Before video.. was hell tryna figure out how 2 do this an not having a metal tip pen.. lost my original spring it flew 2 twice. Found it 3rd it gone!! After oh an broke a little off of the new spring .. after video 5 minutes very smooth easy lol Ty for great video.. I'm glad my spring is actually working hope it hold up lol..
Excellent video with great detail! I ran into hours of problems because on the 2nd middle piece for the left side driver. The proper side left side for my car in the United States was not to spec in the center hole and so I didn't think it fit, and thought it was for the right side and so I went for hours trying to make the right side work and it would only lock into left or right, but not both. I forced the left side piece on to the center post and it worked perfectly! I finally did a visual check for the cutout on the broken piece and realized I was using the right side piece. Cheap manufacturering with low specs tricked me into thinking the left side was the right!
THANK YOU THANK YOU THANK YOU!!!!!! This was literally the only video I found where the lock was put together the correct way. Following the other ones, I always ended up with a stuck key and so needed to break the entire lock again. Thank you again for your work!
You are welcome. :) I understand your excitement since I was searching UA-cam my self and did not find any good video on the WHOLE process. That's when I decided that If I ever will put the lock together I will make the video my self. Cheers buddy. :)
👏🏻👏🏻👏🏻👏🏻 Man, I was watching another guys video and he said it would take 5 mins, me 1 hr and a half later. He didn’t go into detail at all like you did, telling us what to align and easy to follow step by step tutorial. 👏🏻👏🏻👏🏻👏🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻 Thank You!!! And keep those videos coming.
I haven't bought the stuff for this, but my son's key came out with the part and we need to repair it. I need to order the parts and will follow along with this video.
Excellent video. The pin with the replacement kit has no chance of fitting and mine apparently fell out, and I couldn't locate in bottom of door. Used a coat hanger where I slightly ground some material away with a bench grinder. Was able to fit snugly into the clip holder's pin hole. Be sure to clean the parts you're re-using and lube with grease.
Happy to help. Though I think I missed the terms vice versa. So to be sure I was setting up the tumbler for car that have steering wheel on the left side of the car if you would be sitting in the car. 🙂
For me? Close, but no cigar.....You have the best video on UA-cam for this. I have a RHD model and am following your instructions to the letter with the exception that the second housing used is for RHD. Once put together, the key only turns quarter way in one direction only (to lock the car, but cant open it). Any ideas?
Make sure you align everything as I did and while you do so, try to move the key both directions to see at which moment it is getting stuck. When you put the key inside the barrel 1:12 you should be able to turn it 360 degrees. Then step by step you assemble it and keep checking if the key still moves +/- 90 degrees. Hope this helps to pin down the issue.
Great detailed explanation. Am sure I got one of the many different things (key barrel, 3 rings, last of which is different for L/R-hand drive, stem) that needs to be the right way round wrong and managed to rotate the key to a position where I couldn't rotate it back to the original position to be able to extract it. Nightmare scenario with key and lock barrel permanently united and neither useable but happily managed to extract the key from the barrel by part-sawing through the U clip with a hacksaw from above and then breaking it off with pliers (the U horseshoe clip had rotated so the closed end was blocked from being pulled off the final stem by the main lock body). Lucky the repair kits (including horseshoe clip) are so cheap, around £3! :-) Btw did anyone have issues with their convertible soft top retracting and windows coming down randomly when turning the key in the broken barrel? That was my original nightmare with the car fully open to the elements and public, no easy way to close the top (roof close button flashing red) and rain on the way! Actually, thinking about it been a nice car to drive in the Summer but no end of dramas too :-D
Thank you. Yes the parts differ. You can see the part that is different on 2:50 Usually when you buy a rebuild kit you should get both of them so you can choose which side you are fixing, but you have to check with where you buy the parts.
Check if the lock is locking the door while lock assembly is removed form car. You can do it with long screwdriver. Next up is to check between each of the assembly steps if the key is still turning both ways. That's how you can pinpoint where is the problem and then solve it.
Did you need a key to remove the cylinder out? Or can you remove the complete cylinder with no key? Mine seems to keep spinning and doesn’t want to come out I need to retrieve the cuts from the cylinder to make a key.
@@tommyherrera6456 Ah wooow. What a tool. Did some digging. Verry interesting. So you lost a key? I wonder about the ignition. If you recreate the key you can open the door but still can not start the car because of the immobilizer, right?
@@mr.matissCorrect lost all keys. Used lishi hu92 to retrieve the key cuts, then I programmed the key to the vehicle by removing ews. Forgot to tell you I’m a locksmith
I think no the metal.itself will not rust. If youbreally want you can add few drops while assembling. Mine was greased from factory and good to go with orieginal grease.
Another Er46er passing on their gratitude. You’re a star. Many thanks.
Happy to help. :)
This is the best video for this subject because it starts at the beginning and show all the orientations. 👌
Thank you for showing the whole process, my lock was just spinning in there and not in proper position. Fixed it!
Before video.. was hell tryna figure out how 2 do this an not having a metal tip pen.. lost my original spring it flew 2 twice. Found it 3rd it gone!! After oh an broke a little off of the new spring .. after video 5 minutes very smooth easy lol
Ty for great video.. I'm glad my spring is actually working hope it hold up lol..
thank you for showing how to do it step by step🙏
Really great! Now it works at my BMW... thank you!
Muchas gracias por el video. A pesar de que no sé inglés pude repara la cerradura gracias a tu video
Only usefull video, thanks. Greats explainations. Thanks dude.
My 330i touring love this video
Excellent video with great detail! I ran into hours of problems because on the 2nd middle piece for the
left side driver. The proper side left side for my car in the United States was not to spec in the center hole and so I didn't think it fit, and thought it was for the right side and so I went for hours trying to make the right side work and it would only lock into left or right, but not both. I forced the left side piece on to the center post and it worked perfectly!
I finally did a visual check for the cutout on the broken piece and realized I was using the right side piece. Cheap manufacturering with low specs tricked me into thinking the left side was the right!
THANK YOU THANK YOU THANK YOU!!!!!!
This was literally the only video I found where the lock was put together the correct way. Following the other ones, I always ended up with a stuck key and so needed to break the entire lock again. Thank you again for your work!
You are welcome. :)
I understand your excitement since I was searching UA-cam my self and did not find any good video on the WHOLE process. That's when I decided that If I ever will put the lock together I will make the video my self. Cheers buddy. :)
You rock! This pen tip is very helpful. Thanks
Your Video is very helpfull, thanks
Sehr gut erklärt und sehr gute tips wie man den Schloss repariert 👍👍
I hope this helps you to fix the key assembly.
@@mr.matiss It works 😃👌
Thanks a lot!!!!
Clean and easy to follow.
Good explanation.
Seen other few videos of the lock assembly but this one is the most detailed and it as also helped me to fix my e46 lock. Thanks alot amazing video👍👍👍
super video explicative merci ...
Perfect video!!! Thank you very much, the best video of all ❤❤❤
Happy to help. :)
👏🏻👏🏻👏🏻👏🏻 Man, I was watching another guys video and he said it would take 5 mins, me 1 hr and a half later. He didn’t go into detail at all like you did, telling us what to align and easy to follow step by step tutorial. 👏🏻👏🏻👏🏻👏🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻 Thank You!!! And keep those videos coming.
I think I watched the same video and that's when I decided to make my own when I finaly understood how to assemble it.
Excellent video! Thank you so much
I haven't bought the stuff for this, but my son's key came out with the part and we need to repair it. I need to order the parts and will follow along with this video.
I hope you fix it. Fingers crossed. Its not a complicated job if you do it slowly and prepare all the tools prior to starting the job.
You saved me, when I pulled out everything trying to fix locks. Now I changed only one part and everything working good. Thanks a lot! 😁
Using this and another video on how to move the cylinder pins, I was able to to adjust a new aftermarket lock to my existing key. Thanks, dude!
Which other video did you mean? Can you send a link please :)
@@user-jf3zd6om1g ua-cam.com/video/aJbltQ4OnG8/v-deo.html
After 2-3 hours of spring cuts and the spring hitting my eye I finally got it 😭very useful video
Thanks for the awesome video. It took me a while but with trial and error I finally fixed my door lock. Can’t thank you enough!
You are welcome. :)
Thank you very mutch... I watch many Videos but your Video is better than all other
Thank you so much dude you helped me with this 👍👍👍
Most useful and clear instructed video of all👍 i changed the lock as you demonstrated and worked 💯🙌
Just wanted to say thank you. This helped me a lot.
Thank you dude. I've did it a lot of times, but never used a pen. It's very usefull.
You're welcome! 👌
Thanks for the video
Worked great!
good video, very helpful
Great!!! Best Video I´ve seen on YT.THX
thanks for your helpfull video, especially the spring-thing :D
Thank you it perfect described
Excellent video. The pin with the replacement kit has no chance of fitting and mine apparently fell out, and I couldn't locate in bottom of door. Used a coat hanger where I slightly ground some material away with a bench grinder. Was able to fit snugly into the clip holder's pin hole. Be sure to clean the parts you're re-using and lube with grease.
Perfectly explained, helped alot thanks!
Thats exactly what I was looking for. Tks a lot
You are the best. Thanks for your help
Thankyou so helpful as shows the key barrel alignment !
Thank you very much! Excellent video👍
Thank you for this video my friend!
Happy to help 🙂
Excellent tutorial, thank you very much!
Gracias!!! Muy bien explicado.... bravo 👏👏👏
Pen... genius!!! My pliers kept slipping
very good video bro. this helps a lot.
Nice to hear that. :)
ya habia visto 4 tutoriales pero solo este se ve bien cual de los 2 repuestos hay que poner, gracias
very good class, and easy, work with 2007 328xi too
Veryyyyyy gooooooood
Muito bom obrigado 😀👏🏻
Thanks, you saved me by explaining the 2 brackets are for left and right hand drive xD
Happy to help. Though I think I missed the terms vice versa. So to be sure I was setting up the tumbler for car that have steering wheel on the left side of the car if you would be sitting in the car. 🙂
@@mr.matiss your explanation was good! It's called "left hand drive".
Ohh good. Thanks Captain. 👌
thanks xD i had right hand drive so is usefull too :D
For me? Close, but no cigar.....You have the best video on UA-cam for this. I have a RHD model and am following your instructions to the letter with the exception that the second housing used is for RHD. Once put together, the key only turns quarter way in one direction only (to lock the car, but cant open it). Any ideas?
Make sure you align everything as I did and while you do so, try to move the key both directions to see at which moment it is getting stuck. When you put the key inside the barrel 1:12 you should be able to turn it 360 degrees. Then step by step you assemble it and keep checking if the key still moves +/- 90 degrees. Hope this helps to pin down the issue.
Muy bien explicado gracias 👍
Bro. I love you.
thank you!
Very nice 😊👍👍
What if my little key assembling isnt at sme position(straight) but one is like out ?
Great detailed explanation. Am sure I got one of the many different things (key barrel, 3 rings, last of which is different for L/R-hand drive, stem) that needs to be the right way round wrong and managed to rotate the key to a position where I couldn't rotate it back to the original position to be able to extract it.
Nightmare scenario with key and lock barrel permanently united and neither useable but happily managed to extract the key from the barrel by part-sawing through the U clip with a hacksaw from above and then breaking it off with pliers (the U horseshoe clip had rotated so the closed end was blocked from being pulled off the final stem by the main lock body). Lucky the repair kits (including horseshoe clip) are so cheap, around £3! :-)
Btw did anyone have issues with their convertible soft top retracting and windows coming down randomly when turning the key in the broken barrel? That was my original nightmare with the car fully open to the elements and public, no easy way to close the top (roof close button flashing red) and rain on the way! Actually, thinking about it been a nice car to drive in the Summer but no end of dramas too :-D
oh man. What a nightmare it sounds. Happy you got out of it. Safe travels!
Recently encountered the same problem with key cylinder…but my problem now is how to open the car? Any advice? Many thanks
Rock solid!! Thanks!!!
Excellent video!
Any idea is the internal parts are the same on E60?
Great.
I have no idea since I have not disasembled tumbler on E60. I bet google might help.
Thank you dude the Trick With the pencil was fcking Good
Good video. Is left hand and right hand have different parts?
Thank you. Yes the parts differ. You can see the part that is different on 2:50
Usually when you buy a rebuild kit you should get both of them so you can choose which side you are fixing, but you have to check with where you buy the parts.
How did you get the notches from the key cylinder to line up with the 2nd part you add for the tumbler?
What time it is in video?
Thx
Managed to reassemble and fit into the door. Only problem is that the key is locking the door, not unlocking it! Help!!!
Check if the lock is locking the door while lock assembly is removed form car. You can do it with long screwdriver. Next up is to check between each of the assembly steps if the key is still turning both ways. That's how you can pinpoint where is the problem and then solve it.
Good vid, question is where and who did you purchased the repair kit?
I think it was ebay. It came with replacement kit for both driving sides.
@@mr.matiss Thanks Matiss. Well done detailed video.
🖤👍
Did you need a key to remove the cylinder out? Or can you remove the complete cylinder with no key? Mine seems to keep spinning and doesn’t want to come out I need to retrieve the cuts from the cylinder to make a key.
I think you need the key to be inserted. Otherwise it is locked inside.
@@mr.matiss yes I figured that out 😂 I ended up using a lishi to retrieve the key cuts
@@tommyherrera6456 Ah wooow. What a tool. Did some digging. Verry interesting. So you lost a key? I wonder about the ignition. If you recreate the key you can open the door but still can not start the car because of the immobilizer, right?
@@mr.matissCorrect lost all keys. Used lishi hu92 to retrieve the key cuts, then I programmed the key to the vehicle by removing ews. Forgot to tell you I’m a locksmith
Wehre can i get the tool,
If you know can pleas send me the home page, thanks
Which tool? You mean the pen?
U made me even more pissed off
Good to know
no need to put lubricating grease?
I think no the metal.itself will not rust. If youbreally want you can add few drops while assembling. Mine was greased from factory and good to go with orieginal grease.
@@mr.matiss thanks , great job!
Спасибо.