Does there have to be a sheet with holes on the inside? Can it just be a pipe? Mechanically speaking in terms of safe for the bike. I don’t care much about legality. Just don’t want to hurt my bike.
Thanks. In this case nothing without cutting one cap, changing the wool and rewelding, but this is ceramic wool and it will last a long time. I made one with removable caps. ioutu.be/BKvkIKd0FaI
What would happen if the holes in the perforated sheet were big? (Something like 10/15mm) Because I'm thinking that it would have better sound but the packing wouldn't last that long
I haven't tried it, but I thought there wouldn't be a noticeable difference, just that the pack wouldn't last long as you mentioned. The diameter and length of the perforated tube have a bigger effect than the diameter of the holes
It's not that easy. Let's say like this, the larger the diameter of the perforated tube, the deeper the tone. It also depends on the diameter of the inlet and outlet pipes.
@GPGarage1 Hey great video, does the perforated screen deaden sounds at all? I make some custom mufflers and they are super loud, looking for ways to lessen the sound, I have tried the packing stuff and it didn't make any difference, any advice would be much appreciated
I use pipes because I don't have anything to bend sheet metal with. Sheet metal and pipes are 2 mm, because I make this from waste material, and if I were to buy it, I would not go over 1-1.2 mm thick.
@@GPGarage1 muchas gracias amigo,veo todos tus videos,quieres decir que si tuvieras curvadora de chapa lo harías mejor con chapa en ves de con tubos verdad? Daria menos peso a la moto,con 1mm de espesor lo ves bien?
Sound Check
ua-cam.com/video/0CzRso56Ug4/v-deo.html
I've seen a couple of these now. You should be adding an attachment tab.
Great work…Great video…love how you show the work and the details.
Thanks man
Very nice❤
nice mufler
Nice
Very good but where's the legally required spark arrestor?
Does there have to be a sheet with holes on the inside? Can it just be a pipe? Mechanically speaking in terms of safe for the bike. I don’t care much about legality. Just don’t want to hurt my bike.
What was the total cost of material?
Gauge is probably a bit thick but it looks pretty damn professional to me
Yes, the pipes are thicker than they should be. If I were buying material for the muffler, I would definitely take a thinner one.
how when need change the glasswool? maybe you can make it changeable glasswool?
by the way, thats nice job dude!
Thanks. In this case nothing without cutting one cap, changing the wool and rewelding, but this is ceramic wool and it will last a long time.
I made one with removable caps.
ioutu.be/BKvkIKd0FaI
Maybe do a sound check next time ☺️ so we could hear how it sounds
There will be a sound check next week I think.
Great video but need to hear the sound🙂
Thanks, here is video
ua-cam.com/video/0CzRso56Ug4/v-deo.html
What would happen if the holes in the perforated sheet were big? (Something like 10/15mm) Because I'm thinking that it would have better sound but the packing wouldn't last that long
I haven't tried it, but I thought there wouldn't be a noticeable difference, just that the pack wouldn't last long as you mentioned. The diameter and length of the perforated tube have a bigger effect than the diameter of the holes
@@GPGarage1 Thanks, so bigger tube diameter = better tone?
It's not that easy. Let's say like this, the larger the diameter of the perforated tube, the deeper the tone. It also depends on the diameter of the inlet and outlet pipes.
@@GPGarage1 thanks for the info
@GPGarage1 Hey great video, does the perforated screen deaden sounds at all? I make some custom mufflers and they are super loud, looking for ways to lessen the sound, I have tried the packing stuff and it didn't make any difference, any advice would be much appreciated
Is there a way of emailing you a muffler design???
Yes, here is email
perogojkovi@yahoo.com
Love frome bangladesh
Plese sond test video uplod
Hi, here is sound check video.
ua-cam.com/video/0CzRso56Ug4/v-deo.html
Amigo que espesor usas de chapas? El exterior es un tubo o chapa soldada por usted? Gracias de antemano saludos desde España
I use pipes because I don't have anything to bend sheet metal with. Sheet metal and pipes are 2 mm, because I make this from waste material, and if I were to buy it, I would not go over 1-1.2 mm thick.
@@GPGarage1 muchas gracias amigo,veo todos tus videos,quieres decir que si tuvieras curvadora de chapa lo harías mejor con chapa en ves de con tubos verdad? Daria menos peso a la moto,con 1mm de espesor lo ves bien?
Yes, it's hard to find a pipe, for example fi 110 1mm thick, and with a sheet metal bender you have more options for diameter of the muffler.
@@GPGarage1 thanks very much friend,is there any way i can contact you privately?
You can contact me on Instagram
gp_garage_no1
Is the ceramic wool necessary?
You can use fiberglass. The best way is, first stainless steel wool, then fiberglass or ceramic wool.
Sir,what is that white cotton type thing?
It's ceramic wool.
@@GPGarage1 thank you
How thick is the stainless
Hi, If I remember correctly, muffler case is 2mm and other is 1.5mm, but there is no need for such thick material, 1mm or 1.2mm is enough.
@@GPGarage1 thanks alot
So it cant be repacked ?
One side must be cut off, repackaged and rewelded.
Bro i need this i will pay y
Yar dedo ek