Good article. However, this is dealing with identifying noises .... could you please NOT have music competing with the noise that we are trying to identify? thanks
He identifies as that particular rhythm and sound and you are trying to suggest genocide for his kind? Please do not try and diminish this individuals (or they) prefered pronouns! Thank you and have a nice day! ❤🦄🧚♀️
One of the most comprehensive troubleshooting video, I have ever seen. It even has a "sample foreign objects" for each troubleshooting issue. Thanks a lot.
I really appreciate this speaker's clear explanation of each troubleshooting example. I was amazed by all the potential issues that occur from lost items migrating to the inner workings of the washer! This was an extremely valuable presentation. Thank you.
I can't thank you enough! I had a very loud noise during fast spin cycle. I cleaned out the drain pump trap and found nothing. After watching your video, I went back to the drain pump and looked inside. WOW there was a twist tie stuck further in. You saved me a BIG bill. THANKS AGAIN!
That machine had a lot of issues. Stuck clothes, coins, bra coils, plastic and metal objects... I'm surprised it didn't have a dead body in there, too! 😂
My washer was making turbine loud noise when spinning i replaced the bearings and wala back to normal. 3 months later its starting to get loud again could it be the bearings again?
Brilliant video. I heard the sound my machine is making in this video and sure enough after spending half my weekend pulling it apart the problem was exactly as predicted in video.
@Ruby Ruby It was the spider assembly. it matched the sound in the video perfectly and when i pulled the machine apart the spider assembly had eroded right through and fell apart in my hands!
What would be the average cost of replacing the main bearings in such a washer? I'm trying to figure out if it's worth even trying versus buy-in a new one.
Waow, nice preparation. A tie, a sock, a bra clamp, a coin, a broken filter...so basically anything what could go wrong. Now I know where to start checking. Thanks for the video!
Excellent video! Very helpful! Sadly I either have a bad set of bearings or the tub support is broken. The tub does not spin freely, is loose when I push from the front to the rear, and has a burnt rubber/plastic smell - the wet clothes actually smell like burnt plastic. Argh.....
A year on from this and your still helping people thank you matey you've saved me more than a few quid on an expensive repairman for a lose drum baffle
Hi. Great Video. I have a Bosch Next Washer. How do I remove the Pedestal Drawer so I can see if I’m able to access the bottom of the front loader, see shocks. Also the large round spring that holds the seal in place between basket and door. Please demonstrate how to Remove it and more importantly how to put it back. Please I need your help. Thanking you in advance Sir. All the best to you and family, Mike i.
Thank you so much for this video. Thought that the bearing was gone and followed your advice in the video and it turns out that one of the tub supports had worked loose. I tightened the securing screws and finally peace and quiet! Thought we were going to have to replace the machine and had gone around the stores looking for a new machine. Now that its fixed I have told my wife that we should get another 12 years service! Not sure she's a pleased as I am! Brilliant instructions!
This should be the first thing to try. Most modern machines are designed to be perfectly level orientation and have adjustable feet to allow that. If the machine is tilted, the suspension doesn't work correctly.
Why are all these videos nowadays accompanied by IRRATATING noise? It's not music, just a few repetitive notes-over & over again. DISTRACTING from listening to the presenter or hearing the sounds to identify faults in this case. I'd rather hear the natural sounds or nothing at all.
This video saved me some grief. I was about to take my washer apart because it was making a clicking noise during the spin cycle. I checked between the drum and the rubber ring and sure enough there was a coin there.
My front load whirlpool makes a bearing type noise the first 30 seconds of the day of using it. After that it never happens again the whole day. What gives? Does the motor need warming up or something?
What would cause a humming noise from the motor that's just unusually loud during spin cycle? Not necessarily abnormal in character per se, but definitely abnormally loud. No grinding or knocking or any other sound. But I've heard very loud machines in the past, but none like this one. P.S. the machine is fairly new. I rent, it was used by the previous tenant, don't know if this is a new development or not.
Thank you for such in-depth knowledge. It was very insightful. Being a first timer, I was not aware that there could be so many reasons for unpleasant sound.
My washer is spinning very fast during the cycle period, it's so fast I'm friend it might launch into orbit. Guessing it maybe be a bearing? any helpful hints?
EXCELLENT vid. i went right to work! my noise was the tip of the rubber hose (6:15) fell in into the drum, and the drum was rubbing it will spinning. all fixed!
My front load GE washer sounds like an airplane is taking off. It is a very loud whirring noise. What could be the problem? It seemed to happen after I was trying to clean the fluid paths making sure water could flow and lint was not building up. Could I have pushed something into the bearings? Is it possible to clean?
Had mine noisy it was vibranting , eventually it stopped spinning. Thought that belt came loose , opened to realise thta 3 out of 4 motor mounts (made of plastic) disintegrated Samsung eco bubble are rubbish
Haha, this dude must have a collection of broken washers to have an example of each incident yet mostly in the same brand, "washers everywhere, everywhere son".... Incredibly helpful thanks loads I can tell this took time to produce you did a great job, the music isn't too loud at all and you have exampled and explained things very clearly thank you......👍👌👍
My washing machine wasn't spinning off the water from the clothes properly. I found a bit of plastic in there. Seems to run ok now, but has a ticking sound when it spins. Is that normal please?
my lg4270hwa will not drain. i replaced the drain pump, drained the line and checked the filter, spins while in test mode but not when it comes to drain. pls help, thanks
OH THANK YOU! Shined a light through the outer drum and saw (from inside the basket) what looked liked a pen laying over the top of the drain. Removed the rear panel and pulled the drain hose. Managed to extract a nail set...not a pen. Was randomly making quite a racket! Thanks SO much!
Can you help me troubleshoot my mom’s dryer it’s a war pool dryer is not heating it’s me in America USA it is not healing that well could you please help me find out why my mom‘s dryer is not heating it’s a whirlpool dryer guy from Xander and
This is by far the best video on washing machine issues in youtube! Honestly, I don't know why the youtube algorithm had not brought me here before! Thank you, sir!
Dude my top loader tries to kill my family it’s not even a Samsung my mom looked inside of the washing machine after it fell over 4 towels were at one side of the drum and it happened again at night if the same day
This video is gold. This entire channel is gold mine! Thank you very much for sharing 👍🏼 Any other time we’d call a technician to fix the washer or probably just get a new one. Now with the lockdown and home quarantine... we have to do things on our own and this video is a saver. Thank you very very very very much ♥️
At the 10min mark with shocks. I replaced mine and it didn't help. Is it possible the top springs are defective? It's 8yrs old and banging on the spin cycle no matter how balanced the load.
Hi Thanks for the detailed troubleshooting, but I still can't figure out the cause of the scratching noise of my machine...Recently, my front loader produces some sort of scratching sounds when it’s on the washing cycle when it spins slowly. No such sound is produced in the spinning cycle when it spins at high speed. I tried to check the drum after I took the clothes out but couldn’t anything stuck in it. Any ideas for the reason?
It is possible there is something between the inner and outer tub causing that sound.. At high speed the item is being pushed out of contact by centrifugal force. Is it every load or an occasional one you are hearing this noise? What model of machine do you have and how old is it?
@@partselect thanks for getting back to me! It's most loads but not every load so I found it really weird. My machine is a BOSCH series 4 and about 6 years old. I guess I'll have to get someone to dissemble the machine to check it out?
Front loaders that are making a thud noise are most likely is a broken suspension shock. Your machine may also be vibrating or moving around a bit more as well.
Thanks I Appreciate all your knowledge and great video. I still don’t know how to figure out why my machine just shakes and sounds like it’s going to blowup eek 😱 rattles while’s spinning too but while washing or doing cycle it’s just vibrates the whole house and interrupting noice I’m good at fixing things but I’m afraid of appliances repair it’s expensive 😢
This guy almost makes me believe I could fix my washing machine if it broke down! I'm a computer geek and should not be allowed to touch any appliance with a wrench in my hand, I know this. But still, he ALMOST makes me believe I can!
8:50 - have a GE front load washer that makes a chirp /squeak noise on the wash cycle when the basket changes direction. Normal sounds on all other functions. what could be making that sound? Happens more with a larger load.
My 2 year old at most Samsung smartthings had the banging noise it seems to be lose bolts that hold the balance weights on. 1 bolt fell out and 2 others were very loose. I tightened them back up and it seems fixed 🤞🏻
2 дні тому
I have the same issue with Samsung washing machine which is less than 3 years ago. One bolt attaching balance weight is sheared and the other is completely loose and fell down. Do not buy any Samsung washer. They do not even toghten bolts.
I have a polystyrene block which I have no idea where to put back. It came out when I removed the back. It looks like it's supposed to be dampening so I can't put it back together until I know here I goes. 😢
Mine makes a squeaking noise of drum rubbing against seal and goes Da Dum Da Dum when I spin the drum. The drum freely turns with no problems. It won't spin off properly and the clothes are wringing wet when I open the door. I checked the belt and everything mentioned in this video and I still can't work out what the problem is. Nothing in the seal and the filter's clean. The machine's only 4 years old, so probably not the bearings. Also I never overload it, so I've no idea what to do with it.
Yeah...chunks, 1/8" by 1/8" or smaller chunks of breaking down spider arm found in filter? Checked after poor draining and eventually violent shaking clunking which came later... I think I have that right...and it's an unhappy conclusion...
Good article. However, this is dealing with identifying noises .... could you please NOT have music competing with the noise that we are trying to identify? thanks
He identifies as that particular rhythm and sound and you are trying to suggest genocide for his kind? Please do not try and diminish this individuals (or they) prefered pronouns! Thank you and have a nice day! ❤🦄🧚♀️
@@ihavebeenben go away bot.
Can’t thank you enough I turned off your video and the music stopped. 😂
I've never seen a better diagnostic video. You even set up actual problems so we could actually hear and seem them. Outstanding!
Women and their damn braw wires !!! Lol
One of the most comprehensive troubleshooting video, I have ever seen. It even has a "sample foreign objects" for each troubleshooting issue. Thanks a lot.
I really appreciate this speaker's clear explanation of each troubleshooting example. I was amazed by all the potential issues that occur from lost items migrating to the inner workings of the washer! This was an extremely valuable presentation. Thank you.
L
I can't thank you enough! I had a very loud noise during fast spin cycle. I cleaned out the drain pump trap and found nothing. After watching your video, I went back to the drain pump and looked inside. WOW there was a twist tie stuck further in. You saved me a BIG bill. THANKS AGAIN!
I could listen to this gentleman all day he’s very professional and straight to the point 😊
That machine had a lot of issues. Stuck clothes, coins, bra coils, plastic and metal objects... I'm surprised it didn't have a dead body in there, too! 😂
Incredible wealth of knowledge in this video. I've learned more hear then the last 8 videos Ive watched. Thank you
My washer was making turbine loud noise when spinning i replaced the bearings and wala back to normal. 3 months later its starting to get loud again could it be the bearings again?
Excellent coverage of the most common problems with front-loading washers! Thanks for sharing your knowledge.
When we first do a load of laundry the LG machine stops and starts to the point that our copper pipes are shaking . !!!! Why is this .
Remove music from video so we can hear the noises better so we can diagnose our washer
Brilliant video. I heard the sound my machine is making in this video and sure enough after spending half my weekend pulling it apart the problem was exactly as predicted in video.
@Ruby Ruby It was the spider assembly. it matched the sound in the video perfectly and when i pulled the machine apart the spider assembly had eroded right through and fell apart in my hands!
What would be the average cost of replacing the main bearings in such a washer? I'm trying to figure out if it's worth even trying versus buy-in a new one.
Waow, nice preparation. A tie, a sock, a bra clamp, a coin, a broken filter...so basically anything what could go wrong. Now I know where to start checking. Thanks for the video!
P.S. You’re amazing.
Mike i
Excellent video! Very helpful! Sadly I either have a bad set of bearings or the tub support is broken. The tub does not spin freely, is loose when I push from the front to the rear, and has a burnt rubber/plastic smell - the wet clothes actually smell like burnt plastic. Argh.....
A year on from this and your still helping people thank you matey you've saved me more than a few quid on an expensive repairman for a lose drum baffle
This is amazing troubleshooting! Pretty much covered every noise related issue. Thank you so much!
No
75 downvotes? What’s not to like?
They might be the repair guys who do this for their earning😅😂
Hi. Great Video. I have a Bosch Next Washer. How do I remove the Pedestal Drawer so I can see if I’m able to access the bottom of the front loader, see shocks. Also the large round spring that holds the seal in place between basket and door. Please demonstrate how to Remove it and more importantly how to put it back. Please I need your help. Thanking you in advance Sir.
All the best to you and family, Mike i.
Thank you so much for this video. Thought that the bearing was gone and followed your advice in the video and it turns out that one of the tub supports had worked loose. I tightened the securing screws and finally peace and quiet! Thought we were going to have to replace the machine and had gone around the stores looking for a new machine. Now that its fixed I have told my wife that we should get another 12 years service! Not sure she's a pleased as I am! Brilliant instructions!
You are a champion sir, this helped me a lot 🙏🏼🙏🏼🙏🏼
I really wish there was an inspection port for the support / spider arm
If you've just installed or moved the washing machine you should check if it is level. That was my problem. It was so noisy during the spin cycle.
This should be the first thing to try. Most modern machines are designed to be perfectly level orientation and have adjustable feet to allow that. If the machine is tilted, the suspension doesn't work correctly.
Stop the music.
Why are all these videos nowadays accompanied by IRRATATING noise? It's not music, just a few repetitive notes-over & over again. DISTRACTING from listening to the presenter or hearing the sounds to identify faults in this case. I'd rather hear the natural sounds or nothing at all.
Thank you! Most other videos say clean the filter and if still a sound call a technician! U just saved me $$$$
This video saved me some grief. I was about to take my washer apart because it was making a clicking noise during the spin cycle. I checked between the drum and the rubber ring and sure enough there was a coin there.
You're the first video out of tens of videos that I watched that mentioned the concrete weights... that's what my problem was.
One of the best, most informative, videos I have seen. Great instructional/how to diagnose video!
Good Video.... However, would have checked that the Machine's adjustable feet were adjusted first before going into complicated procedures
My front load whirlpool makes a bearing type noise the first 30 seconds of the day of using it. After that it never happens again the whole day. What gives? Does the motor need warming up or something?
What would cause a humming noise from the motor that's just unusually loud during spin cycle? Not necessarily abnormal in character per se, but definitely abnormally loud. No grinding or knocking or any other sound. But I've heard very loud machines in the past, but none like this one.
P.S. the machine is fairly new. I rent, it was used by the previous tenant, don't know if this is a new development or not.
Thank you for such in-depth knowledge. It was very insightful. Being a first timer, I was not aware that there could be so many reasons for unpleasant sound.
My washer is spinning very fast during the cycle period, it's so fast I'm friend it might launch into orbit. Guessing it maybe be a bearing? any helpful hints?
EXCELLENT vid. i went right to work! my noise was the tip of the rubber hose (6:15) fell in into the drum, and the drum was rubbing it will spinning. all fixed!
My front load GE washer sounds like an airplane is taking off. It is a very loud whirring noise. What could be the problem? It seemed to happen after I was trying to clean the fluid paths making sure water could flow and lint was not building up. Could I have pushed something into the bearings? Is it possible to clean?
Had mine noisy it was vibranting , eventually it stopped spinning. Thought that belt came loose , opened to realise thta 3 out of 4 motor mounts (made of plastic) disintegrated
Samsung eco bubble are rubbish
Haha, this dude must have a collection of broken washers to have an example of each incident yet mostly in the same brand, "washers everywhere, everywhere son"....
Incredibly helpful thanks loads I can tell this took time to produce you did a great job, the music isn't too loud at all and you have exampled and explained things very clearly thank you......👍👌👍
This guy is awesome. Very informative and clearly instructional.
The background music is NOT helpful to the viewer, when demonstrating the various fault sounds!
My washing machine wasn't spinning off the water from the clothes properly. I found a bit of plastic in there. Seems to run ok now, but has a ticking sound when it spins. Is that normal please?
my lg4270hwa will not drain. i replaced the drain pump, drained the line and checked the filter, spins while in test mode but not when it comes to drain. pls help, thanks
I have the Neptune you showed and I was wondering if you have a clue why the rinse function is quite loud all of a sudden during spin cycle rinse
OH THANK YOU! Shined a light through the outer drum and saw (from inside the basket) what looked liked a pen laying over the top of the drain. Removed the rear panel and pulled the drain hose. Managed to extract a nail set...not a pen. Was randomly making quite a racket!
Thanks SO much!
You provided a great bit of knowledge in a fairly short time, and it was quite valuable as well! Thanks a lot for your work on this!!
Can you help me troubleshoot my mom’s dryer it’s a war pool dryer is not heating it’s me in America USA it is not healing that well could you please help me find out why my mom‘s dryer is not heating it’s a whirlpool dryer guy from Xander and
You are a legend. Thanks
what if there is something stuck between the drum, but it also stops while draining phase ?!
This guy is The Godfather of washer diagnosis
This is by far the best video on washing machine issues in youtube! Honestly, I don't know why the youtube algorithm had not brought me here before!
Thank you, sir!
Yeah, I watched like twenty before this!
Dang, I wish I would have watched this video to the end before I spent $70 on new shocks! :/
Good video. I went to tske off my rotar and the main nut was loose. Tightening that got rid of the grinding sound.
Thank you.
Dude my top loader tries to kill my family it’s not even a Samsung my mom looked inside of the washing machine after it fell over 4 towels were at one side of the drum and it happened again at night if the same day
My LG waser is making a loud squeaky noise during the wash cycle
Thank you for your informative clip!
What about a LOUD and constant sound/'humming during certain cycles?
This video is gold. This entire channel is gold mine! Thank you very much for sharing 👍🏼 Any other time we’d call a technician to fix the washer or probably just get a new one. Now with the lockdown and home quarantine... we have to do things on our own and this video is a saver. Thank you very very very very much ♥️
Amazing vid! 👏 my groaning machine had a zip tie stuck in the pump plug. Great suggestion, worked a treat. Thanks a million 😊 🙏
Brilliant Sir, thank you for all you tips. Keep safe you and yours.
Thanks again for saving me from an expensive repair. I love my 17 year old front loader. It works like a charm now.
at 7:52 - 7:58 was the noise at rinse and it goes into child lock itself; medic rinse and prewash starts blinking, help LG 5kg front loader automatic
Very useful video, thanks for your sharing❤👏🙏
Thanks, so my washer is badly broken, time to replace it.
My washing when it’s spinning sounds like a road drill no idea what is causing that
At the 10min mark with shocks. I replaced mine and it didn't help. Is it possible the top springs are defective? It's 8yrs old and banging on the spin cycle no matter how balanced the load.
Mine’s doing that after I replaced the shocks. It’s a knocking sound from the back on the spin cycle. Did you figure yours out?
I should’ve said, it was knocking before and the new shocks didn’t help..
Any update on your issue??
Wow this washer had every example of noise issues.
Very good explanations. Thank you!
Can you do another another troubleshooting video by a dryer as series of a Maytag dryer not heating
Thanks for the info ,I now know,I do need a new washer
I enjoyed listening to this presentation and I learnt a lot. Thank you!
Can you do a video but is it frustrated to call a plumber
Thank you.
He pulling stuff out like a
Magician
Very helpfull. Thank you.
Hi Thanks for the detailed troubleshooting, but I still can't figure out the cause of the scratching noise of my machine...Recently, my front loader produces some sort of scratching sounds when it’s on the washing cycle when it spins slowly. No such sound is produced in the spinning cycle when it spins at high speed. I tried to check the drum after I took the clothes out but couldn’t anything stuck in it. Any ideas for the reason?
It is possible there is something between the inner and outer tub causing that sound.. At high speed the item is being pushed out of contact by centrifugal force. Is it every load or an occasional one you are hearing this noise? What model of machine do you have and how old is it?
@@partselect thanks for getting back to me! It's most loads but not every load so I found it really weird. My machine is a BOSCH series 4 and about 6 years old. I guess I'll have to get someone to dissemble the machine to check it out?
Thank you so much
Thank you! I needed a quick diagnostic tutorial to give me ideas of where to start looking bc just to get a tech out is $140 before any repairs.
My whirlpool 2zsher just started making a thud noise would it be a belt?
Front loaders that are making a thud noise are most likely is a broken suspension shock. Your machine may also be vibrating or moving around a bit more as well.
Thanks I Appreciate all your knowledge and great video. I still don’t know how to figure out why my machine just shakes and sounds like it’s going to blowup eek 😱 rattles while’s spinning too but while washing or doing cycle it’s just vibrates the whole house and interrupting noice I’m good at fixing things but I’m afraid of appliances repair it’s expensive 😢
This guy almost makes me believe I could fix my washing machine if it broke down! I'm a computer geek and should not be allowed to touch any appliance with a wrench in my hand, I know this. But still, he ALMOST makes me believe I can!
Mine is ringing noise even it’s running or not
8:50 - have a GE front load washer that makes a chirp /squeak noise on the wash cycle when the basket changes direction. Normal sounds on all other functions.
what could be making that sound? Happens more with a larger load.
Excellent video thank you
My 2 year old at most Samsung smartthings had the banging noise it seems to be lose bolts that hold the balance weights on. 1 bolt fell out and 2 others were very loose. I tightened them back up and it seems fixed 🤞🏻
I have the same issue with Samsung washing machine which is less than 3 years ago. One bolt attaching balance weight is sheared and the other is completely loose and fell down. Do not buy any Samsung washer. They do not even toghten bolts.
You are the best, thank you and Happy New Year.
Brilliant instruction...saved me a fortune !
I have a polystyrene block which I have no idea where to put back. It came out when I removed the back. It looks like it's supposed to be dampening so I can't put it back together until I know here I goes. 😢
This is a magnificent guide. Thank you for knowing your stuff and presenting it well.
Glad you enjoyed it!
Sir, you are a star, Great job, God bless your efforts
Outstanding! So well explained.
Mine makes a squeaking noise of drum rubbing against seal and goes Da Dum Da Dum when I spin the drum. The drum freely turns with no problems. It won't spin off properly and the clothes are wringing wet when I open the door. I checked the belt and everything mentioned in this video and I still can't work out what the problem is. Nothing in the seal and the filter's clean. The machine's only 4 years old, so probably not the bearings. Also I never overload it, so I've no idea what to do with it.
Excellent video, thank you!
Awesome video
Thank you this was very helpfull
Thanks sir for complete video worthy to watch .You mentioned all problems and solution too shown practically also .👌👌👌👌👌
... chunks of disintegrating spider arm
Yeah...chunks, 1/8" by 1/8" or smaller chunks of breaking down spider arm found in filter? Checked after poor draining and eventually violent shaking clunking which came later...
I think I have that right...and it's an unhappy conclusion...