, does more foam mean more cleaning power? Or does it just mean better lubricity? Or not? More foam def is more fun and can provide us with a good lubrication but as for cleaning power does it mean more clean lol.
Will hang on paint longer giving you longer working time and in effect better cleaning as it’s on there longer. Looks cool and is fun too. Don’t expect too much. Thanks for watching
Where do you buy the attachment for the foam cannon the connect on quick connects because when you buy the foam cannon it comes with nothing on the back
Mine has been going strong for about 6 months. Time will tell. I know a few people with it that also have had great results. The Karcher works really well in every way and is about the cheapest out there. At that price replacing it every few years after hard use would still be worth it. The next step up in my opinion is a Kranzle. I don’t see any reason to shop in the middle. Thanks for watching and commenting.
I’ve got a 2300 psi 1.2 gpm Ryobi and was considering an upgrade since the foam isn’t super thick. Would you recommend trying the MTM first with the 1.1 orifice? I see your machine is 1.2 gpm
You have to use a little more soap with the car shampoo to get good foam but it cost so much less that it’s worth it. The mega foam works good but for value and performance my vote overall is for the car shampoo. Thanks for commenting and watching.
Best part about detailing products on the market is that you can buy whatever you like or whatever makes you happy. Everyone likes different products and brands and generally speaking most do a good job. I do however think the MTM is a super solid built tool. I have had several of the major competitors cannons and the build quality looks quite a bit less thought out. Thanks for watching and commenting.
@@HawaiiDetailing how to attach everything all the connections and also actually reeling it up the reel, I have a MTM hose now 50ft with quick connect on both sides
@@jjjjjjjjjjjhjjjjjhjj this video best shows all the connections and reeling it up for the first time. ua-cam.com/video/BgIXIrFU8F0/v-deo.html The reel has a 3/8 female fitting inside the reel barrel and the MTM hose has a 3/8 male. Put 5-7 wraps of Teflon tape on the male fitting on the MTM hose and screw it to the female on the reel. After that reel it up. Connect your sprayer to the other end of the MTM hose. I use a quick disconnect here too. You now need a jumper hose to connect the reel to your pressure washer. There is a 3/8 90 degree fitting on the side of the reel. Connect the 3/8 jumper hose to the reel with Teflon tape the same as you did the MTM hose. On the other end of the jumper hose you need a quick disconnect on the hose and a 3/8 male plug on your pressure washer. You have to have the correct 3/8 plug to fit your pressure washer on the threaded side. There are different ones for some pressure washers. Connect those together and you now will have water from your pressure washer through the jumper hose, through the reel with the MTM hose to the sprayer. These parts are all listed in my descriptions for these pressure washer vids. Hope that helps.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Hi I have the same setup How much shampoo did you add in the foam cannon ?
I fill my small funnel which is 3oz. That amount seems to work the best for my water quality and equipment. Start out with 2oz. and give it a try. if the foam is weak add another oz. to the bottle one at a time until you figure out the measurement that uses the least possible shampoo but still gets the foam quantity you want. After you figure out the measurement get a small funnel and mark it with the correct measurement so that from there on you have consistent results. The adam's shampoo is so thick that you can use the funnel as the measuring device. Some of this trial and error method is because everyone's local water quality is different. Thanks for watching.
I just painted my Karcher gray to match my garage theme. Looks so much better now. Thanks for the idea. I even took off the Karcher sticker and replaced it with my business logo.
Nice. Good idea. Yeah the yellow is the biggest problem with the Karcher. Thanks for watching.
@@HawaiiDetailing HD series painted gray from the beginning. Maybe I'll go the same route and paint mine gray too.
@@donalexey it looks nice painted up.
Love the content and had to subscribe. Everything your reviewing is something the average person can afford and have.
Thanks alot. I want the channel to focus on good bang for your buck products that I personally enjoy using. I have more good stuff coming soon. Thanks for subscribing and commenting.
Your power washer setup is really neat
Thanks for watching
Excellent videos, BBQs to cars, my only suggestion is to wear googles when using any sprays. Good video editing work too.
nice setup bro
Thanks a lot.
👌🏽👌🏽 great video....... another one
Thanks a lot.
Love your videos man straight to the point and honesty 👌🏻, quick question, I have a Craftsman Gas Pressure Washer 3100-PSI, 2.5GPM I’m planning on getting the MTM PF22 foam cannon do you think I should stick with the 1.4mm orifice or switch it to the 1.1mm orifice ? Thanks
Start with the larger orifice. If it foams we’ll go with it. If you use too small of an orifice size you could damage the PW. Thanks for watching
@@HawaiiDetailing thanks for the reply 🙏🏻
There’s a great oriface calculator on mtm's website…input your specs and get the recommended size
I have a question, does more foam mean more cleaning power? Or does it just mean better lubricity? Or not? More foam def is more fun and can provide us with a good lubrication but as for cleaning power does it mean more clean lol.
Will hang on paint longer giving you longer working time and in effect better cleaning as it’s on there longer. Looks cool and is fun too. Don’t expect too much. Thanks for watching
Where do you buy the attachment for the foam cannon the connect on quick connects because when you buy the foam cannon it comes with nothing on the back
It should have came with it. Otherwise it’s a 3/8 QD plug. I can add a link for it to the description. Thanks for letting me know. Thanks for watching
What shelves are those holding the gallon bottles? tia
www.amazon.com/shop/hawaiitesladetailing?listId=3QNHS3YBPEVIR&ref=idea_share_inf
@@HawaiiDetailing thanks so much for the response
What is the longevity of the Kercher pressure washer? I heard Kercher washer last about a year.
Mine has been going strong for about 6 months. Time will tell. I know a few people with it that also have had great results. The Karcher works really well in every way and is about the cheapest out there. At that price replacing it every few years after hard use would still be worth it. The next step up in my opinion is a Kranzle. I don’t see any reason to shop in the middle. Thanks for watching and commenting.
I’ve got a 2300 psi 1.2 gpm Ryobi and was considering an upgrade since the foam isn’t super thick. Would you recommend trying the MTM first with the 1.1 orifice? I see your machine is 1.2 gpm
Yes I would for sure. If the orifice size is off it will affect the performance. That has to be dialed in for it to foam well. Thanks for watching.
I've got one too, no problem. Try warm water and Mr. Pink soap before spending more money.
Highy suggest getting the active ve52 pressure washer 2gpm at 210$
How does the Adams Car Shampoo compare to Adams Mega Foam?
You have to use a little more soap with the car shampoo to get good foam but it cost so much less that it’s worth it. The mega foam works good but for value and performance my vote overall is for the car shampoo. Thanks for commenting and watching.
Is there a way to make just water come out for the rinse portion without having to remove the foam canon.
No there is not. It way more effective with the 40 degree tip for rinsing. Thanks for watching.
@RICARDO after doing more research I figured it was quick disconnects is what I needed.
Hi, would you like to review the new MJJC foam cannon Pro?
Thanks for watching. Send me a message so we can discuss. hawaiitesladetailing@gmail.com
@@HawaiiDetailing so much sorry for the late reply as i missing your feedback. I have sent an Email to you.please kindly check it out. Many thanks.
What size orifice are you using on this foam cannon?
1.1
that one door on the titan will now be extra clean
Yeah. It’s the only clean one after a dirt bike run.
Hi,
Better than MJJC ?
I prefer the MJJC. It personal preference. Check out my review of the MJJC.
Thanks for your answer 👍
is that a 1/4 plug?
Yes it is. Thanks for watching
Best
It’s a good one. Thanks for watching.
Don't shake the product in the foam cannon swirl back in forth or you create pre existing bubbles
Or did you buy your gun?
There are links in the description where I got it. Thanks for watching
1st
1st like
Nice thanks for watching.
@@imdustyjames thanks we need some likes around here.
@@imdustyjames fake news I was first pal
Yeahh
1st!!!
You barely beat me.
@@Celiafa2000 better luck next time, I have instant notifications
Nice. Thanks as always. Love the race.
Nice. Thanks
2nd
Nice. Thanks for watching.
That one suck try chemical guy
Best part about detailing products on the market is that you can buy whatever you like or whatever makes you happy. Everyone likes different products and brands and generally speaking most do a good job. I do however think the MTM is a super solid built tool. I have had several of the major competitors cannons and the build quality looks quite a bit less thought out. Thanks for watching and commenting.
USELESS narrative , be more specific
What do you want to know?
I still can’t figure out setting up the hose reel
Did you get it resolved?
I still can’t figure out setting up the hose reel
What questions do you have?
@@HawaiiDetailing how to attach everything all the connections and also actually reeling it up the reel, I have a MTM hose now 50ft with quick connect on both sides
@@jjjjjjjjjjjhjjjjjhjj this video best shows all the connections and reeling it up for the first time. ua-cam.com/video/BgIXIrFU8F0/v-deo.html
The reel has a 3/8 female fitting inside the reel barrel and the MTM hose has a 3/8 male. Put 5-7 wraps of Teflon tape on the male fitting on the MTM hose and screw it to the female on the reel. After that reel it up. Connect your sprayer to the other end of the MTM hose. I use a quick disconnect here too. You now need a jumper hose to connect the reel to your pressure washer. There is a 3/8 90 degree fitting on the side of the reel. Connect the 3/8 jumper hose to the reel with Teflon tape the same as you did the MTM hose. On the other end of the jumper hose you need a quick disconnect on the hose and a 3/8 male plug on your pressure washer. You have to have the correct 3/8 plug to fit your pressure washer on the threaded side. There are different ones for some pressure washers. Connect those together and you now will have water from your pressure washer through the jumper hose, through the reel with the MTM hose to the sprayer. These parts are all listed in my descriptions for these pressure washer vids. Hope that helps.