1.5" Wheel Spacers Review - Follow Up Video - Yes or No?

This is a follow up to the "How To Install" video for my Mammoth 1.5" Wheel Spacers on my 2021 Chevrolet Silverado Trail Boss? I've been on them for 500 or so miles and offer my feedback on their performance.
Purchase the same ones at: amzn.to/3kQBbtA

[@user-wo8fg3qe6u]

Ive had 2” wheel spacers on my Toyota Tundra for 9 years now with no issues, just make sure they are aligned perfectly and torqued to spec.

[@jasonmorin5209]

The 18" oem wheels have the same type of reliefs cut into the back. No grinding necessary.

[@jordanross9157]

Thanks for the video man. Looking to do the same to my 2021 Trail Boss. Have you had any issues with the tires kicking up debris and messing up your paint on the body (after installing the spacers)? I've heard that can be an issue.

[@Glock209]

I’ve had them on for years. I use red Loctite and torque to spec not one issue .

[@knightrider3766]

I know that this is an old thread, i have a 2022 mustang gt 5.0 premium with 19" tires all around with 1.5 inch spacers rear and 1.25 inch fronts, I experienced no issues, i purchaed the quinn digital torque adapter from harbor freight, spacers are torque to 130 ft. Lbs, and rim lug nuts are 150lbs, no vibrations no issues, i recommends purchasing spacers from American muscles, or CJ pony parts, i also advised to retorqued the lugs every 50- 80 miles, just for closure qnd precautions depending on road conditions/pot holes, un even pavement ...other then that, i have no complaints

[@0isbrabra0in]

@1:55 you answered my exact concern so I don't have to go take a wheel off to look. Thank you

[@michaelwilson1958]

Do you think there would be enough room in the gap if you only used a 1 inch spacer? I only need 1 inch but don't want to grind the studs down.

[@piedmont929]

do you think 2 inch spacers would work on a 2023 TB stock from factory on 20 inch tires.
.
TY

[@OMAR-gl9cp]

Nice video sir question do you have get alignment done ofter thiae spacers install?

[@MWFishing]

I did not. I did rotate my tires a few hundred miles after though.

[@peachescjr]

Thanks for install video and this update. Did you have any rubbing? Still on the factory 2” lift?

[@MWFishing]

I dont have any rubbing at all.

[@kpmedia8977]

thanks for the update. I

[@MWFishing]

You bet

[@carterdwornikiewicz2609]

lol I rock 2x 2 inch spacers stacked

[@DCRacing54]

Did you notice a difference with your turning radius?

[@MWFishing]

Not at all

[@richardalexander1838]

Funny part is, your arm and wrist are vibrating like crazy as you're videotaping. lol.

[@jalaljalal2518]

Most likely the tires, you can hear them roaring. Probably needs to be rebalanced

[@losr98]

literally all i could pay attention to

[@RaulGonzalez-fu1yb]

Haha, I saw that too. No thanks.

[@leonardcusumano3524]

What brand are the spacers

[@MWFishing]

they are Mammoth Billet spacers. Check out my video on the install. I posted the info about them.

[@thetimeznow7363]

Plenty of vibrations while driving, yikes😂

[@jbjohnson6228]

Voids warranty if they find out you had them on

[@scootermcgavin2188]

Warranty on what? Anything that goes wrong with ball joints etc, is considered a wearable item regardless of spacers. (Experience talking here, Ford at least) 😅

[@stangedude5646]

I agree. What warranty???